journal article·2023-05Open access

On the Impact of an Integrated HIP Treatment on the Very High Cycle Fatigue Life of Ni-Based SX Superalloys

Luciana Maria Bortoluci Ormastroni, Inmaculada Lopez-Galilea, Benjamin Ruttert, Sebastian Weber, Florent Mauget, Patrick Villechaise, Jonathan Cormier

Abstract

The influence of an integrated hot isostatic pressing (HIP) treatment was investigated for two single-crystalline nickel-based superalloys under very high cycle fatigue at 1000 °C in fully reversed conditions (Rε = − 1). The fatigue life is improved significantly by performing heat-treatments within the HIP unit. The HIP-compacted pore morphology and its impact on the crack initiation is considered as well. The HIPed specimens fail at low-angle grain boundary structures that have developed around the compacted casting pores.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. M. McLean, G.A. Webster, F.R.N. Nabarro, and A. Cottrell: Philos. Trans. R. Soc. A, 1995, vol. 351, pp. 419–33.
2. R.C. Reed: The Superalloys - Fundamentals and Applications, Cambridge University Press, Cambridge, First edit., 2006.10.1017/CBO9780511541285 ↗
3. T.M. Pollock and S. Tin: J. Propuls. Power, 2008, vol. 22, pp. 361–74.10.2514/1.18239 ↗
4. P. Caron and T. Khan: Aerosp. Sci. Technol., 1999, vol. 3, pp. 513–23.10.1016/S1270-9638(99)00108-X ↗
5. M. Perrut, P. Caron, M. Thomas, and A. Couret: Comptes Rendus Phys., 2018, vol. 19, pp. 657–71.10.1016/j.crhy.2018.10.002 ↗
6. J. Cormier and C.-A. Gandin: in Nickel Base Single Crystals Across Length Scales, G. Cailletaud, J. Cormier, G. Eggeler, V. Maurel, and L. Naze, eds., First., Elsevier, 2022, pp. 193–258.10.1016/B978-0-12-819357-0.00015-9 ↗
7. S.R. Hegde, R.M. Kearsey, and J.C. Beddoes: Miner. Met. Mater. Soc., 2008, pp. 301–10.10.7449/2008/Superalloys_2008_301_310 ↗
8. S.A. Sajjadi, S.M. Zebarjad, R.I.L. Guthrie, and M. Isac: J. Mater. Process. Technol., 2006, vol. 175, pp. 376–81.10.1016/j.jmatprotec.2005.04.021 ↗
9. S. Steuer, P. Villechaise, T.M. Pollock, and J. Cormier: Mater. Sci. Eng. A, 2015, vol. 645, pp. 109–15.10.1016/j.msea.2015.07.045 ↗
10. J. Miao, T.M. Pollock, and J. Wayne Jones: Acta Mater., 2009, vol. 57, pp. 5964–74.10.1016/j.actamat.2009.08.022 ↗
11. A. Cervellon, J. Cormier, F. Mauget, and Z. Hervier: Int. J. Fatigue, 2017, vol. 104, pp. 251–62.10.1016/j.ijfatigue.2017.07.021 ↗
12. A. Cervellon, J. Cormier, F. Mauget, Z. Hervier, and Y. Nadot: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3938–50.10.1007/s11661-018-4672-6 ↗
13. A. Cervellon, S. Hémery, P. Kürnsteiner, B. Gault, P. Kontis, and J. Cormier: Acta Mater., 2020, vol. 188, pp. 131–44.10.1016/j.actamat.2020.02.012 ↗
14. L.M. Bortoluci Ormastroni, L. Mataveli Suave, A. Cervellon, P. Villechaise, and J. Cormier: Int. J. Fatigue, 2020, vol. 130, p. 105247.10.1016/j.ijfatigue.2019.105247 ↗
15. L.M. Bortoluci Ormastroni, S. Utada, J. Rame, L. Mataveli Suave, K. Kawagishi, H. Harada, P. Villechaise, and J. Cormier: in Proceedings of the International Symposium on Superalloys 2020, S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O’brien, and A. Suzuki, eds., Springer US, Seven Springs, PA, USA, 2020, pp. 341–51.10.1007/978-3-030-51834-9_33 ↗
16. J.Z. Yi, C.J. Torbet, Q. Feng, T.M. Pollock, and J.W. Jones: Mater. Sci. Eng. A, 2007, vol. 443, pp. 142–49.10.1016/j.msea.2006.08.028 ↗
17. Z. Zhao, Q. Li, F. Zhang, W. Xu, and B. Chen: Int. J. Fatigue.
18. N.L. Loh and K.Y. Sia: J. Mater. Process. Tech., 1992, vol. 30, pp. 45–65.10.1016/0924-0136(92)90038-T ↗
19. H.V. Atkinson and S. Davies: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2981–3000.10.1007/s11661-000-0078-2 ↗
20. A.I. Epishin, T. Link, B. Fedelich, I.L. Svetlov, and E.R. Golubovskiy: MATEC Web Conf., 2014, vol. 14, p. 08003.10.1051/matecconf/20141408003 ↗
21. R.O. Ritchie, B.L. Boyce, J.P. Campbell, O. Roder, A.W. Thompson, and W.W. Milligan: Int. J. Fatigue, 1999, vol. 21, pp. 653–62.10.1016/S0142-1123(99)00024-9 ↗
22. B. Ruttert, I. Lopez-Galilea, and W. Theisen: in International Symposium on Superalloys, S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O’Brien, and A. Suzuki, eds., TMS (The Minerals, Metals & Materials Society), Palm Springs, 2020, pp. 391–407.
23. A. Cervellon, J.Z. Yi, F. Corpace, Z. Hervier, J. Rigney, P.K. Wright, C.J. Torbet, J. Cormier, J.W. Jones, and T.M. Pollock: in Proceedings of the International Symposium on Superalloys 2020, S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O’brien, and A. Suzuki, eds., Springer US, Seven Springs, PA, USA, 2020, pp. 185–95.10.1007/978-3-030-51834-9_18 ↗
24. J.B. Wahl and K. Harris: in Proceedings of International Symposium on Superalloys 2016, M.C. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S. Tin, eds., Springer US, Seven Springs, PA, USA, 2016, pp. 25–33.
25. A.B. Parsa, P. Wollgramm, H. Buck, C. Somsen, A. Kostka, I. Povstugar, P.P. Choi, D. Raabe, A. Dlouhy, J. Müller, E. Spiecker, K. Demtroder, J. Schreuer, K. Neuking, and G. Eggeler: Adv. Eng. Mater., 2015, vol. 17, pp. 216–30.10.1002/adem.201400136 ↗
26. B. Ruttert, D. Bürger, L.M. Roncery, A.B. Parsa, P. Wollgramm, G. Eggeler, and W. Theisen: Mater. Des., 2017, vol. 134, pp. 418–25.10.1016/j.matdes.2017.08.059 ↗
27. B. Ruttert, C. Meid, L. Mujica Roncery, I. Lopez-Galilea, M. Bartsch, and W. Theisen: Scr. Mater., 2018, vol. 155, pp. 139–43.10.1016/j.scriptamat.2018.06.036 ↗
28. L. Mujica Roncery, I. Lopez-Galilea, B. Ruttert, D. Bürger, P. Wollgramm, G. Eggeler, and W. Theisen: Adv. Eng. Mater., 2016, vol. 18, pp. 1381–87.10.1002/adem.201600071 ↗
29. L. Mujica Roncery, I. Lopez-Galilea, B. Ruttert, S. Huth, and W. Theisen: Mater. Des., 2016, vol. 97, pp. 544–52.10.1016/j.matdes.2016.02.051 ↗
30. A. Cervellon: PhD Thesis - Ecole Nationale Superieure de Mecanique et d’Aerotechnique (ISAE-ENSMA), Poitiers, France. https://theses.fr/2018ESMA0009, 2018.
31. S. Utada, L.M. Bortoluci Ormastroni, J. Rame, P. Villechaise, and J. Cormier: Int. J. Fatigue, 2021, vol. 148, p. 106224.10.1016/j.ijfatigue.2021.106224 ↗
32. A. Cervellon, L.M. Bortoluci Ormastroni, Z. Hervier, T.M. Pollock, F. Pedraza, and J. Cormier: Int. J. Fatigue, 2021, vol. 142, p. 105962.10.1016/j.ijfatigue.2020.105962 ↗
33. L.M. Bortoluci Ormastroni, I. Lopez-Galilea, J. Pistor, B. Ruttert, C. Körner, W. Theisen, P. Villechaise, F. Pedraza, and J. Cormier: Addit. Manuf., 2022, vol. 54, p. 102759.
34. C.L. Brundidge and T.M. Pollock: in Proceedings of International Symposium on Superalloys 2012, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P. Portella, and J. Telesman, eds., Springer US, Seven Springs, PA, USA, 2012, pp. 379–85.
35. Y. Furuya, K. Kobayashi, M. Hayakawa, M. Sakamoto, Y. Koizumi, and H. Harada: Mater. Lett., 2012, vol. 69, pp. 1–3.10.1016/j.matlet.2011.11.066 ↗
36. M.T. Kim, S.Y. Chang, and J.B. Won: Mater. Sci. Eng. A, 2006, vol. 441, pp. 126–34.10.1016/j.msea.2006.09.060 ↗
37. G. Appa Rao, M. Srinivas, and D.S. Sarma: Mater. Sci. Eng. A, 2004, vol. 383, pp. 201–12.10.1016/j.msea.2004.05.062 ↗
38. G.A. Rao, M. Kumar, M. Srinivas, and D.S. Sarma: Mater. Sci. Eng. A, 2003, vol. 355, pp. 114–25.10.1016/S0921-5093(03)00079-0 ↗
39. A. Epishin, B. Fedelich, T. Link, T. Feldmann, and I.L. Svetlov: Mater. Sci. Eng. A, 2013, vol. 586, pp. 342–49.10.1016/j.msea.2013.08.034 ↗
40. I. Lopez-Galilea, S. Huth, and W. Theisen: MATEC Web Conf., 2014, vol. 14, p. 13009.10.1051/matecconf/20141413009 ↗
41. M.S.A. Karunaratne, D.C. Cox, P. Carter, and R.C. Reed: in Proceedings of International Symposium on Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS (The Minerals, Metals & Materials Society), Seven Springs, PA, USA, 2000, pp. 263–72.10.7449/2000/Superalloys_2000_263_272 ↗
42. N. Saunders and A.P. Miodownik: CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide, First., l’ergamon, 1998.
43. X.G. Zheng, Y.N. Shi, and L.H. Lou: J. Mater. Sci. Technol., 2015, vol. 31, pp. 1151–57.10.1016/j.jmst.2015.07.004 ↗
44. S. Steuer, Z. Hervier, S. Thabart, C. Castaing, T.M. Pollock, and J. Cormier: Mater. Sci. Eng. A, 2014, vol. 601, pp. 145–52.10.1016/j.msea.2014.02.046 ↗
45. R.J. Morrissey and P.J. Golden: Int. J. Fatigue, 2007, vol. 29, pp. 2079–84.10.1016/j.ijfatigue.2007.04.003 ↗
46. M. Zhao, T. Wu, Z. Zhao, L. Liu, G. Luo, and W. Chen: Appl. Sci., 2020, vol. 10, pp. 1–4.
47. S. Stanzl-Tschegg: Int. J. Fatigue, 2014, vol. 60, pp. 2–17.10.1016/j.ijfatigue.2012.11.016 ↗
48. M. Lamm and R.F. Singer: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1177–83.10.1007/s11661-007-9188-4 ↗
49. M.R.G. Prasad, S. Gao, N. Vajragupta, and A. Hartmaier: Crystals, 2020, vol. 10, pp. 1–5.
50. A. Harte, M. Atkinson, M. Preuss, and J. Quinta da Fonseca: Acta Mater., 2020, vol. 195, pp. 555–70.10.1016/j.actamat.2020.05.029 ↗
51. B. Ruttert, O. Horst, I. Lopez-galilea, D. Langenkämper, A. Kostka, C. Somsen, J.V. Goerler, M.A. Ali, O. Shchyglo, I. Steinbach, G. Eggeler, and W. Theisen: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4262–73.10.1007/s11661-018-4745-6 ↗
52. R. Xu: Mater. Lett., 2005, vol. 59, pp. 2818–20.10.1016/j.matlet.2005.03.065 ↗
53. Y. Zhou, Z. Zhang, Z. Zhao, and Q. Zhong: J. Mater. Eng. Perform., 2013, vol. 22, pp. 215–22.10.1007/s11665-012-0246-8 ↗
54. Y. Zhang, L. Liu, T. Huang, Q. Yue, D. Sun, J. Zhang, W. Yang, H. Su, and H. Fu: J. Alloys Compd., 2017, vol. 723, pp. 922–29.10.1016/j.jallcom.2017.06.305 ↗
55. I. Lopez-Galilea, S. Huth, W. Theisen, T. Fockenberg, and S. Chakraborty: J. Mater. Sci., 2013, vol. 48, pp. 348–58.10.1007/s10853-012-6752-0 ↗
56. A. Sato, H. Harada, T. Yokokawa, T. Murakumo, Y. Koizumi, T. Kobayashi, and H. Imai: Scr. Mater., 2006, vol. 54, pp. 1679–84.10.1016/j.scriptamat.2006.01.003 ↗
57. C.M.F. Rae, M.S. Hook, and R.C. Reed: Mater. Sci. Eng. A, 2005, vol. 396, pp. 231–39.10.1016/j.msea.2005.01.005 ↗
58. M. Simonetti and P. Caron: Mater. Sci. Eng. A, 1998, vol. 254, pp. 1–2.10.1016/S0921-5093(98)00766-7 ↗