journal article·2017-02Open access

Static Softening in a Ni-30Fe Austenitic Model Alloy After Hot Deformation: Microstructure and Texture Evolution

Hossein Beladi, Pavel Cizek, Adam S. Taylor, Gregory S. Rohrer, Peter D. Hodgson

Abstract

In the current study, the microstructure and texture characteristics of a model Ni-30Fe austenitic alloy were investigated during hot deformation and subsequent isothermal holding. The deformation led to the formation of self-screening arrays of microbands within a majority of grains. The microbands characteristics underwent rather modest changes during the post-deformation annealing, which suggests that limited dislocation annihilation occurs within the corresponding dislocation walls. The fraction of statically recrystallized (SRX) grains progressively increased with the holding time and closely matched the softening fraction measured from the offset flow stress approach. The corresponding texture was weak and preserved its character with the holding time. There was no pronounced temperature effect on the grain boundary character distribution after the completion of SRX. The Σ3 and Σ9 coincidence site lattice boundaries were characterized as (111) pure twist and (1−14) symmetric tilt types, respectively. Nonetheless, the recrystallization temperature slightly affected the grain boundary network.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. [1] F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Science, New York, 2004.
2. [2] C.M. Sellars and J.A. Whiteman: Met. Sci., 1979, vol. 13, pp. 187-194.10.1179/msc.1979.13.3-4.187 ↗
3. [3] S-H. Cho, K-B. Kang, and J.J. Jonas: ISIJ Intern., 2001, vol. 41, pp. 766-773.10.2355/isijinternational.41.766 ↗
4. [4] H. Beladi and P.D. Hodgson: Scripta Mater., 2007, vol. 56, pp. 1059-1062.10.1016/j.scriptamat.2007.02.029 ↗
5. [5] P.J. Hurley, B.C. Muddle, and P.D. Hodgson: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1507-1517.10.1007/s11661-001-0238-z ↗
6. [6] W.M. Rainforth, M.P. Black, R.L. Higginson, E.J. Palmiere, C.M. Sellars, I. Prabst, P. Warbichler, and F. Hofer: Acta Mater., 2002, vol. 50, pp. 735–747.10.1016/S1359-6454(01)00389-5 ↗
7. [7] Y. Adachi, M. Wakita, H. Beladi, and P.D. Hodgson: Acta Mater., 2007, vol. 55, pp. 4925-4934.10.1016/j.actamat.2007.05.024 ↗
8. [8] A.S. Taylor, P. Cizek, and P.D. Hodgson: Acta Mater., 2011, vol. 59, pp. 5832-5844.10.1016/j.actamat.2011.05.060 ↗
9. [9] H. Beladi, P. Cizek, and P.D. Hodgson, Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1175-1189.10.1007/s11661-009-9799-z ↗
10. [10] H. Beladi, P. Cizek, and P.D. Hodgson: Acta Mater., 2010, vol. 58, pp. 3531-3541.10.1016/j.actamat.2010.02.026 ↗
11. [11] H. Beladi, P. Cizek, and P.D. Hodgson: Acta Mater., 2011, vol. 59, pp. 1482-1492.10.1016/j.actamat.2010.11.012 ↗
12. [12] A.S. Taylor, P. Cizek, and P.D. Hodgson: Acta Mater., 2012, vol. 60, pp. 1548-1569.10.1016/j.actamat.2011.11.048 ↗
13. [13] D. Poddar, P. Cizek, H. Beladi, and P.D. Hodgson: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5933-5951.10.1007/s11661-015-3182-z ↗
14. [14] D. Poddar, P. Cizek, H. Beladi, and P.D. Hodgson: Acta Mater., 2015, vol. 99, pp. 347-362.10.1016/j.actamat.2015.08.003 ↗
15. [15] Q. Liu, D. Juul Jensen, and N. Hansen: Acta Mater. 1998, vol. 46, pp. 5819-5838.10.1016/S1359-6454(98)00229-8 ↗
16. [16] Q.Z. Chen, A.H.W. Ngan, and B.J. Duggan, Proc. R. Soc. Lond. A, 2003, vol. 459, pp. 1661-1685.10.1098/rspa.2002.1051 ↗
17. [17] P. Cizek, F. Bai, E.J. Palmiere, and W.M. Rainforth: J. Microsc., 2005, vol. 217, pp. 138–151.10.1111/j.1365-2818.2005.01429.x ↗
18. [18] V. Randle: Acta Mater., 1999, vol. 47, pp. 4187-4196.10.1016/S1359-6454(99)00277-3 ↗
19. [19] A. Saeed-Akbari, J. Imlau, U. Prahl, and W. Bleck: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3076–90.10.1007/s11661-009-0050-8 ↗
20. [20] G.S. Rohrer, D.M. Saylor, B. El Dasher, B.L. Adams, A.D. Rollett, and P. Wynblatt: Z. Metallkd., 2004, vol. 95, pp. 1–18.10.3139/146.017934 ↗
21. [21] W. Charnock and J. Nutting: Met. Sci. J., 1967, vol. 1, pp. 123-127.10.1179/msc.1967.1.1.123 ↗
22. P.D. Hodgson, D.C. Collinson, and B. Perrett: Proc. of the Int. Symp. on Physical Simulation, NRIM, Tsukuba, 1997, pp. 219–23.
23. [23] D.S. Fields, W.A. Backofen: Proc. Am. Soc. Test. Mater., 1957, vol. 75, pp. 1259-1272.
24. [24] H.J. Bunge: Texture Analysis in Materials Science: Mathematical Methods, Butterworths, London, 1982.
25. [25] L.S. Toth, P. Gilormini, and J.J. Jonas: Acta Metall., 1988, vol. 36, pp. 3077-3091.10.1016/0001-6160(88)90045-4 ↗
26. [26] A.M. Wusatowska-Sarnek, H. Miura, and T. Sakai: Mater. Sci. Eng. A, 2002, vol. 323, pp. 177-186.10.1016/S0921-5093(01)01336-3 ↗
27. [27] H. Beladi, N.T. Nuhfer, and G.S. Rohrer: Acta Mater., 2014, vol. 70, pp. 281-289.10.1016/j.actamat.2014.02.038 ↗
28. [28] J. Li, S.J. Dillon, and G.S. Rohrer: Acta Mater., 2009, vol. 57, pp. 4304-4311.10.1016/j.actamat.2009.06.004 ↗
29. [29] S. Poulat, B. Décamps, and L. Priester: Philos. Mag. A, 1998, vol. 77, pp. 1381–1397.10.1080/01418619808214259 ↗
30. [30] J.J. Jonas and L.S. Toth: Scripta Metall. Mater., 1992, vol. 27, pp. 1575-1580.10.1016/0956-716X(92)90147-7 ↗
31. [31] D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479-1484.10.1016/0001-6160(66)90168-4 ↗
32. [32] H. Beladi, G.S. Rohrer, A.D. Rollett, V. Tari, and P.D. Hodgson: Acta Mater., 2014, vol. 63, pp. 86-98.10.1016/j.actamat.2013.10.010 ↗
33. [33] V. Randle, G.S. Rohrer, and Y. Hu: Scripta Mater., 2008, vol. 58, pp. 183-186.10.1016/j.scriptamat.2007.09.044 ↗
34. [34] W. Form, G. Gindraux, and V. Mlyncar: Met. Sci., 1980, vol. 14, pp. 16-20.10.1179/030634580790438190 ↗
35. [35] T. Watanabe, H. Fujii, H. Oikawa, and K.I. Arai: Acta Metall., 1989, vol. 37, pp. 941-952.10.1016/0001-6160(89)90021-7 ↗
36. [36] G.S. Rohrer, V. Randle, C-S. Kim, and Y. Hu: Acta Mater., 2006, vol. 54, pp. 4489-4502.10.1016/j.actamat.2006.05.035 ↗
37. [37] S.L. Shang, C.L. Zacherl, H.Z. Fang, Y. Wang, Y. Du, and Z.K. Liu: J. Phys. Cond. Matter, 2012, vol. 24, pp. 1-14.