journal article·2022-08

Temperature-Dependent Microstructural Evolution of Al-Rich Medium-Mn Steel During Intercritical Annealing

Adam Skowronek, Adam Grajcar, Aleksandra Kozłowska, Aleksandra Janik, Mateusz Morawiec, Roumen H. Petrov

Publisher page

Abstract

Medium-Mn automotive sheet steels require optimized heat-treatment processes to obtain benefits caused by strain-induced martensitic transformation of retained austenite (RA) during sheet metal forming or crash events. The intercritical annealing (IA) approach at different temperatures in a range of 640 °C to 800 °C is proposed in the study for a 5Mn hot-rolled medium-Mn sheet steel. The experiments were performed in terms of dilatometry. The analysis of the cooling curves allowed development of a new method for calculating the high-temperature phase equilibrium. The calculations were validated by modeling with JMatPro and experimentally verified by X-ray diffraction (XRD). The microstructure evolution was characterized using light optical microscopy and scanning electron microscopy (SEM), including electron backscatter diffraction (EBSD). The quantitative determination of the fraction, morphology, chemical composition, and stability of the RA was done. Mechanical properties were determined by hardness measurements. The research showed a substantial influence of the IA temperature on the RA fraction and chemical stability and properties of medium-Mn Al-alloyed steel. At temperatures of 680 °C and 700 °C, the largest fraction of over 35 pct of stable RA was obtained, which does not transform to martensite during cooling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. S. Ayenampudi, C. Celada-Casero, J. Sietsma, and M.J. Santofimia: Materialia, 2019, vol. 8, p. 100492.10.1016/j.mtla.2019.100492 ↗
2. A. Skowronek, M. Morawiec, V. Ruiz-Jimenez, C. Garcia-Mateo, and A. Grajcar: Arch. Civ. Mech. Eng., 2020, vol. 20, p. 136.10.1007/s43452-020-00144-9 ↗
3. A. Grajcar, D. Woźniak, and A. Kozłowska: Arch. Metall. Mater., 2016, vol. 61, pp. 811–20.10.1515/amm-2016-0137 ↗
4. Y.-G. Yang, Z.-L. Mi, M. Xu, Q. Xiu, J. Li, and H.-T. Jiang: Mater. Sci. Eng. A, 2018, vol. 725, pp. 389–97.10.1016/j.msea.2018.04.041 ↗
5. J. Han, S.-J. Lee, J.-G. Jung, and Y.-K. Lee: Acta Mater., 2014, vol. 78, pp. 369–77.10.1016/j.actamat.2014.07.005 ↗
6. Q. Lai, M. Gouné, A. Perlade, T. Pardoen, P. Jacques, O. Bouaziz, and Y. Bréchet: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3375–86.10.1007/s11661-016-3547-y ↗
7. R.S. Varanasi, M. Lipińska-Chwałek, J. Mayer, B. Gault, and D. Ponge: Scripta Mater., 2022, vol. 206, p. 114228.10.1016/j.scriptamat.2021.114228 ↗
8. Z. Gronostajski, A. Niechajowicz, and S. Polak: Arch. Civ. Mech. Eng., 2010, vol. 55, pp. 221–30.
9. K. Radwanski, R. Kuziak, and R. Rozmus: Arch. Civ. Mech. Eng., 2019, vol. 19, pp. 453–68.10.1016/j.acme.2018.12.006 ↗
10. K. Kowalczyk, M. Jabłońska, S. Rusz, and G. Junak: Arch. Metall. Mater., 2018, pp. 1957–61.10.24425/amm.2018.125130 ↗
11. Y. Chang, C.Y. Wang, K.M. Zhao, H. Dong, and J.W. Yan: Mater. Des., 2016, vol. 94, pp. 424–32.10.1016/j.matdes.2016.01.048 ↗
12. A. Skowronek and A. Grajcar: Appl. Sci., 2021, vol. 11, p. 9512.10.3390/app11209512 ↗
13. Y.-K. Lee and J. Han: Mater. Sci. Technol., 2015, vol. 31, pp. 843–56.10.1179/1743284714Y.0000000722 ↗
14. Y. Ma, W. Song, S. Zhou, A. Schwedt, and W. Bleck: Metals, 2018, vol. 8, p. 357.10.3390/met8050357 ↗
15. A. Arlazarov, M. Goune, and A. Hazotte: Characterization of Microstructure Formation and Mechanical Behavior of an Advanced Medium Mn Steel, Pittsburgh, PA, 2012, pp. 1124–31.
16. F.G. Caballero, C. GarcíA-Mateo, J. Chao, M.J. Santofimia, C. Capdevila, and C.G. de Andrés: ISIJ Int., 2008, vol. 48, pp. 1256–62.10.2355/isijinternational.48.1256 ↗
17. Y.F. Shen, L.N. Qiu, X. Sun, L. Zuo, P.K. Liaw, and D. Raabe: Mater. Sci. Eng. A, 2015, vol. 636, pp. 551–64.10.1016/j.msea.2015.04.030 ↗
18. D. De Knijf, R. Petrov, C. Föjer, and L.A.I. Kestens: Mater. Sci. Eng. A, 2014, vol. 615, pp. 107–15.10.1016/j.msea.2014.07.054 ↗
19. R. Kuziak, R. Kawalla, and S. Waengler: Arch. Civ. Mech. Eng., 2008, vol. 8, pp. 103–17.10.1016/S1644-9665(12)60197-6 ↗
20. M. Bai, D. Yang, G. Wang, J. Ryu, K. Lee, and H. Yi: Metals, 2020, vol. 10, p. 1432.10.3390/met10111432 ↗
21. X. Hu, J.J. Mueller, X. Sun, E. De Moor, J.G. Speer, D.K. Matlock, and Y. Ren: Front. Mater., 2021, vol. 8, p. 621784.10.3389/fmats.2021.621784 ↗
22. C. Hu, P. Liu, and Y. Liu: Procedia Eng., 2011, vol. 24, pp. 404–11.10.1016/j.proeng.2011.11.2666 ↗
23. F.G. Caballero, C. Garcia-Mateo, and C. Garcia De Andres: Mater. Trans., 2005, vol. 46, pp. 581–86.10.2320/matertrans.46.581 ↗
24. P. Podany, C. Reardon, M. Koukolikova, R. Prochazka, and A. Franc: Metals, 2018, vol. 8, p. 263.10.3390/met8040263 ↗
25. E. De Moor, D.K. Matlock, J.G. Speer, and M.J. Merwin: Scripta Mater., 2011, vol. 64, pp. 185–88.10.1016/j.scriptamat.2010.09.040 ↗
26. D.T. Han, Y.B. Xu, Y. Zou, Z.P. Hu, S.Q. Chen, and Y.M. Yu: Mater. Sci. Forum., 2018, vol. 941, pp. 292–98.10.4028/www.scientific.net/MSF.941.292 ↗
27. L. Král, B. Million, and J. Čermák: Defect Diffus. Forum, 2007, vol. 263, pp. 153–58.10.4028/www.scientific.net/DDF.263.153 ↗
28. Sente Software Ltd.: A Collection of Free Downloadable Papers on the Development and Application of JmatPro, https://www.sentesoftware.co.uk/biblio.html. Accessed 25 March 2020.
29. ASTM A1033-04: “Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations,” ASTM International, West Conshohocken, PA, https://www.astm.org/. Accessed 25 July 2020.
30. H.-S. Yang and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2007, vol. 23, pp. 556–60.10.1179/174328407X176857 ↗
31. J. Zhang, D.-F. Chen, C.-Q. Zhang, W.-S. Hwang, and M.-R. Han: Mater. Res., 2015, vol. 30, pp. 2081–89.10.1557/jmr.2015.173 ↗
32. N. van Dijk, A. Butt, L. Zhao, J. Sietsma, S. Offerman, J. Wright, and S. Zwaag: Acta Mater., 2005, vol. 53, pp. 5439–47.10.1016/j.actamat.2005.08.017 ↗
33. K. Radwański: Arch. Civ. Mech. Eng., 2016, vol. 16, pp. 282–93.10.1016/j.acme.2015.12.001 ↗
34. S.I. Wright and M.M. Nowell: Microsc. Microanal., 2006, vol. 12, pp. 72–84.10.1017/S1431927606060090 ↗
35. J. Trzaska: Arch. Metall. Mater., 2015, vol. 60, pp. 181–85.10.1515/amm-2015-0029 ↗
36. L. De Carvalho, M. Andrade, R. Lesley, F. Souza, and A. Padilha: Mater. Res., 2013, vol. 16, pp. 740–44.10.1590/S1516-14392013005000069 ↗
37. D. Fonseca, A. Feitosa, M. Feitosa, L. De Carvalho, R. Lesley, and A. Padilha: Mater. Res., 2021, vol. 24, p. 20200470.10.1590/1980-5373-mr-2020-0470 ↗
38. H. Xu, W. Cao, H. Dong, and J. Li: ISIJ Int., 2015, vol. 55, pp. 662–69.10.2355/isijinternational.55.662 ↗
39. J. Hidalgo, C. Celada-Casero, and M.J. Santofimia: Mater. Sci. Eng. A, 2019, vol. 754, pp. 766–77.10.1016/j.msea.2019.03.055 ↗
40. A. Navarro-López, J. Sietsma, and M.J. Santofimia: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1028–39.10.1007/s11661-015-3285-6 ↗
41. H. Talebi, M. Jahazi, and H. Melkonyan: Materials, 2018, vol. 11, p. 1441.10.3390/ma11081441 ↗
42. M. Onsøien, M. M’Hamdi, and A. Mo: Weld. J., 2009, vol. 88, pp. 1S-6S.
43. F.G. Caballero, C. Capdevila, and C.G.D. Andrés: ISIJ Int., 2001, vol. 41, pp. 1093–1102.10.2355/isijinternational.41.1093 ↗
44. S. Kobayashi, and H. Fukunishi: ISIJ Int. 2020, vol. 60, pp. 2983–89.10.2355/isijinternational.ISIJINT-2020-205 ↗
45. A. Arlazarov, M. Goune, O. Bouaziz, A. Hazotte, and F. Kegel: Materials Science Forum, Trans Tech Publications, Quebec City, 2011, pp. 706–09.
46. K. Sugimoto, N. Usui, M. Kobayashi, and S. Hashimoto: ISIJ Int., 1992, vol. 32, pp. 1311–18.10.2355/isijinternational.32.1311 ↗
47. H. Tanino, M. Horita, and K.-I. Sugimoto: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2073–80.10.1007/s11661-016-3376-z ↗
48. J.J. Mueller, X. Hu, X. Sun, Y. Ren, K. Choi, E. Barker, J.G. Speer, D. Matlock, and E. De Moor: Mater. Des., 2021, vol. 203, p. 109598.10.1016/j.matdes.2021.109598 ↗
49. J. Burja, B. Šuler, M. Češnjaj, and A. Nagode: Metals, 2021, vol. 11, p. 392.10.3390/met11030392 ↗
50. H. Roumen, S. Juri, and A. Leo, eds.: in Encyclopedia of Iron, Steel, and Their Alloys, CRC Press, Boca Raton, 2016.
51. B. Hu and H. Luo: Metals, 2017, vol. 7, p. 464.10.3390/met7110464 ↗
52. R. Schneider, K. Steineder, D. Krizan, and C. Sommitsch: Mater. Sci. Technol., 2019, vol. 35, pp. 2045–53.10.1080/02670836.2018.1548957 ↗
53. J. Wu, P.J. Wray, C.I. Garcia, M. Hua, and A.J. Deardo: ISIJ Int., 2005, vol. 45, pp. 254–62.10.2355/isijinternational.45.254 ↗
54. M.J. Santofimia, R.H. Petrov, L. Zhao, and J. Sietsma: Mater. Charact., 2014, vol. 92, pp. 91–95.10.1016/j.matchar.2014.03.003 ↗
55. K. Verbeken, L. Barbé, and D. Raabe: ISIJ Int., 2009, vol. 49, pp. 1601–09.10.2355/isijinternational.49.1601 ↗
56. S. Zajac, V. Schwinn, and K.-H. Tacke: Mater. Sci. Forum., 2005, vol. 500–501, pp. 387–94.10.4028/www.scientific.net/MSF.500-501.387 ↗
57. A. Kaijalainen, M. Liimatainen, V. Kesti, J. Heikkala, T. Liimatainen, and D. Porter: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 4175–88.10.1007/s11661-016-3574-8 ↗