journal article·2016-09

Processing, Microstructure, and Oxidation Behavior of Iron Foams

Hyeji Park, Yoonsook Noh, Hyelim Choi, Kicheol Hong, Kyungjung Kwon, Heeman Choe

Publisher page

Abstract

With its historically long popularity in major structural applications, the use of iron (Fe) has also recently begun to be explored as an advanced functional material. For this purpose, it is more advantageous to use Fe as a porous structure, simply because it can provide a greater surface area and a higher reaction rate. This study uses a freeze-casting method, which consists of simple and low-cost processing steps, to produce Fe foam with a mean pore size of 10 μm. We examine the influences of various parameters (i.e., mold bottom temperature, powder content, and sintering time) on the processing of Fe foam, along with its oxidation kinetics at 823 K (550 °C) with various heat-treatment times. We confirm that Fe2O3 and Fe3O4 oxide layers are successfully formed on the surface of Fe foam. With the Fe oxide layers as an active anode material, the Fe foam can potentially be used as a three-dimensional anode current collector for an advanced lithium-ion battery.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. B.H. Smith, S. Szyniszewski, J.F. Hajjar, B.W. Schafer, and S.R. Arwade: J. Constr. Steel Res., 2012, vol. 71, pp. 1–10.10.1016/j.jcsr.2011.10.028 ↗
2. P.A. Xu, G.M. Zeng, D.L. Huang, C.L. Feng, S. Hu, M.H. Zhao, C. Lai, Z. Wei, C. Huang, and G.X. Xie: Sci. Total Environ., 2012, vol. 424, pp. 1–10.10.1016/j.scitotenv.2012.02.023 ↗
3. A.B. Cundy, L. Hopkinson, and R.L.D. Whitby: Sci. Total Environ., 2008, vol. 400, pp. 42–51.10.1016/j.scitotenv.2008.07.002 ↗
4. J. Chen, L.N. Xu, W.Y. Li, and X.L. Gou: Adv. Mater., 2005, vol. 17, pp. 582–586.10.1002/adma.200401101 ↗
5. S. Jin, H. Deng, D. Long,, X. Liu, L. Zhan, X. Liang, W. Qiao, and L. Ling: J. Power Sources, 2011, vol. 196, pp. 3887–3893.10.1016/j.jpowsour.2010.12.078 ↗
6. J. Capek, and D. Vojtech: Mater. Sci. Eng., 2014, vol. 43, pp. 494–501.10.1016/j.msec.2014.06.046 ↗
7. M. Peustera, C. Hessea, T. Schlooa, C. Finkb, P. Beerbauma, and C.V. Schnakenburg: biomaterials, 2006, vol. 27, pp. 4955–4962.10.1016/j.biomaterials.2006.05.029 ↗
8. M.F. Ashby, A.G. Evans, N.A. Fleck, L.J. Gibson, J.W. Hutchinson, and H.N.G. Wadley: Metal Foams: A Design Guide, Butterworth-Heinemann, Boston, 2000.
9. J. Banhart: Prog. Mater Sci., 2001, vol. 46, pp. 559–632.10.1016/S0079-6425(00)00002-5 ↗
10. L.P. Lefebvre, J. Banhart, and D.C. Dunand: Adv. Eng. Mater., 2008, vol. 10, pp. 775–787.10.1002/adem.200800241 ↗
11. C. Park, and S.R. Nutt: Mater. Sci. Eng. A, 2001, vol. 229, pp. 68–74.10.1016/S0921-5093(00)01418-0 ↗
12. T. Murakami, K. Ohara, T. Narushima, and C. Ouchi: Mater. Trans., 2007, vol. 48, pp. 2937–2944.10.2320/matertrans.MRA2007127 ↗
13. T. Murakami, T. Akagi, and E. kasai: Proc. Mater. Sci., 2014, vol. 4, pp. 27–32.10.1016/j.mspro.2014.07.585 ↗
14. S.T. Szyniszewski, B.H. Smith, J.F. Hajjar, B.W. Schafer, and S.R. Arwade: Mater. Des., 2014, vol. 54, pp. 1083–1094.10.1016/j.matdes.2013.08.045 ↗
15. T. Ikeda, T. Aoki, and H Nakajima: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 77–86.10.1007/s11661-005-0140-1 ↗
16. M. Vesenjak, A. Kovacic, M. Tane, M. Borovinsek, H. Nakajima, and Z.R. Ren: Comput. Mater. Sci, 2012, vol. 65, pp. 37–43.10.1016/j.commatsci.2012.07.004 ↗
17. S. Deville: Adv. Eng. Mater., 2008, vol. 10, pp. 155–69.10.1002/adem.200700270 ↗
18. S. Deville, E. Saiz, and A.P. Tomsia: Acta Mater., 2007, vol. 55, pp. 1965–74.10.1016/j.actamat.2006.11.003 ↗
19. U.G.K. Wegst, M. schecter, A.E. Donius, and P.M. Hunger: Phil. Trans. R. Soc. A, 2010, vol. 368, pp. 2099–121.10.1098/rsta.2010.0014 ↗
20. Y. Chino, and D.C. Dunand: Acta Mater., 2008, vol. 56, pp. 105–113.10.1016/j.actamat.2007.09.002 ↗
21. S. Deville, E. Saiz, and A.P. Tomsia: Biomaterials, 2006, vol. 27, pp. 5480–5489.10.1016/j.biomaterials.2006.06.028 ↗
22. M.E. Launey, E. Munch, D.H. Alsem, H.B. Barth, E. Saiz, A.P. Tomsia, and R.O. Richie: Acta Mater., 2009, vol. 57, pp. 2919–2932.10.1016/j.actamat.2009.03.003 ↗
23. S. Deville, E. Saiz, R.K. Nalla, and A.P. Tomsia: Science, 2006, vol. 311, pp. 515–518.10.1126/science.1120937 ↗
24. H.-Y. Lin, Y.-W. Chen, and C. Li: Thermochim. Acta, 2003, vol. 400, pp. 61–67.10.1016/S0040-6031(02)00478-1 ↗
25. W.K. Jozwiak, E. Kaczmarek, T.P. Maniecki, W. Ignaczak, and W. Maniukiewicz: Appl. Catal., A, 2007, vol. 326, pp. 17–27.10.1016/j.apcata.2007.03.021 ↗
26. W.L. Li, K. Lu, J.Y. Walz: Int. Mater. Rev., 2012, vol. 57, pp. 37–60.10.1179/1743280411Y.0000000011 ↗
27. H. Park, M. Choi, H. Choe, and D.C. Dunand: Mater. Char., 2016, in review.
28. L.Y. Chen, J.Q. Xu, H. Choi, M. Pozuelo, X. Ma, S. Bhowmick, J.M. Yang, S. Mathaudhu, and X.C. Li: Nature, 2012, vol. 528, pp. 539–543.10.1038/nature16445 ↗
29. N.O. Shanti, K. Araki, and J.W. Halloran: J. Am. Ceram. Soc., 2006, vol. 89, pp. 2444–2447.10.1111/j.1551-2916.2006.01094.x ↗
30. H. Jo, M. Kim, H. Choi, Y. Sung, H. Choe, and D.C. Dunand: Metall. Mater. Trans. E, 2016, vol. 3, pp. 46–54.
31. Y.M. Lin, P.R. Abel, A. Heller, and C.B. Mullins: J. Phys. Chem. Lett., 2011, vol. 2, pp. 2885–2891.10.1021/jz201363j ↗
32. J.H. Um, H. Park, Y.H. Cho, M. Glazer, D.C. Dunand, H. Choe, and Y.E. Sung: RSC Adv., 2014, vol. 4, pp. 58059–58063.10.1039/C4RA12297F ↗
33. X. Xu, R. Cao, S. Jeong, and J. Cho: Nano Lett., 2012, vol. 12, pp. 4988–4991.10.1021/nl302618s ↗
34. E.A. Brandes and G.B. Brook: Smithells metals reference book, 7th ed., Butterworth-Heinemann, USA, 1992.
35. H.J.T. Ellingham: J. Soc. Chem. Ind., 1944, vol. 63, pp. 125–160.10.1002/jctb.5000630501 ↗
36. R.Y. Chen, and W.Y.D. Yuen: Oxid. Met., 2003, vol. 59, pp. 433–468.10.1023/A:1023685905159 ↗
37. N. Bertrandl, C. Desgranges, D. Gauvain, D. Monceau, and D. Poquillon: Mater. Sci. Forum., 2004, vol. 461–464, pp. 591–598.10.4028/www.scientific.net/MSF.461-464.591 ↗
38. G.B. Gibbs, M.R. Wootton, W.R. Price, and K.E. Hodgson: Oxid. Met., 1973, vol. 7, pp. 185–200.10.1007/BF00610579 ↗