The Effect of β Stabilizers on the Structure and Energy of α/β Interfaces in Titanium Alloys
Source abstract
Abstract
The structure and energy associated with interfaces between the BCC and HCP lattices (β and α phase, respectively) in titanium alloys with commonly used β stabilizers were analyzed. For this purpose, the crystallographic structure of the matching facets of broad, side and end faces was described using misfit dislocations and structural ledges which compensate the mismatch in atomic spacing of the α and β phases. The effect of the β/α transformation temperature due to various concentration of β stabilizers on periodicity of misfit dislocations and structural ledges was estimated. The van der Merwe approach was used to calculate energy of different matching facets. An increase in the percentage of β-stabilizing elements was found to result in a decrease in the lattice-parameter ratio (aβ/aα) and an increase in the energy of all faces. The dependence of the interface energy on the aβ/aα ratio was for the first time quantified, and insight into the preferred shape of α-phase precipitates was obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. 1.U. Zwicker: Titan und titanlegierungen, Springer-Verlag Berlin Heidelberg, 1974, pp. 248–337.10.1007/978-3-642-80587-5_12 ↗
2. 2.E.W. Collings: The Physical metallurgy of titanium alloys, ASM, Metals Park, OH, 1984.
3. 3.G. Lütjering, J.C. Williams: Titanium, 2nd edition, Springer-Verlag, Berlin, 2007, pp. 203–336.
4. 4.S.L. Semiatin, D.U. Furrer: in S.L. Semiatin, D.U. Furrer (Eds.), ASM Handbook, vol. 22, Fundamentals of Modeling for Metals Processing, Materials Park, OH: ASM International, 2009, pp. 536–52.10.31399/asm.hb.v22a.a0005401 ↗
5. 5.D. Banerjee, J.C. Williams: Acta Mater., 2013, vol. 61, pp. 844–79.10.1016/j.actamat.2012.10.043 ↗
6. 6.A. Kelly, G.W. Groves, P. Kidd: Crystallography and crystal defects, Longman, London, 1970, pp.365–406.
7. R.W. Cahn, P. Haasen, eds.: Physical metallurgy. Elsevier, Amsterdam, 1996
8. D.E. Laughlin, K. Hono, eds.: Physical Metallurgy, Fifth edition, Newnes, Oxford, 2014
9. 9.M.I. Mazurski, G.A. Salishchev: Phys. Status Solidi B, 1995, vol. 187, pp. 501–09.10.1002/pssb.2221870232 ↗
10. 10.R. Shi, N.Ma, Y. Wang: Acta Mater., 2012, vol. 60, pp. 4172–84.10.1016/j.actamat.2012.04.019 ↗
11. J. Da CoastaTeixeira, B. Appolaire, E. Aeby-Gautier, S. Denis, F. Bruneseaux: Acta Mater., 2006, vol. 54, pp. 4261–71.10.1016/j.actamat.2006.05.019 ↗
12. 12.N. Ma, F. Yang, C. Shen, G. Wang, G.B. Viswanathan, P.C. Collins, D. Xu, R. Yang, H.L. Fraser, Y. Wang: in M. Ninomi, S. Akiyama, M. Ikeda, M. Hagiwara, K. Maruyama (eds.): Ti-2007 Science and Technology, The Japan Institute of Metals, 2007, pp. 287–290.
13. 13.J.H. van der Merwe: Proc. Phys. Soc. A, 1950, vol. 63, pp. 616–37.10.1088/0370-1298/63/6/310 ↗
14. 14.J.P. Hirth, G. Spanos, M.G. Hall, H.I. Aaronson: Acta Mater., 1998, vol. 46, pp. 857–68.10.1016/S1359-6454(97)00302-9 ↗
15. 15.G.J. Shiflet: Mater. Sci. Eng., 1986, vol. 81, pp. 61–100.10.1016/0025-5416(86)90254-5 ↗
16. 16.T. Furuhara, H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, pp. 2857–72.10.1016/0956-7151(91)90103-8 ↗
17. 17.E. S. K. Menon, H.I. Aaronson: Acta Metall., 1986, vol. 34, pp.1975–81.10.1016/0001-6160(86)90256-7 ↗
18. 18.T. Furuhara, H.J. Lee, E. S. K. Menon, H.I. Aaronson: Metall. Trans., 1990, vol. 21A, pp. 1627–43.10.1007/BF02672578 ↗
19. 19.T. Furuhara, J.M. Howe, H.I. Aaronson: Acta Metall. Mater., 1991, vol. 39, pp. 2873–86.10.1016/0956-7151(91)90104-9 ↗
20. T. Furuhara, T. Ogawa, T. Maki: Phil. Mag. Letters, 1995, vol. 72, pp. 175–83.10.1080/09500839508242449 ↗
21. 21.M.J. Mills, D.H. Hou, S. Suri, G.B. Viswanathan, in: R.C. Pond, W.A.T. Clark, A.H. King, D.B. Williams (eds.): Boundaries and interfaces in materials: the David A. Smith symposium. Warrendale, PA: TMS, 1998, pp. 295–301.
22. 22.S. Suri, G.B. Viswanathan, T. Neeraj, D.-H. Hou, M.J. Mills: Acta Mater., 1999, vol. 47, pp. 1019–34.10.1016/S1359-6454(98)00364-4 ↗
23. 23.N. Miyano, K. Ameyama, G.C. Weatherly: Materials Transactions, 2002, vol. 43, No.7, pp, 1547–5110.2320/matertrans.43.1547 ↗
24. 24.R.C. Pond, S. Celotto, J.P. Hirth: Acta Mater., 2003, vol. 51, pp. 5385–98.10.1016/S1359-6454(03)00395-1 ↗
25. 25.F. Ye, W.-Z. Zhang, D. Qiu: Acta Mater., 2004, vol. 52, pp. 2449–60.10.1016/j.actamat.2004.01.037 ↗
26. 26.F. Ye, W.-Z. Zhang: Acta Mater., 2006, vol. 54, pp. 871–79.10.1016/j.actamat.2005.10.017 ↗
27. 27.S. Nag, R. Banerjee, R. Srinivasan, J.Y. Hwang, M. Harper, H.L. Fraser: Acta Mater., 2009, vol. 57, pp. 2136–47.10.1016/j.actamat.2009.01.007 ↗
28. 28.J.H. van der Merwe, G.J. Shiflet, P.M. Stoop: Metall. Trans. A, 1991, vol. 22A, pp. 1165–75.10.1007/BF02660648 ↗
29. 29.J.H. van der Merwe, G.J. Shiflet: Acta Metall. Mater., 1994, vol. 42, pp. 1173–87.10.1016/0956-7151(94)90134-1 ↗
30. 30.S. Zherebtsov, G. Salishchev, S.L. Semiatin: Philos. Mag. Lett., 2010, vol. 90, pp. 903–14.10.1080/09500839.2010.521526 ↗
31. 31.M.A. Murzinova, S.V. Zherebtsov, G.A. Salishchev: Journal of Experimental and Theoretical Physics, 2016, vol. 122, No. 4, pp. 705–15.10.1134/S1063776116020205 ↗
32. 32.J.W. Elmer, T.A. Palmer, S.S. Babu, E.D. Specht: Mater. Sci. Eng. A, 2005, vol. 391, pp. 104–13.10.1016/j.msea.2004.08.084 ↗
33. 33.S. Malinov, W. Sha, Z. Guo, C.C. Tang, A.E. Long: Mater. Charact., 2002, vol. 48, pp. 279– 95.10.1016/S1044-5803(02)00286-3 ↗
34. A.A. Il’in, V.M. Maistrov, and V.V. Zasypkin: Metallofizika, 1986, vol. 8, No. 6, pp. 112–13 [in Russian].
35. A.A. Il’in, M.Yu. Kollerov, V.V. Zasypkin, V.M. Maistrov: Metalloved. Termich. Obrab. Met. 1986, No. 1, pp. 52–56 [in Russian].
36. 36.P. Barriobero-Vila, G. Requena, T. Buslaps, M. Alfeld, U. Boesenberg: J. Alloys Compd., 2015, vol. 626, pp. 330–39.10.1016/j.jallcom.2014.11.176 ↗
37. 37.A.K. Swarnakar, O. Van der Biest, B. Baufeld: J. Alloys Compd., 2011, vol. 509, pp. 2723–28.10.1016/j.jallcom.2010.12.014 ↗
38. J.L. Murray: Chromium – Titanium (1987), in: H. Baker, H. Okamoto eds., ASM Handbook Vol. 3: Alloy Phase Diagrams, ASM International, Materials Park, OH, 1998, pp. 709–10.
39. J.L. Murray: Iron—Titanium (1992), in: H. Baker, H. Okamoto eds., ASM Handbook Vol. 3: Alloy Phase Diagrams, ASM International, Materials Park, OH, 1998, pp. 869–70.
40. J.L. Murray: Manganese—Titanium (1987), in: H. Baker, H. Okamoto eds., ASM Handbook Vol. 3: Alloy Phase Diagrams, ASM International, Materials Park, OH, 1998, pp. 1133–34.
41. J.L. Murray: Molybdenum—Titanium (1987), in: H. Baker, H. Okamoto eds., ASM Handbook Vol. 3: Alloy Phase Diagrams, ASM International, Materials Park, OH, 1998, pp. 1156–57.
42. J.L. Murray: Niobium—Titanium (1987), in: H. Baker, H. Okamoto eds., ASM Handbook Vol. 3: Alloy Phase Diagrams, ASM International, Materials Park, OH, 1998, pp. 1193–94.
43. J.L. Murray, Titanium—Vanadium (1989), in: H. Baker, H. Okamoto eds., ASM Handbook Vol. 3: Alloy Phase Diagrams, ASM International, Materials Park, OH, 1998, pp. 1469–70.
44. J.L. Murray: Titanium—Tungsten (1987), in: H. Baker, H. Okamoto eds., ASM Handbook Vol. 3: Alloy Phase Diagrams, ASM International, Materials Park, OH, 1998, pp. 1470–71.
45. N.P. Lyakishev ed.: Equilibrium Diagrams of Binary Metal Systems. Reference Book, 3-Volume Set, Moscow, Engineering, 1996 [in Russian].
46. O. Nakano, H. Sasano, T. Suzuki, H. Kimura: J. Jpn. Inst. Met., 1981, vol. 45, No. 7, pp. 653–60.10.2320/jinstmet1952.45.7_653 ↗
47. R. Baloyi: M.S. Thesis, University of the Witwatersrand. Johannesburg, 2010. http://hdl.handle.net/10539/10621
48. 48.L.-C. Ming, M.H. Manghnani, K.W. Katahara: Acta Metall., 1981, vol. 29, pp. 479–85.10.1016/0001-6160(81)90071-7 ↗
49. 49.O.N. Senkov, B.C. Chakoumakos, J.J. Jonas, F.H. Froes: Mater. Res. Bul., 2001, vol. 36, pp. 1431–40.10.1016/S0025-5408(01)00604-3 ↗
50. V.E. Peletsky, V.Ya. Chekhovskoy, E.A. Belskaya: Thermophysical properties of titanium and its alloys, A.E. Sheindlin ed., Moscow, Metallurgy, 1985 [in Russian].
51. 51.T.V. Pryadko: Metallofiz. Noveishie Tekhnol., 2015, vol. 37, No. 2, pp. 243–55 [in Russian].10.15407/mfint.37.02.0243 ↗
52. R.G. Innes: M.S. Thesis, US Air Force Institute of Technology (AFIT-SE), Wright-Patterson Air Force Base, Ohio, 1968. https://archive.org/details/DTIC_AD0835852/mode/2up
53. 53.E.S. Fisher, C.J. Renken: Phys. Rev., 1964, vol. 135(2A), A482–94.10.1103/PhysRev.135.A482 ↗
54. 54.H. Ogi, S. Kai, H. Ledbetter, R. Tarumi, M. Hirao, K. Takashima: Acta Mater., 2004, vol. 52, pp, 2075–80.10.1016/j.actamat.2004.01.002 ↗
55. 55.O.N. Senkov, M. Dubois, J.J. Jonas: Metall. Mater. Trans. A, 1996, vol. 27, pp. 3963–70.10.1007/BF02595645 ↗
56. 56.T.D. Shermergor: Theory of elasticity for micro-nonhomogeneous media, Nauka, Moscow, 1977 [in Russian].
57. 57.W.T. Read, W. Shockley: Phys. Rev., 1950, vol. 78, No. 3, 275-89.10.1103/PhysRev.78.275 ↗
58. 59.A.S. Gornakova, S.I. Prokofjev: J Mater Sci., 2020, vol. 55, pp. 9225–36.10.1007/s10853-020-04432-w ↗
59. 58.A.S. Gornakova, B.B. Straumal, A.N. Nekrasov, A. Kilmametov, N.S. Afonikova: J. Mater. Eng. Perf., 2018, vol. 27, No. 10, pp. 4989–92.10.1007/s11665-018-3300-3 ↗