journal article·2021-12Open access

High Strain Rate Deformation Behavior and Recrystallization of Alloy 718

Marie Anna Moretti, Biswajit Dalai, Paul Åkerström, Corinne Arvieu, Dimitri Jacquin, Eric Lacoste, Lars-Erik Lindgren

Abstract

Abstract To study the deformation behavior and recrystallization of alloy 718 in annealed and aged state, compression tests were performed using Split-Hopkinson pressure bar (SHPB) at high strain rates (1000 to 4000 s−1), for temperatures between 20$$^\circ $$C and 1100$$^\circ $$C (293 K to 1373 K). Optical microscope (OM) and electron back-scatter diffraction (EBSD) technique were employed to characterize the microstructural evolution of the alloy. The stress–strain curves show that the flow stress level decreases with increasing temperature and decreasing strain rate. In addition, up to 1000$$^\circ $$C, the aged material presents higher strength and is more resistant to deformation than the annealed one, with a yield strength around 400 MPa higher. For both states, dynamic and meta-dynamic recrystallization occurred when the material is deformed at 1000$$^\circ $$C and 1100$$^\circ $$C, leading to a refinement of the microstructure. As necklace structures were identified, discontinuous recrystallization is considered to be the main recrystallization mechanism. The recrystallization kinetics is faster for higher temperatures, as the fraction of recrystallized grains is higher and the average recrystallized grain size is larger after deformation at 1100$$^\circ $$C than after deformation at 1000$$^\circ $$C.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, A.D. Rollett, Mater. Sci. Eng. A 238, 219–74 (1997)10.1016/S0921-5093(97)00424-3 ↗
2. A. Krawczyk, A. Łukaszek-Sołek, T. Śleboda, P. Bała, S. Bednarek, and M. Wojtaszek: Archiv. Metall. Mater., 2012, 57, pp. 593–603.10.2478/v10172-012-0063-y ↗
3. Y.S. Na, J.T. Yeom, N.K. Park, J.Y. Lee, Metals Mater. Int. 9, 15–19 (2003)10.1007/BF03027224 ↗
4. R. Damodaram, S.G.S. Raman, K.P. Rao, Mater. Sci. Eng. A 560, 781–86 (2013)10.1016/j.msea.2012.10.035 ↗
5. F.C. Liu, T.W. Nelson, Mater. Charact. 140, 39–44 (2018)10.1016/j.matchar.2018.03.035 ↗
6. P.C. Yadav, S. Sahu, A. Subramaniam, S. Shekhar, Mater. Sci. Eng. A 715, 295–306 (2018)10.1016/j.msea.2018.01.007 ↗
7. X.P. Ren, Z.Q. Liu, Int. J. Miner. Metall. Mater. 25, 937–49 (2018)10.1007/s12613-018-1643-2 ↗
8. F. Jafarian, S. Masoudi, H. Soleimani, D. Umbrello, Mater. Manuf. Process. 33, 1020–29 (2018)10.1080/10426914.2018.1424907 ↗
9. M. Azarbarmas, M. Aghaie-Khafri, J.M. Cabrera, J. Calvo, Mater. Des. 94, 28–38 (2016)10.1016/j.matdes.2015.12.157 ↗
10. M. Azarbarmas, M. Aghaie-Khafri, J.M. Cabrera, J. Calvo, Mater. Sci. Eng. A 678, 137–52 (2016)10.1016/j.msea.2016.09.100 ↗
11. Y. Wang, W.Z. Shao, L. Zhen, X.M. Zhang, Mater. Sci. Eng. A 486, 321–32 (2008)10.1016/j.msea.2007.09.008 ↗
12. F. Montheillet, J.P. Thomas, In: Metallic Materials with High Structural Efficiency, ed. by O.N. Senkov, D.B. Miracle, S.A. Firstov, Kluwer Academic Publishers, pp. 357–68 (2004)
13. F.L. Sui, L.X. Xu, L.Q. Chen, X.H. Liu, J. Mater. Process. Technol. 211, 433–40 (2011)10.1016/j.jmatprotec.2010.10.015 ↗
14. Y.B. Tan, Y.H. Ma, F. Zhao, J. Alloys Compd. 741, 85–96 (2018)10.1016/j.jallcom.2017.12.265 ↗
15. F. Chen, J. Liu, H. Ou, B. Lu, Z. Cui, H. Long, Mater. Sci. Eng. A 642, 279–87 (2015)10.1016/j.msea.2015.06.093 ↗
16. J.P. Thomas, E. Bauchet, C. Dumont, and F. Montheillet: Proceedings of the International Symposium on Superalloys, 2004, pp. 959–68.10.7449/2004/Superalloys_2004_959_968 ↗
17. H. Yuan and W.C. Liu: Mater. Sci. Eng. A, 2005, vol. 408, pp. 281–89.10.1016/j.msea.2005.08.126 ↗
18. A. Iturbe, E. Giraud, E. Hormaetxe, A. Garay, G. Germain, K. Ostolaza, P.J. Arrazola, Mater. Sci. Eng. A 682, 441–53 (2017)10.1016/j.msea.2016.11.054 ↗
19. W.S. Lee, C.F. Lin, T.H. Chen, H.W. Chen, Mater. Sci. Eng. A 528, 6279–86 (2011)10.1016/j.msea.2011.04.079 ↗
20. W.S. Lee, C.F. Lin, T.H. Chen, H.W. Chen, Mater. Trans. 52, 1734–40 (2011)10.2320/matertrans.M2011130 ↗
21. W.S. Lee, C.F. Lin, T.H. Chen, C.S. Huang, Mater. Trans. 53, 1758–64 (2012)10.2320/matertrans.M2012073 ↗
22. X. Wang, C. Huang, B. Zou, H. Liu, H. Zhu, J. Wang, Mater. Sci. Eng. A 580, 385–90 (2013)10.1016/j.msea.2013.05.062 ↗
23. T. Sjöberg, K.G. Sundin, M. Oldenburg, in Computational Plasticity XII: Fundamentals and Applications. COMPLAS , pp. 790–800 (2013)
24. T. Sjöberg, J. Kajberg, M. Oldenburg, Eng. Fract. Mech. 178, 231–42 (2017)10.1016/j.engfracmech.2017.04.036 ↗
25. J. Johansson, C. Persson, H. Lai, M. Hörnqvist Colliander, Mater. Sci. Eng. A 662, 363–72 (2016)10.1016/j.msea.2016.03.080 ↗
26. L.Y. Wei, S. Azadian, R. Warren, K. Wei, In: 52nd annual meeting on Scandinavian Society for Electron Microscopy, pp. 208–09 (2001)
27. J.M. Pereira, B.A. Lerch, Int. J. Impact Eng. 25, 715–33 (2001)10.1016/S0734-743X(01)00018-5 ↗
28. Special Metals. INCONEL alloy 718 Datasheet 2007
29. Maher. Alloy 718 Data Sheet (2020)
30. J. Kajberg, K.G. Sundin, J. Mater. Process. Technol. 213, 522–31 (2013)10.1016/j.jmatprotec.2012.11.008 ↗
31. G.T. Gray, ASM Handbook 8, 462–76 (2000)
32. J.I. Goldstein, D.E. Newbury, J.R. Michael, N.W. Ritchie, J.H.J. Scott, D.C. Joy, Scanning Electron Microscopy and X-Ray Microanalysis, 4th edn. Springer, New York (2017)
33. M. Urdanpilleta, J.M. Martínez-Esnaola, J.G. Sevillano, Mater. Trans. 46, 1711–19 (2005)10.2320/matertrans.46.1711 ↗
34. S.L. Yan, H. Yang, H.W. Li, X. Yao, J. Alloys Compd. 688, 776–86 (2016)10.1016/j.jallcom.2016.07.077 ↗
35. S. Azadian, Aspects of Precipitation in the Alloy Inconel 718. (Luleå University of Technology). (Ph.D. thesis) (2004)10.1016/j.matchar.2004.07.004 ↗
36. M. Fisk, J.C. Ion, L.E. Lindgren, Comput. Mater. Sci. 82, 531–39 (2014)10.1016/j.commatsci.2013.10.007 ↗
37. G. Asala, J. Andersson, O.A. Ojo, Philos. Mag. 99, 419–37 (2019)10.1080/14786435.2018.1540891 ↗
38. S.I. Wright, M.M. Nowell, D.P. Field, Micros. Microanal. 17, 316–29 (2011)10.1017/S1431927611000055 ↗
39. J.J. Jonas, Mater. Sci. Eng. A 184, 155–65 (1994)10.1016/0921-5093(94)91028-6 ↗
40. R.P. Guest, S. Tin, In: Proceedings of the International Symposium on Superalloys and Various Derivatives, pp. 373–83 (2005)10.7449/2005/Superalloys_2005_373_383 ↗
41. A. Nicolaÿ, J.M. Franchet, J. Cormier, H. Mansour, M. de Graef, A. Seret, N. Bozzolo, J. Microsc. 273, 135–47 (2019)10.1111/jmi.12769 ↗
42. F. Montheillet, In: Moving Interfaces in Crystalline Solids. ed. by F.D. Fischer, Springer, New York, pp. 203–56 (2004)
43. K. Huang, R. Logé, Mater. Des. 111, 548–74 (2016)10.1016/j.matdes.2016.09.012 ↗
44. F. Montheillet: Techniques de l’Ingenieur - M3031 (2009).
45. M. Sundararaman, P. Mukhopadhyay, S. Banerjee, Acta Metall. 36, 847–64 (1988)10.1016/0001-6160(88)90139-3 ↗
46. D. Ponge, G. Gottstein, Acta Mater. 46, 69–80 (1998)10.1016/S1359-6454(97)00233-4 ↗
47. H.T. Lee and W.H. Hou: Mater. Sci. Eng. A, 2012, vol. 555, pp. 13–20.10.1016/j.msea.2012.06.027 ↗
48. L.X. Zhou, T.N. Baker, Mater. Sci. Eng. A 177, 1–9 (1994)10.1016/0921-5093(94)90472-3 ↗