Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion
Source abstract
Abstract
The characterization of Ni-based superalloy Inconel® 718 fabricated by powder-based laser fusion process was performed to study microstructural evolution and accompanying mechanical properties of as-deposited and post-heat-treated material. The current effort employs a low laser volumetric energy density during the deposition. X-ray diffraction, optical, and scanning electron microscopy were done for microstructural characterization. Examination of hardness values, tensile properties, and fractography based on sample orientation was also performed. X-ray diffraction studies facilitated qualitative confirmation of as-deposited samples possessing cube texture. The optical and scanning electron micrographs aided in examining the evolution of microscopic features after each post-processing stage. The as-deposited material possessed columnar grain morphology along with melt-pool marks, which on further magnification showed cellular-dendritic sub-grains along with Laves phases in the interdendritic grain boundaries. Solution heat treatment resulted in reducing these detrimental Laves phases and relief of thermal residual stresses caused by non-homogeneous recrystallization. Solution treatment also led to the formation of equiaxed grain clusters at various sample locations along with the existing columnar grains. The incoherent δ phase was formed at the grain boundaries along with coherent γ″ precipitates. The mechanical properties of as-deposited Inconel 718 alloy were near-isotropic in specimens oriented parallel and perpendicular to the build direction which is ascribed to low laser volumetric energy density. Micrographs of fractured surfaces taken for both directions of all sample conditions showed a ductile mode of fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. E. Herderick: Proc. Mater. Sci. Technol. Conf. Exhib., 2011, vol. 2, pp. 1413–25.
2. K.V. Wong and A. Hernandez: ISRN Mech. Eng., 2012, vol. 2012, pp. 1–10.10.5402/2012/208760 ↗
3. S.A. Khairallah, A.T. Anderson, A. Rubenchik, and W.E. King: Acta Mater., 2016, vol. 108, pp. 36–45.10.1016/j.actamat.2016.02.014 ↗
4. L. Yang, K. Hsu, B. Baughman, D. Godfrey, F. Medina, M. Menon, and S. Wiener: Additive Manufacturing of Metals: The Technology, Materials, Design and Production, 1st ed. Springer, London, 2017, pp. 1–31.
5. S.A.M. Tofail, E.P. Koumoulos, A. Bandyopadhyay, S. Bose, L. O’Donoghue, and C. Charitidis: Mater Today, 2018, vol. 21, pp. 22–37.10.1016/j.mattod.2017.07.001 ↗
6. K. Gruber, W. Stopyra, K. Kobiela, B. Madejski, M. Malicki, and T. Kurzynowski: J. Manuf. Processes, 2022, vol. 73, pp. 642–59.10.1016/j.jmapro.2021.11.053 ↗
7. S.J. Foster, K. Carver, R.B. Dinwiddie, F. List, K.A. Unocic, A. Chaudhary, and S.S. Babu: Metal. Mater. Trans. A, 2018, vol. 49, pp. 5775–98.10.1007/s11661-018-4870-2 ↗
8. D. Tiparti, I. Ho, K.C. Chang, T.H. Hsu, A.C. Yeh, and S. Tin: Metal. Mater. Trans. A, 2021, vol. 52, pp. 2630–41.10.1007/s11661-021-06255-z ↗
9. D.B. Witkin, R.W. Hayes, T.D. McLouth, and G.E. Bean: Metal. Mater. Trans. A, 2019, vol. 50, pp. 3458–65.10.1007/s11661-019-05298-7 ↗
10. X. Wang, X. Gong, and K. Chou: Proc. Inst. Mech. Eng. Part B, 2017, vol. 231, pp. 1890–1903.10.1177/0954405415619883 ↗
11. E. Hosseini and V.A. Popovich: Addit. Manuf., 2019, vol. 30, p. 100877.
12. Y. Zhang, Z. Li, P. Nie, and Y. Wu: Metal. Mater. Trans. A, 2013, vol. 44, pp. 5513–21.
13. E. Chlebus, K. Gruber, B. Kuźnicka, J. Kurzac, and T. Kurzynowski: Mater. Sci. Eng. A, 2015, vol. 639, pp. 647–55.10.1016/j.msea.2015.05.035 ↗
14. N. S. Stoloff: Wrought and P/M Superalloys, ASM Handbook Volume 1 – Properties and Selection: Irons Steels and High-Performance Alloys, 10th ed., ASM International, Materials Park, OH, 1990, pp. 950–77.10.31399/asm.hb.v01.a0001049 ↗
15. R. Komanduri and T.A. Schroeder: J. Eng. Ind., 1986, vol. 108, pp. 93–100.10.1115/1.3187056 ↗
16. D. Deng, J. Moverare, R.L. Peng, and H. Söderberg: Mater. Sci. Eng. A, 2017, vol. 693, pp. 151–63.10.1016/j.msea.2017.03.085 ↗
17. A. Mostafa, I.P. Rubio, V. Brailovski, M. Jahazi, and M. Medraj: Metals, 2017, vol. 7, p. 196.10.3390/met7060196 ↗
18. H. Qi, M. Azer, and A. Ritter: Metal. Mater. Trans. A, 2009, vol. 40, pp. 2410–22.10.1007/s11661-009-9949-3 ↗
19. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, and F. Medina: Acta Mater., 2012, vol. 60, pp. 2229–39.10.1016/j.actamat.2011.12.032 ↗
20. J. J. Schirra, R. H. Caless, and R. W. Hatala: Proc. Int. Symp. Metall. Appl. Superalloys 718, 625 Var. Deriv., TMS, 1991, pp. 375–88.10.7449/1991/Superalloys_1991_375_388 ↗
21. H. Xiao, S. Li, X. Han, J. Mazumder, and L. Song: Mater. Des., 2017, vol. 122, pp. 330–9.10.1016/j.matdes.2017.03.004 ↗
22. S. Gribbin, J. Bicknell, L. Jorgensen, I. Tsukrov, and M. Knezevic: Int. J. Fatigue, 2016, vol. 93, pp. 156–67.10.1016/j.ijfatigue.2016.08.019 ↗
23. L. Hitzler, J. Hirsch, J. Heine, M. Merkel, W. Hall, and A. Öchsner: Materials, 2017, vol. 10, p. 1136.10.3390/ma10101136 ↗
24. N.N. Kumbhar and A.V. Mulay: J. Inst. Eng. Ser. C, 2018, vol. 99, pp. 481–87.10.1007/s40032-016-0340-z ↗
25. Y. Zhai, D.A. Lados, and J.L. LaGoy: JOM, 2014, vol. 66, pp. 808–16.10.1007/s11837-014-0886-2 ↗
26. B.A. Szost, S. Terzi, F. Martina, D. Boisselier, A. Prytuliak, T. Pirling, M. Hofmann, and D.J. Jarvis: Mater. Des., 2016, vol. 89, pp. 559–67.10.1016/j.matdes.2015.09.115 ↗
27. E.W. Hovig, A.S. Azar, F. Grytten, K. Sørby, and E. Andreassen: Adv. Mater. Sci. Eng., 2018, vol. 2018, pp. 1–20.10.1155/2018/7650303 ↗
28. N. Kouraytem, J. Varga, B.A. Ahmadi, H. Mirmohammad, R.A. Chanut, A.D. Spear, and O.T. Kingstedt: Mater. Des., 2021, vol. 198, p. 109228.10.1016/j.matdes.2020.109228 ↗
29. Q. Zhang, P. Ren, X. Tu, Y. Dai, X. Wang, and W. Li: J. Mater. Eng. Perform., 2019, vol. 28, pp. 5376–86.10.1007/s11665-019-04309-3 ↗
30. Z. Zhao, L. Li, W. Yang, Y. Zeng, Y. Lian, and Z. Yue: Int. J. Plast., 2022, vol. 148, p. 103147.10.1016/j.ijplas.2021.103147 ↗
31. G.E. Bean, T.D. McLouth, D.B. Witkin, S.D. Sitzman, P.M. Adams, and R.J. Zaldivar: J. Mater. Eng. Perform., 2019, vol. 28, pp. 1942–49.10.1007/s11665-019-03980-w ↗
32. J. Schneider, B. Lund, and M. Fullen: Addit. Manuf., 2018, vol. 21, pp. 248–54.
33. H. Luo, X.Q. Li, C.L. Pan, P.J. He, and K.L. Zeng: Rare Met., 2021, vol. 40, pp. 3222–34.10.1007/s12598-020-01688-8 ↗
34. V.A. Popovich, E.V. Borisov, A.A. Popovich, V.S. Sufiiarov, D.V. Masaylo, and L. Alzina: Mater. Des., 2017, vol. 114, pp. 441–9.10.1016/j.matdes.2016.10.075 ↗
35. D.H. Smith, J. Bicknell, L. Jorgensen, B.M. Patterson, N.L. Cordes, I. Tsukrov, and M. Knezevic: Mater. Charact., 2016, vol. 113, pp. 1–9.10.1016/j.matchar.2016.01.003 ↗
36. G.P. Dinda, A.K. Dasgupta, and J. Mazumder: Scr. Mater., 2012, vol. 67, pp. 503–06.10.1016/j.scriptamat.2012.06.014 ↗
37. D. Ma, D.D. Stoica, Z. Wang, and A.M. Beese: Mater. Sci. Eng. A, 2017, vol. 684, pp. 47–53.10.1016/j.msea.2016.12.028 ↗
38. J. Strößner, M. Terock, and U. Glatzel: Adv. Eng. Mater., 2015, vol. 17, pp. 1099–1105.10.1002/adem.201500158 ↗
39. V.A. Popovich, E.V. Borisov, A.A. Popovich, V.S. Sufiiarov, D.V. Masaylo, and L. Alzina: Mater. Des., 2017, vol. 131, pp. 12–22.10.1016/j.matdes.2017.05.065 ↗
40. O. Gokcekaya, T. Ishimoto, S. Hibino, J. Yasutomi, T. Narushima, and T. Nakano: Acta Mater., 2021, vol. 212, p. 116876.10.1016/j.actamat.2021.116876 ↗
41. D. J. Tillack, J. M. Manning, and J. R. Hensley. Heat treating of nickel and its alloys. In ASM Handbook Volume 4 - Heat Treating, ASM International, Materials Park, OH, 1991, pp. 907–12.
42. ASM International: ASTM E407–07(2015): Standard Practice for Microetching Metals and Alloys, ASM International, West Conshohocken, PA, 2015.
43. ASTM International: ASTM E8/E8M-16a, Standard Test Methods for Tension Testing of Metallic Materials, West Conshohocken, PA, 2016.
44. W.M. Tucho, P. Cuvillier, A.S. Kverneland, and V. Hansen: Mater. Sci. Eng. A, 2017, vol. 689, pp. 220–32.10.1016/j.msea.2017.02.062 ↗
45. M. Cabrini, S. Lorenzi, T. Pastore, S. Pellegrini, D. Manfredi, P. Fino, S. Biamino, and C. Badini: J. Mater. Process. Technol., 2016, vol. 231, pp. 326–35.10.1016/j.jmatprotec.2015.12.033 ↗
46. Y. Zhong, L.E. Rännar, L. Liu, A. Koptyug, S. Wikman, J. Olsen, D. Cui, and Z. Shen: J. Nucl. Mater., 2017, vol. 486, pp. 234–45.10.1016/j.jnucmat.2016.12.042 ↗
47. J. Fuchs, C. Schneider, and N. Enzinger: Weld. World, 2018, vol. 62, pp. 267–75.10.1007/s40194-017-0537-7 ↗
48. A. Ho, H. Zhao, J.W. Fellowes, F. Martina, A.E. Davis, and P.B. Prangnell: Acta Mater., 2019, vol. 166, pp. 306–23.10.1016/j.actamat.2018.12.038 ↗
49. L. Zhou, A. Mehta, B. McWilliams, K. Cho, and Y. Sohn: J. Mater. Sci. Technol., 2019, vol. 35, pp. 1153–64.10.1016/j.jmst.2018.12.006 ↗
50. G. Marchese, X.G. Colera, F. Calignano, M. Lorusso, S. Biamino, P. Minetola, and D. Manfredi: Adv. Eng. Mater., 2017, vol. 19, p. 1600635.10.1002/adem.201600635 ↗
51. S. Kou: Basic solidification concepts. In Welding metallurgy, 2nd ed., John Wiley & Sons, New Jersey, (2003), pp. 163–66.
52. J.N. DuPont, A.R. Marder, M.R. Notis, and C.V. Robino: Metal. Mater. Trans. A, 1998, vol. 29, pp. 2797–2806.10.1007/s11661-998-0320-x ↗
53. Y. Chen, F. Lu, K. Zhang, P. Nie, S.R.E. Hosseini, K. Feng, and Z. Li: J. Alloys Compd., 2016, vol. 670, pp. 312–21.10.1016/j.jallcom.2016.01.250 ↗
54. N.J. Harrison, I. Todd, and K. Mumtaz: Acta Mater., 2015, vol. 94, pp. 59–68.10.1016/j.actamat.2015.04.035 ↗
55. H. Xiao, P. Xie, M. Cheng, and L. Song: Addit. Manuf., 2020, vol. 34, p. 101278.
56. C.H. Radhakrishna and K.P. Rao: J. Mater. Sci., 1997, vol. 32, pp. 1977–84.10.1023/A:1018541915113 ↗
57. A.N. Jinoop, C.P. Paul, and K.S. Bindra: Proc. Inst. Mech. Eng., 2019, vol. 233, pp. 2376–2400.
58. C.E. Seow, H.E. Coules, G. Wu, R.H.U. Khan, X. Xu, and S. Williams: Mater. Des., 2019, vol. 183, p. 108157.10.1016/j.matdes.2019.108157 ↗
59. M. Cao, D. Zhang, Y. Gao, R. Chen, G. Huang, Z. Feng, R. Poprawe, J.H. Schleifenbaum, and S. Ziegler: Mater. Sci. Eng. A, 2021, vol. 801, p. 140427.10.1016/j.msea.2020.140427 ↗
60. S. Zhang, L. Wang, X. Lin, H. Yang, and W. Huang: Compos. B, 2022, vol. 239, p. 109994.10.1016/j.compositesb.2022.109994 ↗
61. F. Liu, F. Lyu, F. Liu, X. Lin, and C. Huang: J. Mater. Res. Technol., 2020, vol. 9, pp. 9753–65.10.1016/j.jmrt.2020.06.061 ↗
62. J.F. Radavich: Proc. Int. Symp. Metall. Appl. Superalloy, 1989, vol. 718, pp. 229–40.
63. J. Schröder, T. Mishurova, T. Fritsch, I.S. Munoz, A. Evans, M. Sprengel, M. Klaus, C. Genzel, J. Schneider, and G. Bruno: Mater. Sci. Eng. A, 2021, vol. 805, p. 140555.10.1016/j.msea.2020.140555 ↗
64. F. Liu, X. Lin, G. Yang, M. Song, J. Chen, and W. Huang: Opt. Laser Technol., 2011, vol. 43, pp. 208–13.10.1016/j.optlastec.2010.06.015 ↗
65. J. Cao, F. Liu, X. Lin, C. Huang, J. Chen, and W. Huang: Opt. Laser Technol., 2013, vol. 45, pp. 228–35.10.1016/j.optlastec.2012.06.043 ↗
66. Y. Cao, P. Bai, F. Liu, X. Hou, and Y. Guo: Materials, 2020, vol. 13, p. 340.10.3390/ma13020340 ↗
67. M.L. Griffith, M.E. Schlienger, L.D. Harwell, M.S. Oliver, M.D. Baldwin, M.T. Ensz, M. Essien, J. Brooks, C.V. Robino, and J.E. Smugeresky: Mater. Des., 1999, vol. 20, pp. 107–13.10.1016/S0261-3069(99)00016-3 ↗
68. M. Ramakrishna, S. Koppoju, G. Telasang, R. Korla, and G. Padmanabham: Mater Charact., 2021, vol. 172, p. 110868.10.1016/j.matchar.2020.110868 ↗
69. J. Schneider, L. Farris, G. Nolze, S. Reinsch, G. Cios, T. Tokarski, and S. Thompson: J. Manuf. Mater. Process., 2022, vol. 6, pp. 1–20.
70. R.G. Thompson, J.R. Dobbs, and D.E. Mayo: Weld. J., 1986, vol. 65, pp. 299–304.
71. A.O. Basile and J.F. Radavich: Proc. Int. Symp. Metall. Appl. Superalloys, 1991, vol. 718, pp. 325–35.
72. H. Chandler, ed.: Heat Treater’s Guide: Practices and Procedures for Nonferrous Alloys, ASM International, Materials Park, OH, 1996.
73. R.J. Vikram, A. Singh, and S. Suwas: J. Mater. Res., 2020, vol. 35, pp. 1949–62.10.1557/jmr.2020.129 ↗
74. C. Kumara, A.R. Balachandramurthi, S. Goel, F. Hanning, and J. Moverare: Materialia, 2020, vol. 13, p. 100862.10.1016/j.mtla.2020.100862 ↗
75. A. Agnoli, M. Bernacki, R. Logé, J.M. Franchet, J. Laigo, and N. Bozzolo: Metal. Mater. Trans. A, 2015, vol. 46, pp. 4405–21.10.1007/s11661-015-3035-9 ↗
76. P.C. Yadav, S. Sahu, A. Subramaniam, and S. Shekhar: Mater. Sci. Eng. A, 2018, vol. 715, pp. 295–306.10.1016/j.msea.2018.01.007 ↗
77. A. Nicola, G. Fiorucci, J.M. Franchet, J. Cormier, and N. Bozzolo: Acta Mater, 2019, vol. 174, pp. 406–17.10.1016/j.actamat.2019.05.061 ↗
78. D. Zhang, Z. Feng, C. Wang, W. Wang, Z. Liu, and W. Niu: Mater. Sci. Eng., A, 2018, vol. 724, pp. 357–67.10.1016/j.msea.2018.03.073 ↗
79. Y.L. Kuo, S. Horikawa, and K. Kakehi: Mater. Des., 2017, vol. 116, pp. 411–18.10.1016/j.matdes.2016.12.026 ↗
80. D. Gu and Y. Shen: J. Alloys Compd., 2009, vol. 473, pp. 107–15.10.1016/j.jallcom.2008.05.065 ↗
81. S. Sui, J. Chen, X. Ming, S. Zhang, X. Lin, and W. Huang: Int. J. Adv. Manuf. Technol., 2017, vol. 91, pp. 2733–40.10.1007/s00170-016-9901-9 ↗
82. S. Sui, H. Tan, J. Chen, C. Zhong, Z. Li, W. Fan, A. Gasser, and W. Huang: Acta Mater., 2019, vol. 164, pp. 413–27.10.1016/j.actamat.2018.10.032 ↗
83. S. Mahadevan, S. Nalawade, J.B. Singh, A. Verma, B. Paul, and K. Ramaswamy: Proc. Int. Symp. Superalloy, 2010, vol. 718, pp. 737–50.
84. J.M. Oblak, D.F. Paulonis, and D.S. Duvall: Metall. Trans., 1974, vol. 5, pp. 143–53.10.1007/BF02642938 ↗
85. K. Wang, Y. Liu, Z. Sun, J. Lin, Y. Lv, and B. Xu: J. Alloys Compd., 2020, vol. 819, p. 152936.10.1016/j.jallcom.2019.152936 ↗
86. W.M. Tucho and V. Hansen: J. Mater. Sci., 2019, vol. 54, pp. 823–39.10.1007/s10853-018-2851-x ↗
87. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Acta Metall., 1988, vol. 36, pp. 847–64.10.1016/0001-6160(88)90139-3 ↗
88. M. Ni, C. Chen, X. Wang, P. Wang, R. Li, X. Zhang, and K. Zhou: Mater. Sci. Eng. A, 2017, vol. 701, pp. 344–51.10.1016/j.msea.2017.06.098 ↗
89. D. Deng, R.L. Peng, H. Brodin, and J. Moverare: Mater. Sci. Eng. A, 2018, vol. 713, pp. 294–306.10.1016/j.msea.2017.12.043 ↗
90. Y. Zhang, L. Yang, W. Lu, D. Wei, T. Meng, and S. Gao: Mater. Sci. Eng. A, 2020, vol. 771, p. 138580.10.1016/j.msea.2019.138580 ↗
91. F. Caiazzo, V. Alfieri, and G. Casalino: Materials, 2020, vol. 13, p. 538.10.3390/ma13030538 ↗
92. M. Komarasamy, S. Shukla, S. Williams, K. Kandasamy, S. Kelly, and R.S. Mishra: Addit. Manuf., 2019, vol. 28, pp. 661–75.