Tracing the Effects of Calcium, Stannum, and Zinc Additions on the Creep Resistance of Mg–Al-Based Alloys
Source abstract
Abstract
In this work, the effects of Ca, Sn, and Zn additions on the creep resistance of Mg–Al-based alloys were systematically traced at 453 K. The best creep resistance was obtained in Mg–6Al–1Ca (AX61) alloy followed by Mg–6Al–1Zn (AZ61) and Mg–6Al–1Sn (AT61) alloys, albeit the highest yield stress was obtained in AZ61 alloy at both room temperature and creep temperature. Specifically, for AT61 alloy, unsharp solution strengthening, ineffective precipitation strengthening, and long slip traces derived from prismatic 〈a〉 dislocations were responsible for the fastest creep rate and the most diminished creep resistance. For AZ61 alloy, the highest fraction of dynamic precipitates was achieved, creating the most serious depletion of solution strengthening. But due to the close connection between precipitates and dislocations, the effective precipitation strengthening avoided the weak creep resistance like the case in AT61 alloy. For AX61 alloy, strong solution strengthening and stable dislocation networks composed by prismatic 〈a〉 dislocations simultaneously reduced the creep rate. The limited loss of solution strengthening and the interrupted basal slip transitivity between neighboring grains also enhanced the creep resistance. Thus, it is strongly recommended that adding Ca element into Mg–Al-based alloys has a positive effect on the creep resistance via controlling solution strengthening and dislocation morphologies.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Q. Huo, X. Yang, J. Ma, H. Sun, J. Qin, and Y. Jiang: Mater. Charact., 2013, vol. 29, pp. 43–51.10.1016/j.matchar.2013.03.001 ↗
2. J.U. Lee, Y.J. Kim, and S.H. Park: Mater. Sci. Eng. A, 2022, vol. 854, p. 143814.10.1016/j.msea.2022.143814 ↗
3. A. Jamali, A. Ma, and J. LLorca: Acta Mater., 2022, vol. 239, p. 118263.10.1016/j.actamat.2022.118263 ↗
4. T. Chen, S. Hu, S. Li, and Q. Huo: Mater. Sci. Eng. A, 2022, vol. 857, p. 144056.10.1016/j.msea.2022.144056 ↗
5. P. Nautiyal, J. Jain, and A. Agarwal: Mater. Sci. Eng. A, 2015, vol. 630, pp. 131–38.10.1016/j.msea.2015.01.075 ↗
6. S. Spigarelli: Scripta Mater., 2000, vol. 42, pp. 397–402.10.1016/S1359-6462(99)00361-9 ↗
7. J.F. Nie: Scripta Mater., 2003, vol. 48, pp. 1009–15.10.1016/S1359-6462(02)00497-9 ↗
8. B. Amir Esgandari, H. Mehrjoo, B. Nami, and S.M. Miresmaeili: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5018–24.10.1016/j.msea.2011.03.022 ↗
9. S.M. Ashrafizadeh, R. Mahmudi, and A.R. Geranmayeh: Mater. Sci. Eng. A, 2020, vol. 790, p. 139712.10.1016/j.msea.2020.139712 ↗
10. N. Kashefi and R. Mahmudi: Mater. Des., 2012, vol. 39, pp. 200–10.10.1016/j.matdes.2012.02.036 ↗
11. A.R. Geranmayeh and R. Mahmudi: Mater. Sci. Eng. A, 2014, vol. 614, pp. 311–18.10.1016/j.msea.2014.07.058 ↗
12. J. Majhi and A.K. Mondal: Mater. Sci. Eng. A, 2019, vol. 744, pp. 691–703.10.1016/j.msea.2018.12.067 ↗
13. C.R. Hutchinson, J.F. Nie, and S. Gorsse: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2093–2105.10.1007/s11661-005-0330-x ↗
14. P. Hidalgo-Manrique and J.D. Robson: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 3855–67.10.1007/s11661-019-05301-1 ↗
15. S.M. Ashrafizadeh and R. Mahmudi: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5957–68.10.1007/s11661-019-05471-y ↗
16. F. Khomamizadeh, B. Nami, and S. Khoshkhooei: Metall Mater. Trans. A, 2005, vol. 36A, pp. 3489–94.10.1007/s11661-005-0022-6 ↗
17. F. Kabirian and R. Mahmudi: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3488–98.10.1007/s11661-010-0398-9 ↗
18. T. Nakata, C. Xu, R. Ajima, K. Shimizu, S. Hanaki, T.T. Sasaki, L. Ma, K. Hono, and S. Kamado: Acta Mater., 2017, vol. 130, pp. 261–70.10.1016/j.actamat.2017.03.046 ↗
19. M.R. Sahu, T.S.S. Kumar, and U. Chakkingal: J. Magnesium Alloys, 2022, vol. 10, pp. 2094–2117.10.1016/j.jma.2022.08.002 ↗
20. S. Li, Q. Huo, S. Hu, C. Wang, Z. Zhang, Y. Zhang, T. Chen, and X. Yang: Mater. Charact., 2023, vol. 195, p. 112534.10.1016/j.matchar.2022.112534 ↗
21. J. Li, X. Zhou, J. Su, B. Breitbach, M.L. Chwałek, H. Wang, and G. Dehm: Mater. Sci. Eng. A, 2022, vol. 856, p. 143898.10.1016/j.msea.2022.143898 ↗
22. T.T. Sasaki, K. Oh-ishi, T. Ohkubo, and K. Hono: Scripta Mater., 2006, vol. 55, pp. 251–54.10.1016/j.scriptamat.2006.04.005 ↗
23. T.T. Sasaki, K. Oh-ishi, T. Ohkubo, and K. Hono: Mater. Sci. Eng. A, 2011, vol. 530, pp. 1–8.10.1016/j.msea.2010.05.010 ↗
24. R.E. Schäublin, M. Becker, M. Cihova, S.S.A. Gerstl, D. Deiana, C. Hébert, S. Pogatscher, P.J. Uggowitzer, and J.F. Löffler: Acta Mater., 2022, vol. 239, p. 118223.10.1016/j.actamat.2022.118223 ↗
25. B. Kondori and R. Mahmudi: Mater. Sci. Eng. A, 2017, vol. 700, pp. 438–47.10.1016/j.msea.2017.06.007 ↗
26. M.A. Gibson, X. Fang, C.J. Bettles, and C.R. Hutchinson: Scripta Mater., 2010, vol. 63, pp. 899–902.10.1016/j.scriptamat.2010.07.002 ↗
27. D.H. Kang, S.S. Park, and N.J. Kim: Mater. Sci. Eng. A, 2005, vol. 413–414, pp. 555–60.10.1016/j.msea.2005.09.022 ↗
28. J. Miao, C. Zhang, A.D. Klarner, J. Zhang, E. Cinkilic, F. Zhang, and A.A. Luo: Materialia, 2022, vol. 21, p. 101348.10.1016/j.mtla.2022.101348 ↗
29. J. Li, X. Zhou, A. Breen, Z. Peng, J. Su, P. Kürnsteiner, M.J.D. Correa, M.L. Chwałek, H. Wang, D. Holec, J. Mayer, and G. Dehm: J. Alloys Compd., 2022, vol. 928, p. 167177.10.1016/j.jallcom.2022.167177 ↗
30. A.A. Luo, P. Fu, L. Peng, X. Kang, Z. Li, and T. Zhu: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 360–68.10.1007/s11661-011-0820-y ↗
31. A.S.H. Kabir, M. Sanjari, J. Su, I. Jung, and S. Yue: J. Mater. Sci., 2016, vol. 51, pp. 1600–09.10.1007/s10853-015-9483-1 ↗
32. S.M. Zhu, B.L. Mordike, and J.F. Nie: Mater. Sci. Eng. A, 2008, vol. 483–484, pp. 583–86.10.1016/j.msea.2006.09.154 ↗
33. B.H. Kim, K.C. Park, Y.H. Park, and I.M. Park: Mater. Sci. Eng. A, 2011, vol. 528, pp. 808–14.10.1016/j.msea.2010.10.038 ↗
34. A. Bahmani, S. Arthanari, and K.S. Shin: J. Magnesium Alloys, 2019, vol. 7, pp. 38–46.10.1016/j.jma.2018.11.004 ↗
35. S. Avraham, A. Katsman, and M. Bamberger: J. Mater. Sci., 2011, vol. 46, pp. 6941–51.10.1007/s10853-011-5660-z ↗
36. T. Nakata, C. Xu, Y. Uehara, T.T. Sasaki, and S. Kamado: J. Alloys Compd., 2019, vol. 782, pp. 304–14.10.1016/j.jallcom.2018.12.194 ↗
37. X. Huang, K. Suzuki, Y. Chino, and M. Mabuchi: J. Alloys Compd., 2015, vol. 632, pp. 94–102.10.1016/j.jallcom.2015.01.148 ↗
38. Y. Zhang, T. Chen, J. Kuang, and Q. Huo: Metall. Mater. Trans. A, 2022, vol. 3A, pp. 747–53.10.1007/s11661-021-06578-x ↗
39. C. Wang, Y. Zhang, Q. Huo, Z. Zhang, J. Tang, A. Hashimoto, and X. Yang: Mater. Sci. Eng. A, 2021, vol. 800, p. 140309.10.1016/j.msea.2020.140309 ↗
40. S. Hu, Q. Huo, C. Wang, Y. Zhang, Z. Zhang, S. Xu, and X. Yang: J. Alloys Compd., 2022, vol. 895, p. 162666.10.1016/j.jallcom.2021.162666 ↗
41. Y. Zhang, Q. Huo, Z. Zhang, C. Wang, H. Nagaumi, and X. Yang: Mater. Sci. Eng. A, 2022, vol. 839, p. 142894.10.1016/j.msea.2022.142894 ↗
42. D. Nagarajan: Mater. Sci. Eng. A, 2022, vol. 860, p. 144292.10.1016/j.msea.2022.144292 ↗
43. B. Kim, B. Kang, Y. Park, and I. Park: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5747–53.10.1016/j.msea.2011.04.005 ↗
44. S.M. Jo, S.D. Kim, T. Kim, Y. Go, C. Yang, B.S. You, and Y.M. Kim: J. Alloys Compd., 2018, vol. 749, pp. 794–802.10.1016/j.jallcom.2018.03.380 ↗
45. N. Li, C. Wang, M.A. Monclús, L. Yang, and J.M. Molina-Aldareguia: Acta Mater., 2021, vol. 221, p. 117374.10.1016/j.actamat.2021.117374 ↗
46. H.S. Kim and W.J. Kim: Corros. Sci., 2013, vol. 75, pp. 228–38.10.1016/j.corsci.2013.05.032 ↗
47. M.R. Barnett, Z. Keshavarz, A.G. Beer, and D. Atwell: Acta Mater., 2004, vol. 52, pp. 5093–5103.10.1016/j.actamat.2004.07.015 ↗
48. A. Jain, O. Duygulu, D.W. Brown, C.N. Tomé, and S.R. Agnew: Mater. Sci. Eng. A, 2008, vol. 486, pp. 545–55.10.1016/j.msea.2007.09.069 ↗
49. G. Li, J. Zhang, R. Wu, S. Liu, B. Song, Y. Jiao, Q. Yang, and L. Hou: J. Alloys Compd., 2019, vol. 777, pp. 1375–85.10.1016/j.jallcom.2018.11.082 ↗
50. L. Gao, R.S. Chen, and E.H. Han: J. Alloys Compd., 2009, vol. 481, pp. 379–84.10.1016/j.jallcom.2009.02.131 ↗
51. S. Abaspour, V. Zambelli, M. Dargusch, and C.H. Cáceres: Mater. Sci. Eng. A, 2016, vol. 673, pp. 114–21.10.1016/j.msea.2016.07.019 ↗
52. B.Q. Shi, R.S. Chen, and W. Ke: J. Alloys Compd., 2011, vol. 509, pp. 3357–62.10.1016/j.jallcom.2010.12.065 ↗
53. J. Miao, W. Sun, A.D. Klarner, and A.A. Luo: Scripta Mater., 2018, vol. 154, pp. 192–96.10.1016/j.scriptamat.2018.05.047 ↗
54. M. Sarebanzadeh, A. Orozco-Caballero, and J. LLorca: Acta Mater., 2023, vol. 243, p. 118536.10.1016/j.actamat.2022.118536 ↗
55. C.M. Cepeda-Jiménez, J.M. Molina-Aldareguia, and M.T. Pérez-Prado: Acta Mater., 2015, vol. 88, pp. 232–44.10.1016/j.actamat.2015.01.032 ↗
56. Z. Zhang, Q. Huo, Z. Xiao, Y. Zhang, K. Li, H. Nagaumi, and X. Yang: J. Mater. Sci., 2022, vol. 57, pp. 2229–42.10.1007/s10853-021-06693-5 ↗
57. J. Li, J. Wu, L. Jin, M. Celikin, F. Wang, S. Dong, and J. Dong: Sci. Rep., 2021, vol. 11, p. 2860.10.1038/s41598-021-82517-5 ↗
58. Y. Liu, J. Yan, D. Xie, Y. Shen, J. Wang, and G. Zhu: Scripta Mater., 2021, vol. 191, pp. 86–89.10.1016/j.scriptamat.2020.09.014 ↗
59. D. Zhao, X. Ma, S. Picak, I. Karaman, and K. Xie: Scripta Mater., 2020, vol. 179, pp. 49–54.10.1016/j.scriptamat.2019.11.057 ↗
60. C. Wang, H. Zhang, H. Wang, G. Liu, and Q. Jiang: Scripta Mater., 2013, vol. 69, pp. 445–48.10.1016/j.scriptamat.2013.05.026 ↗