journal article·2022-02Open access

A Scale-up Study on Chemical Segregation and the Effects on Tensile Properties in Two Medium Mn Steel Castings

T. W. J. Kwok, C. Slater, X. Xu, C. Davis, D. Dye

Abstract

Abstract Two ingots weighing 400 g and 5 kg with nominal compositions of Fe–8Mn–4Al–2Si–0.5C–0.07V–0.05Sn were produced to investigate the effect of processing variables on microstructure development. The larger casting has a cooling rate more representative of commercial production and provides an understanding of the potential challenges arising from casting-related segregation during efforts to scale up medium Mn steels, while the smaller casting has a high cooling rate and different segregation pattern. Sections from both ingots were homogenized at 1250 $$\circ $$C for various times to study the degree of chemical homogeneity and $$\delta $$-ferrite dissolution. Within 2 hours, the Mn segregation range (max–min) decreased from 8.0 to 1.7 wt pct in the 400 g ingot and from 6.2 to 1.5 wt pct in the 5 kg ingot. Some $$\delta $$-ferrite also remained untransformed after 2 hours in both ingots but with the 5 kg ingot showing nearly three times more than the 400 g ingot. Micress modeling was carried out, and good agreement was seen between predicted and measured segregation levels and distribution. After thermomechanical processing, it was found that the coarse untransformed $$\delta $$-ferrite in the 5 kg ingot turned into coarse $$\delta $$-ferrite stringers in the finished product, resulting in a slight decrease in yield strength. Nevertheless, rolled strips from both ingots showed $$>900$$ MPa yield strength, $$>1100$$ MPa tensile strength, and $$>40$$ pct elongation with $$<10$$ pct difference in strength and no change in ductility when compared to a fully homogenized sample.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. V. Savic, L. Hector, H. Singh, M. Paramasuwom, U. Basu, A. Basudhar, N. Stander, SAE Int. J. Mater. Manuf. 11, 303–13 (2018)10.4271/2018-01-1026 ↗
2. C.F. Redeker, D. Rohrberg, J. Schöttler, J. Kroos, and K.H. Spitzer: 2nd CSM-VDEh-Seminar on Metallurgical Fundamentals, 2007.
3. M. Bausch, G. Frommeyer, H. Hofmann, E. Balichev, M. Soler, M. Didier, and L. Samek: Ultra High-Strength and Ductile FeMnAlC Light-Weight Steels, Technical Report, Luxembourg, 2013.
4. W. Bleck, K. Phiu-on, C. Heering, G. Hirt, Steel Res. Int. 78, 536–45 (2007)10.1002/srin.200706245 ↗
5. B. Wietbrock, M. Bambach, S. Seuren, G. Hirt, Mater. Sci. Forum 638–642, 3134–39 (2010)10.4028/www.scientific.net/MSF.638-642.3134 ↗
6. R. Rana, Mater. Sci. Technol. 35, 2039–44 (2019)10.1080/02670836.2019.1673971 ↗
7. J. Hidalgo, C. Celada-Casero, M.J. Santofimia, Mater. Sci. Eng. A 754, 766–77 (2019)10.1016/j.msea.2019.03.055 ↗
8. J. Liang, Z. Zhao, D. Tang, N. Ye, S. Yang, W. Liu, Mater. Sci. Eng. A 711, 175–81 (2018)10.1016/j.msea.2017.11.046 ↗
9. T.W.J. Kwok, K.M. Rahman, X. Xu, I. Bantounas, J.F. Kelleher, S. Daswari, T. Alam, R. Banerjee, and D. Dye, Mater. Sci. Eng. A 782, 139258 (2020)10.1016/j.msea.2020.139258 ↗
10. S. Lee, B.C. De Cooman, Metall. Mater. Trans. A 45A, 6039–52 (2014)10.1007/s11661-014-2540-6 ↗
11. H. Wang, Y. Zhang, R. Ran, Y. Wang, J. Kang, Y. Li, R.D. Misra, G. Yuan, G. Wang, Mater. Sci. Technol. 35, 1227–38 (2019)10.1080/02670836.2019.1618620 ↗
12. B.K. Panigrahi, Bull. Mater. Sci. 24, 361–71 (2001)10.1007/BF02708632 ↗
13. P.J.C. Vázquez, J.S. Pacheco-Cedeño, M.O. Ramos-Azpeitia, P. Garnica-González, V. Garibay-Febles, J. Moreno-Palmerin, J.J. de Cruz-Rivera, and J.L. Hernández-Rivera, Metals 10, pp. 206 (2020).10.3390/met10020206 ↗
14. Y. Choi, D.W. Suh, H.K. Bhadeshia, Proc. R. Soc. A 468, 2904–14 (2012)10.1098/rspa.2012.0082 ↗
15. B. Sun, F. Fazeli, C. Scott, N. Brodusch, R. Gauvin, S. Yue, Acta Mater. 148, 249–62 (2018)10.1016/j.actamat.2018.02.005 ↗
16. H. Choi, S. Lee, J. Lee, F. Barlat, B.C. De Cooman, Mater. Sci. Eng. A 687, 200–10 (2017)10.1016/j.msea.2017.01.055 ↗
17. Z.P. Hu, Y.B. Xu, Y. Zou, R.D. Misra, D.T. Han, S.Q. Chen, D.Y. Hou, Mater. Sci. Eng. A 720, 1–10 (2018)10.1016/j.msea.2018.02.052 ↗
18. B. Sun, F. Fazeli, C. Scott, X. Yan, Z. Liu, X. Qin, S. Yue, Scripta Mater. 130, 49–53 (2017)10.1016/j.scriptamat.2016.11.009 ↗
19. B. Sun, D. Palanisamy, D. Ponge, B. Gault, F. Fazeli, C. Scott, S. Yue, D. Raabe, Acta Mater. 164, 683–96 (2019)10.1016/j.actamat.2018.11.029 ↗
20. M.T. Kim, T.M. Park, K.H. Baik, W.S. Choi, P.P. Choi, J. Han, Acta Mater. 164, 122–134 (2019)10.1016/j.actamat.2018.10.043 ↗
21. T.W.J. Kwok, P. Gong, X. Xu, J. Nutter, W.M. Rainforth, and D. Dye (2021). arXiv:2103.10782 [cond-mat.mtrl-sci].
22. Y. Zhu, C. Slater, S. Connolly, D. Farrugia, and C. Davis, Ironmak. Steelmak. 48, 493–504 (2021)10.1080/03019233.2021.1880036 ↗
23. M. Ganesan, D. Dye, P.D. Lee, Metall. Mater. Trans. A 36A, 2191–2204 (2005)10.1007/s11661-005-0338-2 ↗
24. Z.C. Li, X.J. Li, Y.J. Mou, R.D. Misra, H. Ding, L.F. He, H.P. Li, Mater. Sci. Technol. 36, 1308–17 (2020)10.1080/02670836.2020.1777650 ↗
25. S. Lee, B.C. De Cooman, Metall. Mater. Trans. A 44A, 5018–24 (2013)10.1007/s11661-013-1860-2 ↗
26. H. Farahani, W. Xu, S. van der Zwaag, Metall. Mater. Trans. A 46A, 4978–85 (2015)10.1007/s11661-015-3081-3 ↗
27. E. Vandersluis, C. Ravindran, Metallogr. Microstruct. Anal. 6, 89–94 (2017)10.1007/s13632-016-0331-8 ↗
28. D.N. Hanlon, S.M. Van Bohemen, S. Celotto, Mater. Sci. Technol. 31, 385–88 (2015)10.1179/1743284714Y.0000000707 ↗
29. C. Slater, C. Davis, Metall. Mater. Trans. B 51B, 2532–41 (2020)10.1007/s11663-020-01964-z ↗
30. A. Saeed-Akbari, J. Imlau, U. Prahl, W. Bleck, Metall. Mater. Trans. A 40A, 3076–90 (2009)10.1007/s11661-009-0050-8 ↗
31. J. Reitz, B. Wietbrock, S. Richter, S. Hoffmann, G. Hirt, B. Friedrich, Adv. Eng. Mater. 13, 395–99 (2011)10.1002/adem.201000322 ↗