Achieving a Columnar-to-Equiaxed Transition Through Dendrite Twinning in High Deposition Rate Additively Manufactured Titanium Alloys
Source abstract
Abstract
Abstract The coarse β-grain structures typically found in titanium alloys like Ti–6Al–4V (wt pct, Ti64) and Ti–6Al–2Sn–4Zr–2Mo–0.1Si (Ti6242), produced by high deposition rate additive manufacturing (AM) processes, are detrimental to mechanical performance. Certain modified processing conditions have been shown to lead to a more refined grain structure, which has generally been attributed to a change in the solidification conditions with respect to the experimental Hunt diagram proposed by Semiatin and Kobryn. It is shown that with Wire Arc AM (WAAM) increasing the wire feed speed (WFS) is effective in promoting a columnar-equiaxed transition (CET). Conversely, estimates of the dendrite-tip undercooling using the KGT model suggest that this will be too small for free nucleation without the addition of artificial nucleants, due to the very low solute partitioning in Ti alloys. It is also shown that it is difficult to promote a CET with plasma transferred arc WAAM as computational fluid dynamics (CFD) melt-pool simulations indicate that the solidification parameters remain within the columnar region on the Semiatin-Kobryn Hunt map, within the constraints of a stable process. However, a high fraction of twin boundaries was observed in the refined β-grain structures seen at high WFS. This has been attributed to departure of $$\left\langle {001} \right\rangle \beta $$ alignment from the direction of maximum thermal gradient, caused by the curvature of the fusion boundary, stimulating dendrite twinning during solidification. In addition, it is shown that increasing the WFS leads to a change in melt-pool geometry and a reduction of remelt depth, which promoted dendrite twinning and grain refinement.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. S.W. Williams, F. Martina, A.C. Addison, J. Ding, G. Pardal, and P.A. Colegrove: Mater. Sci. Technol., 2016, vol. 32(7), pp. 641–47. https://doi.org/10.1179/1743284715Y.0000000073.10.1179/1743284715Y.0000000073 ↗
2. D. Ding, Z. Pan, D. Cuiuri, and H. Li: Int. J. Adv. Manuf. Technol., 2015, vol. 81(1–4), pp. 465–81. https://doi.org/10.1007/s00170-015-7077-3.10.1007/s00170-015-7077-3 ↗
3. X. Bai, et al.: Int. J. Heat Mass Transf., 2018, vol. 124, pp. 504–16. https://doi.org/10.1016/j.ijheatmasstransfer.2018.03.085.10.1016/j.ijheatmasstransfer.2018.03.085 ↗
4. A. Ho, H. Zhao, J.W. Fellowes, F. Martina, A.E. Davis, and P.B. Prangnell: Acta Mater., 2019, vol. 166, pp. 306–23. https://doi.org/10.1016/j.actamat.2018.12.038.10.1016/j.actamat.2018.12.038 ↗
5. H. Zhao, A. Ho, A.E. Davis, A.A. Antonysamy, and P.B. Prangnell: Mater Charact, 2019, vol. 147, pp. 131–45. https://doi.org/10.1016/j.matchar.2018.10.027.10.1016/j.matchar.2018.10.027 ↗
6. A. Caballero, et al.: Philos. Mag., 2022, vol. 102(22), pp. 2256–81. https://doi.org/10.1080/14786435.2022.2113470.10.1080/14786435.2022.2113470 ↗
7. J. Wang, et al.: J. Alloys Compd., 2018, vol. 768, pp. 97–113. https://doi.org/10.1016/j.jallcom.2018.07.235.10.1016/j.jallcom.2018.07.235 ↗
8. F. Martina, S.W. Williams, and P.A. Colegrove: Improved microstructure and increased mechanical properties of additive manufacture produced Ti-6Al-4V by interpass cold rolling. in SFF Symp., pp. 490–96, 2013, https://doi.org/10.1007/s13398-014-0173-7.2.10.1007/s13398-014-0173-7.2 ↗
9. M.J. Bermingham, D.H. StJohn, J. Krynen, S. Tedman-Jones, and M.S. Dargusch: Acta Mater., 2019, vol. 168, pp. 261–74. https://doi.org/10.1016/j.actamat.2019.02.020.10.1016/j.actamat.2019.02.020 ↗
10. F. Wang, S.W. Williams, P.A. Colegrove, and A.A. Antonysamy: Metall. Mater. Trans. Phys. Metall. Mater. Sci., 2013, vol. 44(2), pp. 968–77. https://doi.org/10.1007/s11661-012-1444-6.10.1007/s11661-012-1444-6 ↗
11. L. Neto, S.W. Williams, J. Ding, J.R. Hönnige, and F. Martina: Mechanical Properties Enhancement of Additive Manufactured Ti-6Al-4V by Machine Hammer Peening. in Adv. Surf. Enhanc. 1st Int. Conf. Adv. Surf. Enhanc., vol. 1, pp. 121–32, 2020. https://doi.org/10.1007/978-981-15-0054-1.10.1007/978-981-15-0054-1 ↗
12. A.K. Syed, et al.: Mater. Sci. Eng. A, 2021, vol. 814, p. 141194. https://doi.org/10.1016/j.msea.2021.141194.10.1016/j.msea.2021.141194 ↗
13. X. Zhang, F. Martina, J. Ding, X. Wang, and S.W. Williams: Fatigue Fract. Eng. Mater. Struct., 2017, vol. 40(5), pp. 790–803. https://doi.org/10.1111/ffe.12547.10.1111/ffe.12547 ↗
14. E. Brandl, B. Baufeld, C. Leyens, and R. Gault: Phys. Procedia, 2010, vol. 5(2), pp. 595–606. https://doi.org/10.1016/j.phpro.2010.08.087.10.1016/j.phpro.2010.08.087 ↗
15. S.M. Kelly and S.L. Kampe: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1861–67. https://doi.org/10.1007/s11661-004-0095-7.10.1007/s11661-004-0095-7 ↗
16. S.M. Kelly and S.L. Kampe: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1869–79.10.1007/s11661-004-0095-7 ↗
17. J.W. Elmer, T.A. Palmer, and J. Wong: J. Appl. Phys., 2003, vol. 93(4), pp. 1941–47. https://doi.org/10.1063/1.1537464.10.1063/1.1537464 ↗
18. S. Malinov, P. Markovsky, W. Sha, and Z. Guo: J. Alloys Compd., 2001, vol. 314, pp. 181–92. https://doi.org/10.1016/S0925-8388(00)01227-5.10.1016/S0925-8388(00)01227-5 ↗
19. G. Lütjering and J.C. Williams: Titanium, Springer, New York, 2007.
20. D. Lunt, et al.: Mater. Sci. Eng. A, 2020, vol. 788, p.139608. https://doi.org/10.1016/j.msea.2020.139608.10.1016/j.msea.2020.139608 ↗
21. M.J. Bermingham, S.D. McDonald, M.S. Dargusch, and D.H. St.John: J. Mater. Res., 2008, vol. 23(1), pp. 97–104. https://doi.org/10.1557/jmr.2008.0002.10.1557/jmr.2008.0002 ↗
22. T. Lyman: Atlas of Microstructures of Industrial Alloys. American Society for Metals, 1972.
23. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, vol. 3. 1992. https://doi.org/10.1146/annurev.ms.03.080173.001551.10.1146/annurev.ms.03.080173.001551 ↗
24. S.A. David and J.M. Vitek: Int. Mater. Rev., 1989, vol. 34(1), pp. 213–45. https://doi.org/10.1179/imr.1989.34.1.213.10.1179/imr.1989.34.1.213 ↗
25. S.A. David, S.S. Babu, and J.M. Vitek: JOM, 2003, vol. 55(6), pp. 14–20. https://doi.org/10.1007/s11837-003-0134-7.10.1007/s11837-003-0134-7 ↗
26. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65(1), pp. 75–83. https://doi.org/10.1016/0025-5416(84)90201-5.10.1016/0025-5416(84)90201-5 ↗
27. W. Kurz, C. Bezençon, and M. Gäumann: Sci. Technol. Adv. Mater., 2001, vol. 2(1), pp. 185–91. https://doi.org/10.1016/S1468-6996(01)00047-X.10.1016/S1468-6996(01)00047-X ↗
28. H. Nguyen-Thi, et al.: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1458–64. https://doi.org/10.1007/s11661-007-9170-1.10.1007/s11661-007-9170-1 ↗
29. J.R. Kennedy, et al.: Mater Charact, 2021, vol. 182, p. 111577. https://doi.org/10.1016/j.matchar.2021.111577.10.1016/j.matchar.2021.111577 ↗
30. J.R. Hönnige, et al.: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 3692–3703.10.1007/s11661-020-05781-6 ↗
31. S.L. Semiatin, J.C. Soper, and I.M. Sukonnik: Acta Metall., 1996, vol. 44(5), pp. 1979–86. https://doi.org/10.1016/1359-6454(95)00311-8.10.1016/1359-6454(95)00311-8 ↗
32. A.E. Davis, J.R. Kennedy, J. Ding, and P.B. Prangnell: Mater Charact, 2020, vol. 163, p. 110298. https://doi.org/10.1016/j.matchar.2020.110298.10.1016/j.matchar.2020.110298 ↗
33. J. Donoghue, A.A. Antonysamy, F. Martina, P.A. Colegrove, S.W. Williams, and P.B. Prangnell: Mater Charact, 2016, vol. 114, pp. 103–14. https://doi.org/10.1016/j.matchar.2016.02.001.10.1016/j.matchar.2016.02.001 ↗
34. J.R. Kennedy, et al.: Mater. Lett. X, 2020, vol. 8, p. 100057. https://doi.org/10.1016/j.mlblux.2020.100057.10.1016/j.mlblux.2020.100057 ↗
35. J.R. Kennedy, A.E. Davis, A. Caballero, S.W. Williams, E.J. Pickering, and P.B. Prangnell: Addit. Manuf., 2021, vol. 40, p. 101928. https://doi.org/10.1016/j.addma.2021.101928.10.1016/j.addma.2021.101928 ↗
36. J.R. Kennedy, et al.: J. Alloys Compd., 2022, vol. 895, p. 162735. https://doi.org/10.1016/j.jallcom.2021.162735.10.1016/j.jallcom.2021.162735 ↗
37. K. Zhang, et al.: Mater. Des., 2019, vol. 184, p. 108191. https://doi.org/10.1016/j.matdes.2019.108191.10.1016/j.matdes.2019.108191 ↗
38. C.J. Todaro, et al.: Nat. Commun., 2020, vol. 11(1), p. 142. https://doi.org/10.1038/s41467-019-13874-z.10.1038/s41467-019-13874-z ↗
39. F. Wang, S.W. Williams, and M. Rush: Int. J. Adv. Manuf. Technol., 2011, vol. 57(5–8), pp. 597–603. https://doi.org/10.1007/s00170-011-3299-1.10.1007/s00170-011-3299-1 ↗
40. E. Farabi, T. Klein, M. Schnall, and S. Primig: Addit. Manuf., 2023, https://doi.org/10.1016/j.addma.2023.103592.10.1016/j.addma.2023.103592 ↗
41. A.I. Saville, et al.: Addit. Manuf., 2021, vol. 46, p. 102118. https://doi.org/10.1016/j.addma.2021.102118.10.1016/j.addma.2021.102118 ↗
42. A.E. Davis, J.R. Kennedy, D. Strong, D. Kovalchuk, S. Porter, and P.B. Prangnell: Materialia, 2021, vol. 20, p. 101202. https://doi.org/10.1016/j.mtla.2021.101202.10.1016/j.mtla.2021.101202 ↗
43. C. Jing, et al.: Mater. Sci. Eng. A, 2022, vol. 845, p. 143223. https://doi.org/10.1016/j.msea.2022.143223.10.1016/j.msea.2022.143223 ↗
44. B. Wu, et al.: Addit. Manuf., 2022, vol. 54, p. 102723. https://doi.org/10.1016/j.addma.2022.102723.10.1016/j.addma.2022.102723 ↗
45. J. Wang, et al.: Mater. Sci. Eng. A, 2020, vol. 772, p. 138703. https://doi.org/10.1016/j.msea.2019.138703.10.1016/j.msea.2019.138703 ↗
46. P.A. Kobryn and S.L. Semiatin: J. Mater. Process. Technol., 2003, vol. 135(2–3), pp. 330–39. https://doi.org/10.1016/S0924-0136(02)00865-8.10.1016/S0924-0136(02)00865-8 ↗
47. W. Kurz, B. Giovanola, and R. Trivedi. Acta Metall., 1985.
48. J. Wainwright: Grain Structure Control of Titanium Alloys During Wire + Arc Additive Manufacturing, Cranfield University, Bedford, 2023.
49. J. Wainwright, S. Williams, and J. Ding: Addit. Manuf., 2023, vol. 74, p. 103712. https://doi.org/10.1016/j.addma.2023.103712.10.1016/j.addma.2023.103712 ↗
50. P.S. Davies: An Investigation of Microstructure and Texture Evolution in the Near-α Titanium Alloy Timetal 834, University of Sheffield, Sheffield, 2009.
51. P.S. Davies, B.P. Wynne, W.M. Rainforth, M.J. Thomas, and P.L. Threadgill: Metall. Mater. Trans. Phys. Metall. Mater. Sci., 2011, vol. 42(8), pp. 2278–89. https://doi.org/10.1007/s11661-011-0606-2.10.1007/s11661-011-0606-2 ↗
52. G. Ivantsov: Dokl. Akad. Nauk SSSR, 1947, vol. 58, pp. 567–69.
53. J. Strickland, B. Nenchev, and H. Dong: Crystals, 2020, vol. 10(7), p. 627. https://doi.org/10.3390/cryst10070627.10.3390/cryst10070627 ↗
54. W.W. Mullins and R.F. Sekerka: Stability of a Planar Interface During Solidification of a Dilute Binary Alloy, in Dynamics of Curved Fronts, Elsevier, 1988, pp. 345–52. https://doi.org/10.1016/B978-0-08-092523-3.50037-X.10.1016/B978-0-08-092523-3.50037-X ↗
55. W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29(1), pp. 11–20. https://doi.org/10.1016/0001-6160(81)90082-1.10.1016/0001-6160(81)90082-1 ↗
56. J.S. Langer and H. Muller-Krumbhaar: Stability Effects in Dendritic Crystal Growth t’.
57. C.-A. Gandin and M. Rappaz: Acta Mater., 1997, vol. 45(5), pp. 2187–95. https://doi.org/10.1016/S1359-6454(96)00303-5.10.1016/S1359-6454(96)00303-5 ↗
58. J.-O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26(2), pp. 273–312. https://doi.org/10.1016/S0364-5916(02)00037-8.10.1016/S0364-5916(02)00037-8 ↗
59. D.M. Stefanescu: Equilibrium and non-equilibrium during solidification. in Science and Engineering of Casting Solidification, Second Edition. Boston: Springer, 2009, pp. 1–20. https://doi.org/10.1007/978-0-387-74612-8_2.10.1007/978-0-387-74612-8_2 ↗
60. D. Dreelan: Meso-scale Grain Structure Prediction Models for Metallic Additive Manufacturing Processes, PhD Thesis, University College Dublin, 2022.
61. L. Wu and J. Zhang: JOM, 2018, vol. 70(10), pp. 2392–99. https://doi.org/10.1007/s11837-018-3057-z.10.1007/s11837-018-3057-z ↗
62. R.E. Rozas, L.G. MacDowell, P.G. Toledo, and J. Horbach: J. Chem. Phys., 2021, vol. 154(18), p. 184704. https://doi.org/10.1063/5.0049131.10.1063/5.0049131 ↗
63. L. Ding, et al.: Metals, 2020, vol. 10(8), p. 989. https://doi.org/10.3390/met10080989.10.3390/met10080989 ↗
64. J. Song, L. Wang, L. Zhang, W. Wu, and Z. Gao: J. Mol. Liq., 2020, vol. 315, p. 113606. https://doi.org/10.1016/j.molliq.2020.113606.10.1016/j.molliq.2020.113606 ↗
65. X. Chen, C. Wang, J. Ding, P. Bridgeman, and S. Williams: J. Manuf. Process., 2022, vol. 83, pp. 300–12. https://doi.org/10.1016/j.jmapro.2022.09.012.10.1016/j.jmapro.2022.09.012 ↗
66. C.W. Hirt and B.D. Nichols: J. Comput. Phys., 1981, vol. 39(1), pp. 201–25. https://doi.org/10.1016/0021-9991(81)90145-5.10.1016/0021-9991(81)90145-5 ↗
67. V.R. Voller, A.D. Brent, and C. Prakash: Int. J. Heat Mass Transf., 1989, vol. 32(9), pp. 1719–31. https://doi.org/10.1016/0017-9310(89)90054-9.10.1016/0017-9310(89)90054-9 ↗
68. R. Hu, X. Chen, G. Yang, S. Gong, and S. Pang: Int. J. Heat Mass Transf., 2018, vol. 126, pp. 877–87. https://doi.org/10.1016/j.ijheatmasstransfer.2018.06.033.10.1016/j.ijheatmasstransfer.2018.06.033 ↗
69. B.A. Welk, N. Taylor, Z. Kloenne, K.J. Chaput, S. Fox, and H.L. Fraser: Metall. Mater. Trans. Phys. Metall. Mater. Sci., 2021, vol. 52(12), pp. 5367–80. https://doi.org/10.1007/s11661-021-06475-3.10.1007/s11661-021-06475-3 ↗
70. R.P. Mooney, et al.: Comput. Mater. Sci., 2022, vol. 210, p. 111436. https://doi.org/10.1016/j.commatsci.2022.111436.10.1016/j.commatsci.2022.111436 ↗
71. P. Schempp, Z. Tang, C. Cross, T. Seefeld, A. Pittner, and M. Rethmeier: Trends Weld. Res. 2012.
72. R.C. Atwood, P.D. Lee, R.S. Minisandram, and R.M.F. Jones: J. Mater. Sci., 2004, vol. 39(24), pp. 7193–97. https://doi.org/10.1023/B:JMSC.0000048731.42495.1c.10.1023/B:JMSC.0000048731.42495.1c ↗
73. Q. Liu, X. Li, and Y. Jiang: Vacuum, 2017, vol. 141, pp. 1–9. https://doi.org/10.1016/j.vacuum.2017.03.009.10.1016/j.vacuum.2017.03.009 ↗
74. Q.-L. Liu, X.-M. Li, and Y.-H. Jiang: J. Mater. Res., 2017, vol. 32(16), pp. 3175–82. https://doi.org/10.1557/jmr.2017.174.10.1557/jmr.2017.174 ↗
75. J.K. Mackenzie: Second Paper on Statistics Associated with the Random Disorientation of Cubes.
76. A.A. Nayeb-Hashemi and J.B. Clark: Phase Diagrams of Binary Magnesium Alloys, ASM International, Detroit, 1988.
77. A.E. Davis, A.E. Caballero, R. Biswal, S.W. Williams, and P.B. Prangnell: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 3833–52. https://doi.org/10.1007/s11661-022-06811-1.10.1007/s11661-022-06811-1 ↗
78. E. Bertrand, P. Castany, I. Péron, and T. Gloriant: Scr. Mater., 2011, vol. 64(12), pp. 1110–13. https://doi.org/10.1016/j.scriptamat.2011.02.033.10.1016/j.scriptamat.2011.02.033 ↗
79. S. Hanada and O. Izumi: Metall. Trans. A, 1986, vol. 17, pp. 1409–20.10.1007/BF02650122 ↗
80. A. Greer, A. Bunn, A. Tronche, P. Evans, and D. Bristow: Acta Mater., 2000, vol. 48, pp. 2823–35.10.1016/S1359-6454(00)00094-X ↗
81. J.L. McClure and A. Cezairliyan: Int. J. Thermophys., 1992, vol. 13(1), pp. 75–81. https://doi.org/10.1007/BF00503357.10.1007/BF00503357 ↗
82. D. Bandyopadhyay, R.C. Sharma, and N. Chakraborti: J. Phase Equilibria, 2000, vol. 21(2), pp. 179–85. https://doi.org/10.1361/105497100770340246.10.1361/105497100770340246 ↗
83. M.A. Salgado-Ordorica and M. Rappaz: Acta Mater., 2008, vol. 56(19), pp. 5708–18. https://doi.org/10.1016/j.actamat.2008.07.046.10.1016/j.actamat.2008.07.046 ↗
84. M.A. Salgado-Ordorica, J.-L. Desbiolles, and M. Rappaz: Acta Mater., 2011, vol. 59(13), pp. 5074–84. https://doi.org/10.1016/j.actamat.2011.04.033.10.1016/j.actamat.2011.04.033 ↗
85. J.J. Hoyt and M. Asta: Phys. Rev. B, 2002, vol. 65(21), p. 214106. https://doi.org/10.1103/PhysRevB.65.214106.10.1103/PhysRevB.65.214106 ↗
86. Ø. Grong and I. of M. (Great Britain), Metallurgical Modelling of Welding. in Book (Institute of Materials (Great Britain))). Institute of Materials, 1997. https://books.google.co.uk/books?id=JwNUAAAAMAAJ.
87. A. Caballero: Dilution study Ti-6Al-4V LAMP project, 2018.
88. K. Weman: Welding Processes Handbook, Woodhead Publishing Limited, Cambridge, 2012.
89. N. Ren, J. Li, N. Bogdan, M. Xia, and J. Li: Comput. Mater. Sci., 2020, vol. 180, p. 109714. https://doi.org/10.1016/j.commatsci.2020.109714.10.1016/j.commatsci.2020.109714 ↗
90. C. Cayron: Scr. Mater., 2008, vol. 59(5), pp. 570–73. https://doi.org/10.1016/j.scriptamat.2008.05.013.10.1016/j.scriptamat.2008.05.013 ↗
91. A.A. Antonysamy, J. Meyer, and P.B. Prangnell: Mater Charact, 2013, vol. 84, pp. 153–68. https://doi.org/10.1016/j.matchar.2013.07.012.10.1016/j.matchar.2013.07.012 ↗