journal article·2020-07

Suppression of Discontinuous Precipitation in Cu-Ti Alloys by Aging in a Hydrogen Atmosphere

Satoshi Semboshi, Yasuyuki Kaneno, Takayuki Takasugi, Naoya Masahashi

Publisher page

Abstract

Age-hardened Cu-Ti alloys are widely used as conductive materials in small electrical devices, so it is important for them to have suitable mechanical and electrical properties. One of the principal guidelines for improving the mechanical properties of Cu-Ti alloys is to suppress the formation of coarse discontinuous precipitates within them. Herein, we investigated the microstructure and properties of a Cu-4 at. pct Ti alloy aged under hydrogen pressures of 0 to 0.6 MPa, focusing on discontinuous precipitation at the grain boundaries. During the early stages of aging, fine needle-shaped metastable β′-Cu4Ti precipitates formed continuously in the matrix. With further aging, these β′-Cu4Ti precipitates continued to nucleate and grow, and simultaneously cellular components composing of the lamellae of Cu solid solution and the stable β-Cu4Ti discontinuous precipitates were formed at grain boundaries. Nevertheless, the formation of these cellular components was significantly suppressed when aging under hydrogen pressures of above 0.03 MPa. Upon aging under higher hydrogen pressures (> 0.10 MPa), some granular TiH2 precipitates formed, and the preformed β′-Cu4Ti precipitates decomposed. Upon aging under 0.03 MPa hydrogen pressure, fine metastable β′-Cu4Ti precipitates were formed dominantly, because the formation of stable β-Cu4Ti laminates was suppressed and the TiH2 precipitates was still not formed. Hence, the hardness was maintained under over-aging conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. A. Datta and W.A. Soffa: Acta Metall., 1976, vol. 24, pp. 987–1001.10.1016/0001-6160(76)90129-2 ↗
2. S. Nagarjuna, M. Srinivas, K. Balasubramanian and D. S. Sarma: Acta Metall., 1996, vol. 44, pp. 2285–93.
3. C. Borchers: Philos. Mag. A., 1999, vol. 79, pp. 537–47.10.1080/01418619908210315 ↗
4. W.A. Soffa and D. E. Laughlin: Prog. Mater. Sci., 2004, vol. 49, pp. 347–66.10.1016/S0079-6425(03)00029-X ↗
5. D. Bozic, J. Stasic, J. Ruzic, M. Vilotijevic and V. Rajkovic: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8139–8144.10.1016/j.msea.2011.07.061 ↗
6. M. Sobhani, A. Mirhabibi, H. Arabi and R.M.D. Brydson: Mater. Sci. Eng. A, 2013, vol. 577, pp. 16–22.10.1016/j.msea.2013.03.063 ↗
7. S. Semboshi, S. Amano, J. Fu, A. Iwase and T. Takasugi: Metall. Mater. Trans. A, 2017, vol. 48, pp. 1501–11.10.1007/s11661-016-3949-x ↗
8. R.C. Ecob, J.V. Bee and B. Ralph: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 1407–14.10.1007/BF02653496 ↗
9. A.A. Hameda and L. Blaz: Mater. Sci. Eng. A, 1998, vol. 254, pp. 83–9.10.1016/S0921-5093(98)00753-9 ↗
10. R.W. Fonda and G.J. Shiflet: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2507–18.10.1007/s11661-002-0372-2 ↗
11. C.R. Hutchinson, R.E. Hackenberg and G.J. Shiflet: Ultramicroscopy, 2003, vol. 94, pp. 37–48.10.1016/S0304-3991(02)00193-6 ↗
12. S. Semboshi, M. Ishikuro, S. Sato, K. Wagatsuma, A. Iwase and T. Takasugi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3401–11.10.1007/s11661-014-2293-2 ↗
13. M. Song and K. Chen: J. Mater. Sci., 2008, vol. 43, pp. 5265–73.10.1007/s10853-008-2773-0 ↗
14. Y. Tang, G. Zhu, Y. Kang, L. Yue and X. Jiao: J. Alloys Compd., 2016, vol. 663, pp. 784–95.10.1016/j.jallcom.2015.12.017 ↗
15. M. Goto, T. Yamamoto, S.Z. Han, S.H. Lim, S. Kim, T. Iwamura, J. Kitamura, J.-H. Ahn, T. Yakushiji and J. Lee: Mater. Sci. Eng. A, 2019, vol. 747, pp. 63–72.10.1016/j.msea.2019.01.057 ↗
16. D.B. Williams and E. P. Butler: Int. Met. Rev., 1981, vol. 26, pp. 153-83.10.1179/imr.1981.26.1.153 ↗
17. D. Duly, Y. Brechet and B. Checal: Acta Metall., 1992, vol. 40, pp. 2289-2300.10.1016/0956-7151(92)90147-7 ↗
18. I. Manna: Interface Sci., 1998, vol. 6, pp. 113-131.10.1023/A:1008672705642 ↗
19. T.-H. Lee, H.-Y. Ha and S.J. Kim: Metall. Mater. Trans. A, 2011, vol. 42A, 3543-48.10.1007/s11661-011-0924-4 ↗
20. D.H. Bechetti, J.N. Dupont, M. Watanabe and J.J. Barbadillo: Metall. Mater. Trans. A, 2017, vol. 48A, 1727-43.10.1007/s11661-016-3952-2 ↗
21. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed.; Elsevier, UK, 2004, pp. 91–118.10.1016/B978-008044164-1/50008-6 ↗
22. S. Semboshi, M. Sato, Y. Kaneno, A. Iwase and T. Takasugi: Materials, 2017, vol. 10, 41510.3390/ma10040415 ↗
23. S. Semboshi, J. Ikeda, A. Iwase, T. Takasugi and S. Suzuki: Materials, 2015, vol. 8, pp. 3467–78.10.3390/ma8063467 ↗
24. D. Božić and M. Mitkov: Mater. Sci. Technol., 1992, vol. 8, pp. 1108–16.10.1179/mst.1992.8.12.1108 ↗
25. C. Apblett, D. Muira, M. Sullivan and P.J. Ficalora: J. Appl. Phys., 1992, vol. 71, pp. 4925–32.10.1063/1.350641 ↗
26. S. Semboshi and T.J. Konno: J. Mater. Res., 2008, vol. 23, pp. 473–7.10.1557/JMR.2008.0050 ↗
27. S. Semboshi, T. Nishida and H. Numakura: Mater. Sci. Eng. A, 2009, vol. 517, pp. 105–13.10.1016/j.msea.2009.03.047 ↗
28. M. Okada, A. Kamegawa, J. Nakahigashi, A. Yamaguchi, A. Fujita and M. Yamauchi: Mater. Sci. Eng. B, 2010, vol. 173, pp. 253–9.10.1016/j.mseb.2010.02.004 ↗
29. S. Semboshi, T. Nishida, H. Numakura, T. Al-Kassaab and R. Kirchheim: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2136–43.10.1007/s11661-011-0637-8 ↗
30. George E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill Book Co., New York, NY, 1976, pp. 160–5.
31. D.S. Park and S.W. Nam: J. Mater. Sci., 1995, vol. 30, pp. 1313–20.10.1007/BF00356137 ↗
32. A.B. Pandey, B.S. Majumdar and D.B. Miracle: Metall. Mater. Trans. A, 2000, vol. 30, pp. 921–36.10.1007/s11661-000-1011-4 ↗
33. T. Ogura, S. Hirosawa and T. Sato: Sci. Technol. Adv. Mater., 2004, vol. 5, 491–6.10.1016/j.stam.2004.02.007 ↗
34. H.Y. Li, W. Kang and X.C. Lu: J. Alloys Compd., 2015, vol. 640, 210–8.10.1016/j.jallcom.2015.03.212 ↗
35. S. Nagarjuna, M. Srinivas, K. Balasubramanian and D.S. Sarma: Mater. Sci. Eng. A, 1999, vol. 259, pp. 34–42.10.1016/S0921-5093(98)00882-X ↗
36. J. Miyage and M.E. Fine: Acta Metall., 1992, vol. 40, pp. 733–41.10.1016/0956-7151(92)90015-7 ↗
37. H. Wei, Y. Cui, H. Cui, Y. Wei and L. Hou: Mater. Sci. Eng. A, 2017, vol. 707, pp. 309–98.10.1016/j.msea.2017.09.072 ↗