journal article·2022-03

An Investigation into Sinterability Improvements of 316L Binder Jet Printed Parts

Rasim Batmaz, Ali Zardoshtian, Trevor D. Sabiston, Reza Tangestani, Apratim Chakraborty, Nicholas Krutz, Srinivas Pendurti, Arunkumar Natarajan, Etienne Martin

Publisher page

Abstract

Metal binder jet additive manufacturing (BJAM) process is catching the automotive, aerospace and medical industry’s attention as it is fast, economical, and enables fabrication of complex geometries. While other conventional powder metallurgy (PM) processes like hot isostatic pressing (HIP) and metal injection molding (MIM) already have well-defined pre- and post- process parameters, they still need to be established for BJAM. This paper evaluates the effect of particle size distribution (PSD) and green state density on the sintering of 316L powders using the master sintering curve (MSC) concept. Three powders with different PSDs are used to manufacture test coupons produced with similar green densities for handmade samples and differing green densities using BJAM. The MSC results show the effect of the PSD and green densities on the sintering behavior of the powders. A powder with a bimodal distribution of particle size is shown to have the best sintering characteristics for BJAM by allowing higher initial packing density.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Injection Molding Process and Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. D.Y. Park, S.W. Lee, S.J. Park, Y.S. Kwon, and I. Otsuka: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2013, vol. 44, pp. 1508–18.10.1007/s11661-012-1477-x ↗
2. M. Seerane, P. Ndlangamandla, and R. Machaka: J. South. African Inst. Min. Metall., 2016, vol. 116, pp. 935–40.10.17159/2411-9717/2016/v116n10a7 ↗
3. Ö. Özgün, H. ÖzkanGülsoy, R. Yilmaz, and F. Findik: J. Alloys Compd., 2012, https://doi.org/10.1016/j.jallcom.2012.08.069.10.1016/j.jallcom.2012.08.069 ↗
4. Z.Y. Liu, T.B. Sercombe, and G.B. Schaffer: Powder Metall., 2008, vol. 51, pp. 78–83.10.1179/174329008X284859 ↗
5. D.F. Heaney: Handbook of Metal Injection Molding, Woodhead Publishing, Sawston, 2018.
6. B. Utela, D. Storti, R. Anderson, and M. Ganter: J. Manuf. Process., 2008, vol. 10, pp. 96–104.10.1016/j.jmapro.2009.03.002 ↗
7. R.M. German: Powder Metallurgy and Particulate Materials Processing: The Processes, Materials, Products, Properties and Applications, Metal powder industries federation Princeton, 2005.
8. M. Ziaee and N.B. Crane: Addit. Manuf., 2019, vol. 28, pp. 781–801.
9. R.L. Coble: J. Am. Ceram. Soc., 1973, vol. 56, pp. 461–6.10.1111/j.1151-2916.1973.tb12524.x ↗
10. E.M. Sachs, J.S. Haggerty, M.J. Cima, P.A. Williams (1993).
11. Y. Bai, G. Wagner, and C.B. Williams: J. Manuf. Sci. Eng., 2017, vol. 139, p. 81019.10.1115/1.4036640 ↗
12. A. Mostafaei, P. Rodriguez De Vecchis, I. Nettleship, and M. Chmielus: Mater. Des., 2018, https://doi.org/10.1016/j.matdes.2018.11.051.10.1016/j.matdes.2018.11.051 ↗
13. X. Lv, F. Ye, L. Cheng, S. Fan, and Y. Liu: Ceram. Int., 2019, vol. 45, pp. 12609–24.10.1016/j.ceramint.2019.04.012 ↗
14. V. Esnault, A. Michrafy, D. Heitzmann, M. Michrafy, and D. Oulahna: Powder Technol., 2015, vol. 270, pp. 484–9.10.1016/j.powtec.2014.07.046 ↗
15. Y. Bai and C.B. Williams: Rapid Prototyp. J., 2015, vol. 21, pp. 177–85.10.1108/RPJ-12-2014-0180 ↗
16. S. Mirzababaei and S. Pasebani: J. Manuf. Mater. Process., 2019, vol. 3, p. 82.
17. R.M. German: Metall. Trans. A., 1992, vol. 23, pp. 1455–65.10.1007/BF02647329 ↗
18. W. Du, J. Roa, J. Hong, Y. Liu, Z. Pei, and C. Ma: J. Manuf. Sci. Eng., 2021, vol. 143, pp. 1–26.
19. Y. Bai, G. Wagner, and C.B. Williams: Solid Free. Fabr. Proc., 2015, vol. 2015, pp. 758–71.
20. J.D. Hansen, R.P. Rusin, M.H. Teng, D.L. Johnson (1992).
21. D.L. Johnson and H. Su: Adv. Powder Metall. Part. Mater., 1997, vol. 2, p. 14.
22. H. Su and D.L. Johnson: J. Am. Ceram. Soc., 1996, vol. 79, pp. 3211–7.10.1111/j.1151-2916.1996.tb08097.x ↗
23. D.C. Blaine, J.D. Gurosik, S.J. Park, R.M. German, and D.F. Heaney: Metall. Mater. Trans. A., 2006, vol. 37, pp. 715–20.10.1007/s11661-006-0043-9 ↗
24. M.-H. Teng, Y.-C. Lai, and Y.-T. Chen: West. Pacific Earth Sci., 2002, vol. 2, pp. 171–80.
25. Y.-S. Lee, S.-J. Lee, S. Lee, E.-Z. Kim, and D.J. Yoon: Adv. Mater. Sci. Eng., 2005, vol. 48, p. 129.
26. T.-Y. Chan, M.-S. Chuang, and S.-T. Lin: Powder Metall., 2005, vol. 48, pp. 129–33.10.1179/003258905X37710 ↗
27. L. Moballegh, J. Morshedian, and M. Esfandeh: Mater. Lett., 2005, vol. 59, pp. 2832–7.10.1016/j.matlet.2005.04.027 ↗
28. M.J. Donachie and S.J. Donachie: Superalloys A Technical Guide, ASM International, Materials Park, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
29. A. Mostafaei, A.M. Elliott, J.E. Barnes, F. Li, W. Tan, C.L. Cramer, P. Nandwana, and M. Chmielus: Prog. Mater. Sci., 2020, vol. 119, p. 100707.10.1016/j.pmatsci.2020.100707 ↗
30. G.K. Meenashisundaram, Z. Xu, M.L.S. Nai, S. Lu, J.S. Ten, and J. Wei: Materials (Basel)., 2020, vol. 13, p. 3744.10.3390/ma13173744 ↗
31. A.S. for T. and M.C.B. on M.P. and M.P. Products: Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle, ASTM International, 2009.
32. R. Defay, I. Prigogine: Desser, Liege, Belgium.
33. E. Martin, A. Natarajan, S. Kottilingam, and R. Batmaz: Addit. Manuf., 2021, vol. 39, p. 101894.
34. B. Verlee, T. Dormal, and J. Lecomte-Beckers: Powder Metall., 2012, vol. 55, pp. 260–7.10.1179/0032589912Z.00000000082 ↗
35. R. German: Sintering: From Empirical Observations to Scientific Principles, Butterworth-Heinemann, Oxford, 2014.
36. F. Ya: SCI. Sinter Sci. Sinter., 1980, vol. 12, p. 7.
37. G.C. Kuczynski: Sintering Key Papers, Springer, Berlin, 1990, pp. 509–27.10.1007/978-94-009-0741-6_33 ↗
38. Z.Y. Liu, N.H. Loh, K.A. Khor, and S.B. Tor: Scr. Mater., 2001, vol. 44, pp. 1131–7.10.1016/S1359-6462(01)00664-9 ↗
39. V. Ganesan, V. Seetharaman, and V.S. Raghunathan: J. Nucl. Mater., 1983, vol. 118, pp. 313–9.10.1016/0022-3115(83)90239-8 ↗
40. M. Mizouchi, Y. Yamazaki, Y. Iijima, and K. Arioka: Mater. Trans., 2004, vol. 45, pp. 2945–50.10.2320/matertrans.45.2945 ↗
41. P.E. Evans and D.W. Ashall: Int. J. Powder Met., 1965, vol. 1, p. 32.