journal article·2012-02

Influence of Nitrogen Content on Thermal Stability and Grain Growth Kinetics of Cryomilled Al Nanocomposites

L. Hashemi-Sadraei, S. E. Mousavi, R. Vogt, Y. Li, Z. Zhang, E. J. Lavernia, J. M. Schoenung

Publisher page

Abstract

Nanocomposite powders of Al 5083/B4C were produced via cryogenic milling (cryomilling) of boron carbide (B4C) particles in Al 5083 matrix. The effect of milling time (up to 24 hours), and consequential nitrogen content, on grain growth in the nanocrystalline Al 5083 matrix was investigated. Thermal stability was studied at temperatures as high as ~0.96 T m and annealing times of up to 24 hours. Average grain sizes increased with time and temperature and tended to stabilize after longer annealing times, regardless of nitrogen content. Higher thermal stability was observed in samples with higher nitrogen content, with the average grain size remaining in the range of 30 nm, even after exposure to the most extreme annealing conditions. This behavior was attributed to the retarding effect that nitrides have on grain growth, as a result of pinning grain boundaries. Kinetic studies based on the Burke equation showed two thermally activated grain growth regimes—a low-temperature regime with an activation energy of 15 kJ/mol and a high-temperature regime with an activation energy of 58 kJ/mol.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. J.M. Schoenung, J. Ye, J. He, F. Tang, and D. Witkin: Materials Forum, vol. 29, J.F. Nie and M. Barnett, eds., Institute of Materials Engineering Australia Ltd., North Melbourne, 2005, pp. 123–28.
2. J. Ye, J. He, and J.M. Schoenung: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3099-3109.10.1007/s11661-006-0190-z ↗
3. J. Ye, Z. Lee, B. Ahn, J. He, S.R. Nutt, and J.M. Schoenung: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3111-17.10.1007/s11661-006-0191-y ↗
4. J. Ye, B.Q. Han, Z. Lee, B. Ahn, S.R. Nutt, and J.M. Schoenung: Scripta Mater., 2005, vol. 53, pp. 481-86.10.1016/j.scriptamat.2005.05.004 ↗
5. R.G. Vogt, Z. Zhang, T.D. Topping, E.J. Lavernia, and J.M. Schoenung: J. Mater. Process. Tech., 2009, vol. 209, no. 11, pp. 5046-53.10.1016/j.jmatprotec.2009.02.002 ↗
6. F. Tang, X.L. Wu, S.R. Ge, J.C. Ye, H. Zhu, M. Hagiwara, and J.M. Schoenung: Wear, 2008, vol. 264, nos. 7–8, pp. 555-61.10.1016/j.wear.2007.04.006 ↗
7. Y. Li, W. Liu, V. Ortalan, W.F. Li, Z. Zhang, R. Vogt, N.D. Browning, E.J. Lavernia, and J.M. Schoenung: Acta Mater., 2010, vol. 58, no. 5, pp. 1732-40.10.1016/j.actamat.2009.11.015 ↗
8. Y.F. Zhang, L. Lu, and S.M. Yap: J. Mater. Process. Tech., 1999, vol. 90, pp. 260-65.10.1016/S0924-0136(99)00042-4 ↗
9. C. Suryanarayana: Progr. Mater. Sci., 2001, vol. 46, nos. 1–2, pp. 1-184.10.1016/S0079-6425(99)00010-9 ↗
10. Z.H. Zhang, S. Dallek, R. Vogt, Y. Li, T.D. Topping, Y.Z. Zhou, J.M. Schoenung, and E.J. Lavernia: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 532-41.10.1007/s11661-009-0089-6 ↗
11. J.R. Scully, G.A. Young, and S.W. Smith: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1583-99.10.4028/www.scientific.net/MSF.331-337.1583 ↗
12. B. Ahn, A.P. Newbery, E.J. Lavernia, and S.R. Nutt: Mater. Sci. Eng. A, 2007, vol. 463, nos. 1–2, pp. 61-66.10.1016/j.msea.2006.07.158 ↗
13. F. Zhou, J. Lee, S. Dallek, and E.J. Lavernia: J. Mater. Res., 2001, vol. 16, no. 12, pp. 3451-58.10.1557/JMR.2001.0474 ↗
14. F. Zhou, J. Lee, and E.J. Lavernia: Scripta Mater., 2001, vol. 44, nos. 8–9, pp. 2013-17.10.1016/S1359-6462(01)00826-0 ↗
15. V.L. Tellkamp, S. Dallek, D. Cheng, and E.J. Lavernia: J. Mater. Res., 2001, vol. 16, no. 4, pp. 938-44.10.1557/JMR.2001.0133 ↗
16. I. Roy, M. Chauhan, E.J. Lavernia, and F.A. Mohamed: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 721-30.10.1007/s11661-006-0044-8 ↗
17. P.A. Beck, J.C. Kremer, L.J. Demer, and M.L. Holzworth: Trans. AIME, 1947, vol. 175, pp. 372-400.
18. R.J. Perez, H.G. Jiang, C.P. Dogan, and E.J. Lavernia: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2469-75.10.1007/s11661-998-0218-7 ↗
19. M.J. Luton, C.S. Jayanth, M.M. Disko, S. Matras, and J. Vallone: Materials Research Society Symp. Proc., 1989, vol. 132, pp. 79-86.10.1557/PROC-132-79 ↗
20. T.R. Malow and C.C. Koch: Acta Mater., 1997, vol. 45, no. 5, pp. 2177-86.10.1016/S1359-6454(96)00300-X ↗
21. D.B. Witkin and E.J. Lavernia: Progr. Mater. Sci., 2006, vol. 51, pp. 1-60.10.1016/j.pmatsci.2005.04.004 ↗
22. J.E. Burke: Trans. AIME, 1949, vol. 180, pp. 73-91.
23. B. Huang, R.J. Perez, and E.J. Lavernia: Mater. Sci. Eng. A, 1998, vol. 255, nos. 1–2, pp. 124-32.10.1016/S0921-5093(98)00765-5 ↗
24. B. Yao, C. Hofmeister, T. Patterson, Y.-H. Sohn, M.V.D. Bergh, T. Delahanty, and K. Cho: Compos. A Appl. S., 2010, vol. 41, no. 8, pp. 933-41.10.1016/j.compositesa.2010.02.013 ↗
25. F. Tang, C.P. Liao, B. Ahn, S.R. Nutt, and J.M. Schoenung: Powder Metall., 2007, vol. 50, no. 4, pp. 307-12.10.1179/174329007X189630 ↗
26. Y. Li, Y.H. Zhao, V. Ortalan, W. Liu, Z.H. Zhang, R.G. Vogt, N.D. Browning, E.J. Lavernia, and J.M. Schoenung: Mater. Sci. Eng. A., 2009, vol. 527, nos. 1–2, pp. 305-16.10.1016/j.msea.2009.07.067 ↗
27. Z. Zhang, F. Zhou, and E.J. Lavernia: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1349-55.10.1007/s11661-003-0246-2 ↗
28. J. He, J. Ye, E.J. Lavernia, D. Matejczyk, C. Bampton, and J.M. Schoenung: J. Mater. Sci., 2004, vol. 39, pp. 6957-64.10.1023/B:JMSC.0000047538.95825.ad ↗
29. L. Hashemi-Sadraei: Masters Thesis, University of California, Davis, CA, 2010.
30. L. Shaw, H. Luo, J. Villegas, and D. Miracle: Acta Mater., 2003, vol. 51, pp. 2647-63.10.1016/S1359-6454(03)00075-2 ↗
31. J. Stoer and R. Bulirsch: Introduction to Numerical Analysis, 2nd ed., Springer-Verlag, New York, NY, 1993.10.1007/978-1-4757-2272-7 ↗
32. F.A. Mohamed: Acta Mater., 2003, vol. 51, no. 14, pp. 4107-19.10.1016/S1359-6454(03)00230-1 ↗
33. M.V. Zdujic, K.F. Kobayashi, and P.H. Shingu: J. Mater. Sci., 1991, vol. 26, no. 20, pp. 5502-08.10.1007/BF02403949 ↗
34. D. Oleszak and P.H. Shingu: J. Appl. Phys., 1996, vol. 79, no. 6, pp. 2975-80.10.1063/1.361294 ↗
35. H.P. Klug and L.E. Alexander: X-Ray Diffraction Procedures for Polycrystalline and Amorphous Materials, 2nd ed., Wiley, New York, NY, 1974.
36. B.Q. Han, Z. Zhang, and E.J. Lavernia: Phil. Mag. Lett., 2005, vol. 85, no. 2, pp. 97-108.10.1080/09500830500153701 ↗
37. C.S. Smith: Trans. AIME, 1948, vol. 175, pp. 15-51.
38. ASM International: ASM Handbook, 10th ed., vol. 2, ASM International, Materials Park, OH, 1990.
39. J.E. Burke: J. Appl. Phys., 1947, vol. 18 (11), p. 1028.10.1063/1.1697574 ↗
40. T.R. Malow and C.C. Koch: Proc. TMS Annual Meeting, Warrendale, PA. 1996.
41. H. Altherthum: Z. Metallkd., 1922, vol. 14, pp. 417-24.
42. S.E. Maddigan: Trans. AIME, 1949, vol. 185, no. 11, pp. 881-86.
43. T.R. Malow and C.C. Koch: Mater. Sci. Forum, 1996, vol. 225, pp. 595-604.10.4028/www.scientific.net/MSF.225-227.595 ↗
44. F.A. Mohamed and T.G. Langdon: Metall. Trans., 1974, vol. 5, pp. 2339-45.10.1007/BF02644014 ↗
45. H. Mehrer: Diffusion in Solid Metals and Alloys, Springer-Verlag, New York, NY, 1990.10.1007/b37801 ↗
46. E.A. Brandes and G.B. Brook: Smithells Metals Reference Book, 7th ed., Butterworth-Heinemann Ltd., Oxford, UK, 1992.
47. R. Kirchheim: Acta Mater., 2002, vol. 50, no. 2, pp. 413-19.10.1016/S1359-6454(01)00338-X ↗
48. H.J. Höfler, R. Tao, L. Kim, R.S. Averback, and C.J. Altstetter: Nanostruct. Mater., 1995, vol. 6, nos. 5-8, pp. 901-04.10.1016/0965-9773(95)00205-7 ↗