Interrogating the Effects of Hydrogen on the Behavior of Planar Deformation Bands in Austenitic Stainless Steel
Source abstract
Abstract
Abstract The effects of internal hydrogen on the deformation microstructures of 304L austenitic stainless steel have been characterized using electron backscattered diffraction (EBSD), transmission Kikuchi diffraction (TKD), high-resolution scanning transmission electron microscopy (HRSTEM), and nanoprobe diffraction. Samples, both thermally precharged with hydrogen and without thermal precharging, were subjected to tensile deformation of 5 and 20 pct true strain followed by multiple microscopic interrogations. Internal hydrogen produced widespread stacking faults within the as-forged initially unstrained material. While planar deformation bands developed with tensile strain in both the hydrogen-precharged and non-precharged material, the character of these bands changed with the presence of internal hydrogen. As shown by nanobeam diffraction and HRSTEM observations, in the absence of internal hydrogen, the bands were predominantly composed of twins, whereas for samples deformed in the presence of internal hydrogen,ε-martensite became more pronounced and the density of deformation bands increased. For the 20 pct strain condition,α′-martensite was observed at the intersection ofε-martensite bands in hydrogen-precharged samples, whereas in non-precharged samplesα′-martensite was only observed along grain boundaries. We hypothesize that the increased prevalence ofα′-martensite is a secondary effect of increasedε-martensite and deformation band density due to internal hydrogen and is not a signature of internal hydrogen itself.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. V. Gerold, H. Karnthaler, Acta Metallurgica, 1989, vol. 37, pp. 2177-2183.10.1016/0001-6160(89)90143-0 ↗
2. T.C. Pekin, C. Gammer, J. Ciston, C. Ophus, A.M. Minor, Scripta Materialia, 2018, vol. 146, pp. 87-90.10.1016/j.scriptamat.2017.11.005 ↗
3. S. Barannikova, M.V. Nadezhkin, V. Melnichuk, L. Zuev, Techn. Phys. Lett., 2011, vol. 37, p. 793.
4. H.K. Birnbaum, P. Sofronis, Materials Science and Engineering: A, 1994, vol. 176, pp. 191-202.10.1016/0921-5093(94)90975-X ↗
5. D. Ulmer, C. Altstetter, Acta Metallurgica et Materialia, 1991, vol. 39, pp. 1237-1248.10.1016/0956-7151(91)90211-I ↗
6. H. Jackson, C. SanMarchi, D. Balch, B. Somerday, J. Michael, Metallurgical and Materials Transactions A, 2016, vol. 47, pp. 4334-4350.10.1007/s11661-016-3563-y ↗
7. J. Talonen, H. Hänninen, Acta materialia, 2007, vol. 55, pp. 6108-6118.10.1016/j.actamat.2007.07.015 ↗
8. J.W. Christian, S. Mahajan, Progress in materials science, 1995, vol. 39, pp. 1-157.10.1016/0079-6425(94)00007-7 ↗
9. S. Mahajan, M. Green, D. Brasen, Metallurgical Transactions A, 1977, vol. 8, pp. 283-293.10.1007/BF02661642 ↗
10. P.L. Mangonon, G. Thomas, Metallurgical transactions, 1970, vol. 1, pp. 1577-1586.10.1007/BF02642003 ↗
11. L. Bracke, L. Kestens, J. Penning, Scripta materialia, 2007, vol. 57, pp. 385-388.10.1016/j.scriptamat.2007.05.003 ↗
12. J. Dash, H. Otte, Acta Metallurgica, 1963, vol. 11, pp. 1169-1178.10.1016/0001-6160(63)90044-0 ↗
13. C. Huang, G. Yang, Y. Gao, S. Wu, S. Li, Journal of materials research, 2007, vol. 22, pp. 724-729.10.1557/jmr.2007.0094 ↗
14. W. Pitsch, Philosophical Magazine, 1959, vol. 4, pp. 577-584.10.1080/14786435908238253 ↗
15. Y. Shen, X. Li, X. Sun, Y. Wang, L. Zuo, Materials Science and Engineering: A, 2012, vol. 552, pp. 514-522.10.1016/j.msea.2012.05.080 ↗
16. X.-S. Yang, S. Sun, T.-Y. Zhang, Acta Materialia, 2015, vol. 95, pp. 264-273.10.1016/j.actamat.2015.05.034 ↗
17. G. Olson, M. Cohen, Journal of the Less Common Metals, 1972, vol. 28, pp. 107-118.10.1016/0022-5088(72)90173-7 ↗
18. G. Olson, M. Cohen, Metallurgical transactions A, 1975, vol. 6, p. 791.10.1007/BF02672301 ↗
19. G. Olson, M. Cohen, Metallurgical transactions A, 1976, vol. 7, pp. 1905-1914.
20. G. Olson, M. Cohen, Metallurgical Transactions A, 1976, vol. 7, pp. 1897-1904.
21. M.L. Martin, M. Dadfarnia, A. Nagao, S. Wang, P. Sofronis, Acta Materialia, 2018, 165, pp. 734-750.10.1016/j.actamat.2018.12.014 ↗
22. H. Fukumoto, H. Kobayashi, S. Oshima, K. Kawamata, Pressure Vessels and Piping Conference, 2017, vol. 58004, p. V06BT06A033.
23. Y. Murakami, The effect of hydrogen on fatigue properties of metals used for fuel cell system, Advances in Fracture Research. Springer, New York, 2006, pp. 167–195.
24. R.B. Sills, W. Cai, Philosophical Magazine, 2018, vol. 98, pp. 1491-1510.10.1080/14786435.2018.1441560 ↗
25. M. Hatano, M. Fujinami, K. Arai, H. Fujii, M. Nagumo, Acta materialia, 2014, vol. 67, pp. 342-353.10.1016/j.actamat.2013.12.039 ↗
26. C. SanMarchi, B.P. Somerday, S.L. Robinson, International Journal of Hydrogen Energy, 2007, vol. 32, pp. 100-116.10.1016/j.ijhydene.2006.05.008 ↗
27. A. Inoue, Trans. ISIJ, 1979, vol. 19, pp. 170-178.10.2355/isijinternational1966.19.170 ↗
28. M. Holzworth, M. Louthan Jr, Corrosion, 1968, vol. 24, pp. 110-124.10.5006/0010-9312-24.4.110 ↗
29. D. Eliezer, D. Chakrapani, C. Altstetter, E. Pugh, Metallurgical Transactions A, 1979, vol. 10, pp. 935-941.10.1007/BF02658313 ↗
30. N. Narita, C. Altstetter, H. Birnbaum, Metallurgical Transactions A, 1982, vol. 13, pp. 1355-1365.10.1007/BF02642872 ↗
31. P. Rozenak, A. Loew, Corrosion Science, 2008, vol. 50, pp. 3021-3030.10.1016/j.corsci.2008.08.045 ↗
32. P. Rozenak, L. Zevin, D. Eliezer, Journal of materials science, 1984, vol. 19, pp. 567-573.10.1007/BF02403244 ↗
33. J. Lee, C. Park, H. Park, N. Kang, Int. J. Hydrogen Energy, 2020, pp. 10227–32.10.1016/j.ijhydene.2020.02.012 ↗
34. P. Maulik, J. Burke, Scripta metallurgica, 1975, vol. 9, pp. 17-22.10.1016/0036-9748(75)90139-8 ↗
35. J. Hermida, A. Roviglione, Scripta materialia, 1998, vol. 39, pp. 1145-1149.10.1016/S1359-6462(98)00285-1 ↗
36. D. An, W. Krieger, S. Zaefferer, International Journal of Plasticity, 2020, vol. 126, p. 102625.10.1016/j.ijplas.2019.11.004 ↗
37. C. San Marchi, K. Nibur, D. Balch, B. Somerday, X. Tang, G. Schiroky, T. Michler, Effects of Hydrogen on Materials, Proceedings of the 2008 International Hydrogen Conference (Moran WY, 2008), ASM International, Materials Park OH, 2009, pp. 88–96.
38. C. San Marchi, N. Yang, T. Headley, J. Michael, 18th European Conference on Fracture (ECF18), vol. 30. Dresden, Germany, 2010
39. AMS F Corrosion Heat Resistant Alloys Committee, Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings (STABILIZED Mar 2015), AMSQQS763D, SAE International, 2015, p. 22.
40. J. Gaggero, D. Hull, Acta Metallurgica, 1962, vol. 10, pp. 995-998.10.1016/0001-6160(62)90165-7 ↗
41. H. Warlimont, Transactions of the Metallurgical Society of AIME, 1961, vol. 221, pp. 1270-1271.
42. D. Peckner, I.M. Bernstein, D. Peckner, Handbook of stainless steels, McGraw-Hill, New York, 1977.
43. T. Angel, J. Iron Steel Inst., 1954, vol. 177, pp. 165-174.
44. P. Phillips, M. Brandes, M. Mills, M. De Graef, Ultramicroscopy, 2011, vol. 111, pp. 1483-1487.10.1016/j.ultramic.2011.07.001 ↗
45. P. Phillips, M. Mills, M. De Graef, Philosophical Magazine, 2011, vol. 91, pp. 2081-2101.10.1080/14786435.2010.547526 ↗
46. W. Burgers, Physica, 1934, vol. 1, pp. 561-586.10.1016/S0031-8914(34)80244-3 ↗
47. X.-S. Yang, S. Sun, X.-L. Wu, E. Ma, T.-Y. Zhang, Scientific reports, 2014, vol. 4, p. 6141.10.1038/srep06141 ↗
48. S. Mahajan, Metallurgical Transactions A, 1975, vol. 6A, pp. 1877-1886.10.1007/BF02646851 ↗
49. S. Mahajan, G. Chin, Acta metallurgica, 1973, vol. 21, pp. 1353-1363.10.1016/0001-6160(73)90085-0 ↗
50. K. Rahman, V. Vorontsov, D. Dye, Acta Materialia, 2015, vol. 89, pp. 247-257.10.1016/j.actamat.2015.02.008 ↗
51. C. Cayron, Crystals, 2018, vol. 8, p. 181.10.3390/cryst8040181 ↗
52. S. Pramanik, A.A. Gazder, A.A. Saleh, E.V. Pereloma, Materials Science and Engineering: A, 2018, vol. 731, pp. 506-519.10.1016/j.msea.2018.06.024 ↗
53. E.I. Galindo-Nava, P. Rivera-Díaz-del-Castillo, Acta Materialia, 2017, vol. 128, pp. 120-134.10.1016/j.actamat.2017.02.004 ↗
54. A.E. Pontini, J.D. Hermida, Scripta Mater., 1997, vol. 37, 1831–183710.1016/S1359-6462(97)00332-1 ↗
55. I. Robertson, Engineering Fracture Mechanics, 1999, vol. 64, pp. 649-673.10.1016/S0013-7944(99)00094-6 ↗
56. P. Ferreira, I.M. Robertson, H. Birnbaum, Materials Science Forum, 1996, vol. 207, pp. 93-96.10.4028/www.scientific.net/MSF.207-209.93 ↗
57. M. Whiteman, A. Troiano, PSSBR, 1964, vol. 7, pp. K109-K110.
58. J. Lu, L. Hultman, E. Holmström, K.H. Antonsson, M. Grehk, W. Li, L. Vitos, A. Golpayegani, Acta Materialia, 2016, vol. 111, pp. 39-46.10.1016/j.actamat.2016.03.042 ↗
59. G.M. de Bellefon, M. Gussev, A. Stoica, J. van Duysen, K. Sridharan, Scripta Materialia, 2018, vol. 157, pp. 162-166.10.1016/j.scriptamat.2018.08.012 ↗
60. G.M. de Bellefon, J. van Duysen, K. Sridharan, Journal of Nuclear Materials, 2017, vol. 492, pp. 227-230.10.1016/j.jnucmat.2017.05.037 ↗
61. Y. Petrov, International Journal of Materials Research, 2012, vol. 103, pp. 551-553.10.3139/146.110724 ↗
62. S. Yang, J. Spruiell, Journal of Materials Science, 1982, vol. 17, pp. 677-690.10.1007/BF00540364 ↗
63. T. Byun, Acta Materialia, 2003, vol. 51, pp. 3063-3071.10.1016/S1359-6454(03)00117-4 ↗
64. S. Pisarik, D.C. Van Aken, Metallurgical and Materials Transactions A, 2016, vol. 47, pp. 1009-1018.10.1007/s11661-015-3265-x ↗
65. J. Venables, Philosophical Magazine, 1962, vol. 7, pp. 35-44.10.1080/14786436208201856 ↗
66. T.-H. Lee, E. Shin, C.-S. Oh, H.-Y. Ha, S.-J. Kim, Acta Materialia, 2010, vol. 58, pp. 3173-3186.10.1016/j.actamat.2010.01.056 ↗
67. S. Martin, C. Ullrich, D. Rafaja, Materials Today: Proceedings, 2015, vol. 2, pp. S643-S646.10.1016/j.matpr.2015.07.366 ↗
68. C. Sinclair, R. Hoagland, Acta materialia, 2008, vol. 56, pp. 4160-4171.10.1016/j.actamat.2008.04.043 ↗
69. C. San Marchi, J.A. Ronevich, J.E.C. Sabisch, J.D. Sugar, D.L. Medlin, B. Somerday, Int. J. Hydrogen Energy, 2020.
70. A. Macadre, N. Nakada, T. Tsuchiyama, S. Takaki, International Journal of Hydrogen Energy, 2015, vol. 40, pp. 10697-10703.10.1016/j.ijhydene.2015.06.111 ↗
71. A. Macadre, T. Tsuchiyama, S. Takaki, Journal of Materials Science, 2017, vol. 52, pp. 3419-3428.10.1007/s10853-016-0630-0 ↗
72. B.P. Somerday, H.F. Jackson, C.W. San Marchi, 2011.
73. A.J. West, M.R. Louthan, Metallurgical Transactions A, 1982, vol. 13, pp. 2049-2058.10.1007/BF02645950 ↗
74. Y. Chang, C. Luo, C. Chen, S. Chen, Materials Science and Engineering: A, 2013, vol. 577, pp. 23-28.10.1016/j.msea.2013.04.030 ↗
75. K. Nibur, B. Somerday, D. Balch, C. San Marchi, Acta Mater., 2009, vol. 57, pp. 3795-3809.10.1016/j.actamat.2009.04.027 ↗