journal article·2016-04Open access

Mechanical and Functional Behavior of High-Temperature Ni-Ti-Pt Shape Memory Alloys

Thomas E. Buchheit, Donald F. Susan, Jordan E. Massad, James R. McElhanon, Ronald D. Noebe

Abstract

A series of Ti-rich Ni-Ti-Pt ternary alloys with 13 to 18 at. pct Pt were processed by vacuum arc melting and characterized for their transformation behavior to identify shape memory alloys (SMA) that undergo transformation between 448 K and 498 K (175 °C and 225 °C) and achieve recoverable strain exceeding 2 pct. From this broader set of compositions, three alloys containing 15.5 to 16.5 at. pct Pt exhibited transformation temperatures in the vicinity of 473 K (200 °C), thus were targeted for more detailed characterization. Preliminary microstructural evaluation of these three compositions revealed a martensitic microstructure with small amounts of Ti2(Ni,Pt) particles. Room temperature mechanical testing gave a response characteristic of martensitic de-twinning followed by a typical work-hardening behavior to failure. Elevated mechanical testing, performed while the materials were in the austenitic state, revealed yield stresses of approximately 500 MPa and 3.5 pct elongation to failure. Thermal strain recovery characteristics were more carefully investigated with unbiased incremental strain-temperature tests across the 1 to 5 pct strain range, as well as cyclic strain-temperature tests at 3 pct strain. The unbiased shape recovery results indicated a complicated strain recovery path, dependent on prestrain level, but overall acceptable SMA behavior within the targeted temperature and recoverable strain range.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. J. Ma, I. Karaman, and R.D. Noebe: International Materials Reviews, 2010, vol. 55, no. 5, pp 257-315.10.1179/095066010X12646898728363 ↗
2. O. Rios, R. Noebe, T. Biles, A. Garg, A. Palczer, D. Scheiman, H.J. Seifert, M. Kaufman: Smart Structures and Materials 2005 Active Materials: Behavior and Mechanics, SPIE Vol. 5761, pp. 376-387.
3. P.G. Lindquist and C.M. Wayman: Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann, London, 1990, pp. 58–68.10.1016/B978-0-7506-1009-4.50009-3 ↗
4. Y. Takahashi, M. Tsuji, J. Sakurai, H. Hosada, K. Wakashima, S. Miyazaki: Transactions of the Materials Research Society of Japan, 2003, vol. 28, no. 3, pp. 627-630.
5. H. Hosoda, M. Tsuji, Y. Takahashi, T. Inamura, K. Wakashima, Y. Yamabe-Mitarai, S. Miyazaki, and K. Inoue, Materials Science Forum, 2003, Vols. 426-432, pp. 2333-2338.10.4028/www.scientific.net/MSF.426-432.2333 ↗
6. R. Noebe, D. Gaydosh, S. Padula II, A. Garg, T. Biles, M. Nathal, Smart Structures and Materials 2005 Active Materials: Behavior and Mechanics, SPIE Vol. 5761, pp. 364-375.
7. Y. Takahashi, T. Inamura, J. Sakurai, H. Hosoda, K. Wakashima, S. Miyazaki, Transactions of the Materials Research Society of Japan, 2004, vol. 29, no. 7, pp. 3005-3008.
8. R. Noebe, S. Draper, D. Gaydosh, A. Garg, B. Lerch. N. Penney, G. Bigelow, S. Padula II, and J. Brown: SMST 2006: Proceedings of the International Conference on Shape Memory and Superelastic Technologies, ASM International, Metals Park, OH, 2008, pp. 409–26.
9. R. Noebe, S. Padula II, G. Bigelow, O. Rios, A. Garg, and B. Lerch: SPIE, vol. 6170, pp. 617010-1–13.10.1117/12.658023 ↗
10. S. Padula II, Qiu, D. Gaydosh, R. Noebe, G. Bigelow, A. Garg, and R. Vaidyanathan: Metall. Mater. Trans., 2012, vol. 43A, pp. 4610–21.10.1007/s11661-012-1267-5 ↗
11. K. Otsuka and C.M. Wayman: Shape Memory Materials, Chp. 10, Cambridge University Press, Cambridge, MA, 1999.
12. G. Hudish: PhD Dissertation, Colorado School of Mines, 2013.
13. G.W.H. Hohne, W.F. Hemminger, and H.J. Flammersheim: Differential Scanning Calorimetry, Springer, Berlin, 2003, pp 116–19.10.1007/978-3-662-06710-9 ↗
14. L. Kovarik, F. Yang, A. Garg, D. Diecrks, M. Kaufman, R.D. Noebe, and M.J. Mills: Acta Materialia, vol. 58, 2010, pp.4660-4673.10.1016/j.actamat.2010.04.039 ↗
15. Y. Gau, N. Zhou, F. Yang, Y. Cui, L. Kovarik, N. Hatcher, R. Noebe, M.J. Mills, Y. Wang: Acta Materialia, 2012, vol. 60, pp. 1514-1527.10.1016/j.actamat.2011.11.043 ↗
16. J. Khalil Allafi, X. Ren, and G. Eggeler: Acta Materialia, 2002, vol. 50, pp. 793–803.10.1016/S1359-6454(01)00385-8 ↗
17. F. Yang, R.D. Noebe, and M.J. Mills: Scripta Materialia, 2013, vol. 69, 713-715.10.1016/j.scriptamat.2013.08.002 ↗
18. T.E. Buchheit, D.A. LaVan, J.R. Michael, T.R. Christenson, and S.D. Leith: Metallurgical and Materials Transactions A, 2002, vol. 33, pp. 539-554.10.1007/s11661-002-0116-3 ↗
19. J.A. Monroe, I. Karaman, D.C. Lagoudas, G. Bigelow, R.D. Noebe, and S. Padula II: Scripta Materialia, 2011, vol. 65, pp 123-126.10.1016/j.scriptamat.2011.03.019 ↗
20. S. Qiu, V.B. Krishnan, S.A. Padula, R.D. Noebe, D.W. Brown, B Clausen, R. Vaidyanathan, Applied Physics Letters, 2009, vol. 95, 141906.10.1063/1.3245308 ↗
21. J.A. Monroe, personal communication, Texas A&M University, 2013.
22. O. Benafan, S.A. Padula, R.D. Noebe, T.A. Sisneros, R. Vaidyanathan: Journal of Applied Physics, 2012, vol. 112, 093510.10.1063/1.4764313 ↗
23. H.C. Donkersloot and J.H.N. Van Vucht: J. Less-Common Metals, 1970, vol. 20, pp. 83-91.10.1016/0022-5088(70)90092-5 ↗