journal article·2021-05

Microstructure and Magnetic Properties of 6.5 Wt Pct Si Steel Strip Produced by Simulated Strip Casting Process

Wanlin Wang, Hairui Qian, Dawei Cai, Lejun Zhou, Song Mao, Peisheng Lyu

Publisher page

Abstract

An improved dip test apparatus was used to simulate the strip casting of 6.5 wt pct Si steel in this study. The results showed that the interfacial heat flux between melt and substrate could reach maximum value of 8.2 MW/m2, with > 4350 kJ/m2 heat being removed in the first 1.0 s. The as-cast strip mainly consisted of large columnar grains hundreds of microns in length. The high cooling rate of the as-cast strip suppressed the formation of ordered phases and the precipitation of elements. Only several complex particles of MnS-TiN of a few nanometers were found. After annealing at 1273 K (1000 °C) for 30 minutes, a large number of small particles such as TiN precipitated from the ferrite matrix. Within the testing frequency and magnetic field strength, the three strip samples obtained at different conditions showed the lowest iron loss at the frequency of 20 kHz and the magnetic field strength of 0.07 T, which were 22, 18 and 17 W/kg, respectively. The coercive force and iron loss decreased with increasing heat treatment temperature, while the magnetic permeability showed the opposite pattern. The magnetic permeability and iron loss of the silicon steel strip produced by strip casting are comparable to those of the silicon steel products produced by other techniques such as melt spinning and conventional rolling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. [1] M. Takashima, M. Komatsubara and N. Morito: ISIJ Int., 1997, vol. 37, pp. 1263-68.10.2355/isijinternational.37.1263 ↗
2. [2] Z. S. Xia, Y. L. Kang and Q. L. Wang: J. Magn. Magn. Mater., 2008, vol. 320, pp. 3229-33.10.1016/j.jmmm.2008.07.003 ↗
3. [3] N. Takahashi, Y. Suga and H. Kobayashi: J. Magn. Magn. Mater.,1996, vol. 160, pp. 98–101.10.1016/0304-8853(96)00126-6 ↗
4. [4] I. Tanaka and H. Yashiki: IEEE Trans. Magn.,2010, vol. 46, pp. 290–93.10.1109/TMAG.2009.2033457 ↗
5. [5] P. G. Q. Netto, R. P. Tavares, M. Isac and R. I. L. Guthrie: ISIJ Int., 2007, vol. 41, pp. 1340-49.10.2355/isijinternational.41.1340 ↗
6. [6] E. E. M. Luiten, K. Blok: Energy Policy, 2003, vol. 31, pp. 1339-56.10.1016/S0301-4215(02)00194-5 ↗
7. C. Q. Wang, Y. Y, Y. Fang, T. J. Li (2005) J. Iron Steel Res. vol. 17, pp. 11-15.
8. [8] S. Ge, M. Isac and R. I. L. Guthrie: ISIJ Int., 2012 vol. 52, pp. 2109-22.10.2355/isijinternational.52.2109 ↗
9. [9] N. Zapuskalov: ISIJ Int., 2003, vol. 43, pp. 1115-27.10.2355/isijinternational.43.1115 ↗
10. [10] S. Ge, M. Isac and R. I. L. Guthrie: ISIJ Int., 2013, vol. 53, pp. 729-42.10.2355/isijinternational.53.729 ↗
11. [11] R. Wechsler: Scand. J. Metall. vol., 2003, 32, pp. 58-63.10.1034/j.1600-0692.2003.00636.x ↗
12. [12] J.Y. Park, K.H. Oh and H.Y. Ra: Scr. Mater., 1999, vol. 40, pp. 881-85.10.1016/S1359-6462(99)00044-5 ↗
13. [13] H. Honma, Y. Ushigami and Y. Suga: J. Appl. Phys., 1991, vol. 70, pp: 6259-61.10.1063/1.349985 ↗
14. [14] Y. Q. Wang, X. M. Zhang, Z. He, G. Q. Zu, G. F. Ji, J. Y. Duan and R. D. K. Misra: Mater. Sci. Eng. A, 2017, vol. 703, pp. 340-47.10.1016/j.msea.2017.07.075 ↗
15. [15] W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans. Tech. Publications, Lausanne, 1998.10.4028/www.scientific.net/RC.35 ↗
16. [16] P. Nolli and A. W. Cramb: Iron Steel Technol., 2006, vol. 3, pp. 169-78.
17. [17] P. Nolli and A. W. Cramb: Metall. Mater. Trans. B, 2008, vol. 39, pp. 56-65.10.1007/s11663-007-9116-4 ↗
18. [18] P. Nolli and A. W. Cramb: ISIJ Int., 2007, vol. 47, pp. 1284-93.10.2355/isijinternational.47.1284 ↗
19. [19] C. Y. Zhu, W. L. Wang and C. Lu: J. Alloys Compd., 2019, vol. 770, pp. 631-39.10.1016/j.jallcom.2018.08.153 ↗
20. [20] W. L. Wang, C. Y. Zhu, C. Lu, J. Yu and L. J. Zhou: Metall. Mater. Trans. A, 2018, vol. 49, pp. 5524-34.10.1007/s11661-018-4850-6 ↗
21. [21] C. Lu, W. L. Wang, J. Zeng, C. Y. Zhu and J. Chang: Metall. Mater. Trans. B, 2019, vol. 50, pp. 77-85.10.1007/s11663-018-1449-7 ↗
22. [22] C. Y. Zhu, W. L. Wang, J. Zeng, C. Lu, L. J. Zhou and J. Chang: ISIJ Int., 2019, vol. 59, pp. 880-88.10.2355/isijinternational.ISIJINT-2018-747 ↗
23. [23] L. Strezov and J. Herbertson: ISIJ Int., 1998, vol. 38, pp. 959-66.10.2355/isijinternational.38.959 ↗
24. [24] L. Strezov, J. Herbertson and G. R. Belton: Metall. Mater. Trans. B, 2000, vol. 31, pp. 1023-30.10.1007/s11663-000-0078-z ↗
25. [25] P. S. Lyu, W. L. Wang, H. R. Qian, J. C. Wu and Y. Fang: JOM, 2020, vol.72, pp. 1910-19.10.1007/s11837-020-04049-z ↗
26. [26] K. Jenkins and M. Lindenmo: J. Magn. Magn. Mater., 2008, vol.320, pp. 2423-29.10.1016/j.jmmm.2008.03.062 ↗
27. [27] K. Iwayama and T. Haratani: J. Magn. Magn. Mater.,1980, vol.19, pp. 15–17.10.1016/0304-8853(80)90540-5 ↗
28. [28] S. Mishra and V. Kumar: Mater. Sci. Eng. B, 1995, vol. 32., pp. 177-84.10.1016/0921-5107(95)80024-7 ↗
29. Y. Wan, K. K. Feng, Q. Q. Zhao, Y. C. Wu, D. D. Fan, Y. J. Xia, J. Li and Y. H. Wen: Mater. Res. Express, 2019, vol. 6, pp. 1165.10.1088/2053-1591/ab3c9e ↗
30. [30] Y. Wan, W. Chen and Q. Zhao: ISIJ Int.,2016, vol. 56, pp. 661-68.10.2355/isijinternational.ISIJINT-2015-498 ↗
31. [31] X. Lu, F. Fang, Y. X. Zhang, Y. Wang, G. Yuan, Y. B. Xu, G. M. Cao, R. D. K. Misra and G. D. Wang: Mater. Charact., 2017, vol. 126, pp. 125-34.10.1016/j.matchar.2017.02.022 ↗
32. [32] Y. B. Xu, H. T. Jiao, Y. X. Zhang, F. Fang, X. Lu, Y. Wang, G. M. Cao, C. G. Li and R. D. K. Misra: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1465-74.10.1016/j.jmst.2017.08.002 ↗
33. [33] T. Dorin, K. Wood, A. Taylor, P. Hodgson and N. Stanford: Acta Mater., 2016, vol. 115, pp. 167-77.10.1016/j.actamat.2016.05.043 ↗
34. [34] T. Dorin, K. Wood, A. Taylor, P. Hodgson and N. Stanford: Mater. Charact., 2016, vol. 112, pp. 259-68.10.1016/j.matchar.2015.12.028 ↗
35. [35] Z. P. Xiong, A. A. Saleh, A. G. Kostryzhev and E. V. Pereloma: J. Alloys Compd., 2017, vol. 721, pp. 291-06.10.1016/j.jallcom.2017.06.050 ↗
36. [36] Z. P. Xiong, A. G. Kostryzhev, A. A. Saleh, L. Chen and E. V. Pereloma: Mater. Sci. Eng. A, 2016, vol. 664, pp. 26-42.10.1016/j.msea.2016.03.106 ↗
37. [37] Z. P. Xiong, A. G. Kostryzhev, L. Chen and E. V. Pereloma: Mater. Sci. Eng. A, 2016, vol. 677, pp. 356-66.10.1016/j.msea.2016.09.055 ↗
38. [38] Z. P. Xiong, A. G. Kostryzhev, N. E. Stanford and E. V. Pereloma: Mater. Des., 2015, vol. 88, pp. 537-49.10.1016/j.matdes.2015.09.031 ↗
39. [39] Z. P. Xiong, A. G. Kostryzhev, N. E. Stanford, E. V. Pereloma: Mater. Sci. Eng. A, 2016, vol. 651, pp. 291-05.10.1016/j.msea.2015.10.120 ↗
40. [40] Z. P. Xiong, A. A. Saleh, R. K. W. Marceau, A. S. Taylor, E. V. Pereloma, N. E. Stanford, A. G. Kostryzhev and E. V. Pereloma: Acta Mater., 2017, vol. 134, pp. 1-15.10.1016/j.actamat.2017.05.060 ↗
41. [41] P. S. Lyu, W. L. Wang and H. H. Zhang: Metall. Mater. Trans. B, 2017, vol. 48, pp. 247-59.10.1007/s11663-016-0853-0 ↗
42. [42] P. S. Lyu, W. L. Wang, X. K. Long, K. X. Zhang, E. Z. Gao and R. S. Qin, Metall. Mater. Trans. B, 2018, vol. 49. pp. 78-88.10.1007/s11663-017-1154-y ↗
43. [43] J.V. Beck and K.A. Woodbury: Meas. Sci. Technol., 1998, vol. 9, pp. 839-47.10.1088/0957-0233/9/6/001 ↗
44. [44] J.V. Beck, B. Litkouhi and C.S. St. Clair: Numer. Heat Transfer A, 1982, vol. 5, pp. 275-86.
45. [45] H. H. Zhang, W. L. Wang, D. Zhou, F. J. Ma, B. X. Lu and L. J. Zhou: Metall. Mater. Trans. B, 2014, vol. 45, pp. 1038-47.10.1007/s11663-013-9967-9 ↗
46. [46] D. Zhou, W. L. Wang, H. H. Zhang, F. J. Ma, K. Chen and L. J. Zhou: Metall. Mater. Trans. B, 2014, vol. 45, pp. 1048-56.10.1007/s11663-014-0058-3 ↗
47. [47] M. Ferry: Direct Strip Casting of Metals and Alloys, Woodhead Publishing, Cambridge, 2006.10.1201/9781439824214 ↗
48. [48] O. Kubaschewski: Iron Binary Phase Diagram, Springer, Berlin, 1982.
49. [49] T. Dorin, A. Taylor, K. Wood, J. Wang, P. Hodgson and N. Stanford: J. Appl. Crystallogr., 2016, vol. 49, pp. 1777-85.10.1107/S1600576716013054 ↗
50. [50] T. Dorin, N. Stanford, A. Taylor and P. Hodgson: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5561-71.10.1007/s11661-015-3173-0 ↗
51. [51] K. Oikawa, H. Ohtani, K. Ishida and T. Nishizawa: ISIJ Int., 1995, vol. 35, pp. 402-08.10.2355/isijinternational.35.402 ↗
52. [52] S. Wang, Y. F. Liang, B. Chen, F. Ye and J. P. Lin: Metals, 2018, vol. 8, pp. 259.10.3390/met8040259 ↗
53. [53] Y. F. Liang, F. Ye, J. P. Lin, Y. L. Wang and G. L. Chen: J. Alloys Compd., 2010, vol. 491, 268-70.10.1016/j.jallcom.2009.10.118 ↗
54. A. H. Kasama, C. Bolfarini, C. S. Kiminami, W. J. B. Filho, Magnetic properties evaluation of spray formed and rolled Fe–65 wtpct Si–10 wtpct Al alloy, Mater. Sci. Eng. A, 2007, vol. 449, pp. 375-77.10.1016/j.msea.2006.02.318 ↗
55. [55] H. Haiji, K. Okada, T. Hiratani, M. Abe and M. Ninomiya: J. Magn. Magn. Mater.,1996, vol. 160, pp. 109-14.10.1016/0304-8853(96)00128-X ↗