The Role of Phase Hardness Differential on the Non-uniform Elongation of a Ferrite-Martensite Dual Phase Steel
Source abstract
Abstract
This study involved a commercial hot-rolled dual-phase (DP) steel consisting of martensite (~10 pct) and ferrite phases. The harder lath martensite was located at the grain boundaries and triple junctions of the equiaxed ferrite grains. Tempering and high-pressure torsion (HPT) were used to alter the phase hardness differential ∆H (where $$ \Delta H = H_{\text{Martensite}} - H_{\text{Ferrite}} $$ ) of the DP. The relationship between ∆H and non-uniform elongation, eNU, or post-necking ductility under tensile deformation, was then explored. Tempering softened predominantly the martensite, while HPT increased the ferrite hardness. Both led to a reduction in ∆H. A drop in ∆H in the tempered DP resulted in a steady increase and eventual saturation in eNU. On the other hand, a ∆H decrease in the HPT specimens showed an initial increase in eNU followed by a drop. Strain analysis, with optical digital image correlation during tensile deformation of the tempered DP samples, clearly related the formation of strain localization with ∆H. In particular, severity of strain localization during necking scaled linearly with ∆H. This study thus brought out a potential relationship among the phase hardness differential (∆H), severity of strain localizations and post-necking ductility (eNU).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. 1 B. Verlinden, I. Samajdar, and R.D. Doherty: Thermo-Mechanical Processing of Metallic Materials, 1st edn., Pergamon Materials Series, Amsterdam, 2007.
2. N. Fonstein: in Automotive steels Design,Metallurgy,Processing and Applications, 2nd edn., Woodhead publishing, 2017, pp. 169–209.
3. 3 C.C. Tasan, M. Diehl, D. Yan, M. Bechtold, F. Roters, L. Schemmann, C. Zheng, N. Peranio, D. Ponge, M. Koyama, K. Tsuzaki, and D. Raabe: Annu. Rev. Mater. Res., 2015, vol. 45, pp. 391–431.10.1146/annurev-matsci-070214-021103 ↗
4. 4 M.. Rashid: Automot. Steels Des. Metall. Process. Appl., 1981, vol. 11, pp. 245–66.
5. S.K. Paul: Proc. Inst. Mech. Eng. B J. Eng. Manuf., 2018, vol. 233, pp. 2115–19.
6. 6 J.I. Yoon, J. Jung, J.G. Kim, S.S. Sohn, S. Lee, and H.S. Kim: J. Mater. Sci., 2017, vol. 52, pp. 7808–23.10.1007/s10853-017-1012-y ↗
7. 7 J.H. Kim, Y.J. Kwon, T. Lee, K.A. Lee, H.S. Kim, and C.S. Lee: Met. Mater. Int., 2018, vol. 24, pp. 187–94.10.1007/s12540-017-7288-2 ↗
8. 8 R.J. Comstock, D.K. Scherrer, and P.D. Adamczyk: J. Mater. Eng. Perform., 2006, vol. 15, pp. 675–83.10.1361/105994906X150830 ↗
9. 9 J.I. Yoon, J. Jung, H.H. Lee, G.S. Kim, and H.S. Kim: Met. Mater. Int., 2016, vol. 22, pp. 1009–14.10.1007/s12540-016-6346-5 ↗
10. 10 X. Chen, H. Jiang, Z. Cui, C. Lian, and C. Lu: Procedia Eng., 2014, vol. 81, pp. 718–23.10.1016/j.proeng.2014.10.066 ↗
11. 11 B.M. Hance: SAE Int. J. Engines, 2017, vol. 10, pp. 247–57.10.4271/2017-01-0306 ↗
12. 12 L. Chen, J.K. Kim, S.K. Kim, G.S. Kim, K.G. Chin, and B.C. De Cooman: Steel Res. Int., 2010, vol. 81, pp. 552–68.10.1002/srin.201000044 ↗
13. 13 Y. Gong, Y. Wu, M. Hua, J. Uusitalo, and A.J. DeArdo: J. Mater. Sci., 2020, vol. 55, pp. 5639–54.10.1007/s10853-020-04385-0 ↗
14. 14 L. Xu, F. Barlat, and M.G. Lee: Scr. Mater., 2012, vol. 66, pp. 1012–7.10.1016/j.scriptamat.2012.01.062 ↗
15. 15 R.D. Adamczyk and G.M. Michal: J. Appl. Metalwork., 1986, vol. 4, pp. 157–63.10.1007/BF02834379 ↗
16. 16 J. Lee, S.J. Lee, and B.C. De Cooman: Mater. Sci. Eng. A, 2012, vol. 536, pp. 231–8.10.1016/j.msea.2012.01.003 ↗
17. 17 S.K. Paul: J. Mater. Eng. Perform., 2014, vol. 23, pp. 3610–9.10.1007/s11665-014-1161-y ↗
18. 18 J.I. Yoon, J. Jung, J.H. Ryu, K. Lee, and H.S. Kim: Exp. Mech., 2017, vol. 57, pp. 1349–58.10.1007/s11340-017-0306-y ↗
19. 19 K. Wang, M. Luo, and T. Wierzbicki: Int. J. Fract., 2014, vol. 187, pp. 245–68.10.1007/s10704-014-9937-5 ↗
20. 20 A. Considere: Ann. des Ponts Chausées, 1885, vol. 9, pp. 574–605.
21. 21 N.K. Balliger and T. Gladman: Met. Sci., 1981, vol. 15, pp. 95–108.10.1179/030634581790426615 ↗
22. U.F. Kocks, A.S. Argon, and M.. Ashby: Prog. Mater. Sci., 1975, p. 1.
23. 23 U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
24. 24 A.K. Rana, S.K. Paul, and P.P. Dey: Phys. Mesomech., 2018, vol. 21, pp. 333–40.10.1134/S1029959917040070 ↗
25. 25 K. Park, M. Nishiyama, N. Nakada, T. Tsuchiyama, and S. Takaki: Mater. Sci. Eng. A, 2014, vol. 604, pp. 135–41.10.1016/j.msea.2014.02.058 ↗
26. 26 G. Avramovic-Cingara, Y. Ososkov, M.K. Jain, and D.S. Wilkinson: Mater. Sci. Eng. A, 2009, vol. 516, pp. 7–16.10.1016/j.msea.2009.03.055 ↗
27. 27 Y. Ososkov, D.S. Wilkinson, M. Jain, and T. Simpson: Zeitschrift fuer Met. Res. Adv. Tech., 2007, vol. 98, pp. 664–73.
28. 28 R. G.Davies: Metall. Trans. A, 1978, vol. 9, pp. 41–52.10.1007/BF02647169 ↗
29. 29 R.G. Davies: Metall. Trans. A, 1978, vol. 9, pp. 671–9.10.1007/BF02659924 ↗
30. 30 N. Lanzillotto and F.B. Pickering: Met. Sci., 1982, vol. 16, pp. 371–82.10.1179/030634582790427433 ↗
31. 31 J. Kang, Y. Ososkov, J.D. Embury, and D.S. Wilkinson: Scr. Mater., 2007, vol. 56, pp. 999–1002.10.1016/j.scriptamat.2007.01.031 ↗
32. 32 A.A. Sayed and S. Kheirandish: Mater. Sci. Eng. A, 2012, vol. 532, pp. 21–5.10.1016/j.msea.2011.10.056 ↗
33. 33 Q. Han, A. Asgari, P.D. Hodgson, and N. Stanford: Mater. Sci. Eng. A, 2014, vol. 611, pp. 90–9.10.1016/j.msea.2014.05.078 ↗
34. H. Li, S. Gao, Y. Tian, D. Terada, A. Shibata, and N. Tsuji: in Materials Today: Proceedings, 2015, pp. 667–71.10.1016/j.matpr.2015.07.372 ↗
35. 35 A. Hohenwarter, A. Bachmaier, B. Gludovatz, S. Scheriau, and R. Pippan: Int. J. Mater. Res., 2009, vol. 100, pp. 1653–61.10.3139/146.110224 ↗
36. 36 A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893–979.10.1016/j.pmatsci.2008.03.002 ↗
37. 37 K. Edalati and Z. Horita: Mater. Sci. Eng. A, 2016, vol. 652, pp. 325–52.10.1016/j.msea.2015.11.074 ↗
38. 38 G. Sakai, K. Nakamura, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2005, vol. 406, pp. 268–73.10.1016/j.msea.2005.06.049 ↗
39. 39 C. Xu, Z. Horita, and T.G. Langdon: Acta Mater., 2007, vol. 55, pp. 203–12.10.1016/j.actamat.2006.07.029 ↗
40. J.H. Hollomon and L.D. Jaffe: Trans. AIME, 1945, vol. 162, pp. 223–49.
41. 41 K.V.M. Krishna, P. Tripathi, V.D. Hiwarkar, P. Pant, I. Samajdar, D. Srivastava, and G.K. Dey: Scr. Mater., 2010, vol. 62, pp. 391–4.10.1016/j.scriptamat.2009.11.031 ↗
42. 42 S.K. Giri, A. Durgaprasad, K. V. Manikrishna, C.R. Anoop, S. Kundu, and I. Samajdar: Philos. Mag., 2019, vol. 99, pp. 699–717.10.1080/14786435.2018.1552030 ↗
43. 43 A. Kolhatkar, V. Karthik, G.M.S.K. Chaitanya, A. Kumar, and D. Ramchandran: J. Test. Eval., 2019, vol. 47, pp. 3417–31.10.1520/JTE20180294 ↗
44. 44 W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
45. O. Engler and V. Randle: Introduction to Texture Analysis Macrotexture,Microtexture and Orientation Mapping, 2nd edn., CRC Press, 2009.10.1201/9781420063660 ↗
46. T. Maki: in Phase transformations in steels, E. Pereloma and D. V. Edmonds, eds., 1st edn., Woodhead publishing, 2012, pp. 34–56.
47. H.K.D.H. Bhadesia and R.W.K. Honeycombe: Steels Microstructure and Properties, 3rd edn., Butterworth-Heinemann, 2006.10.1016/B978-075068084-4/50016-9 ↗
48. 48 J.A. Muñoz, O.F. Higuera, and J.M. Cabrera: Mater. Sci. Eng. A, 2017, vol. 697, pp. 24–36.10.1016/j.msea.2017.04.108 ↗
49. 49 R. Rodriguez and I. Gutierrez: Mater. Sci. Forum, 2003, vol. 426–432, pp. 4525–30.10.4028/www.scientific.net/MSF.426-432.4525 ↗
50. 50 H. Ghadbeigi, C. Pinna, and S. Celotto: Mater. Sci. Eng. A, 2013, vol. 588, pp. 420–31.10.1016/j.msea.2013.09.048 ↗
51. 51 C.C. Tasan, J.P.M. Hoefnagels, F. Roters, D. Raabe, M. Diehl, and D. Yan: Int. J. Plast., 2014, vol. 63, pp. 198–210.10.1016/j.ijplas.2014.06.004 ↗
52. 52 A. Joarder, J.N. Jha, S.N. Ojha, and D.S. Sarma: Mater. Charact., 1990, vol. 25, pp. 199–209.10.1016/1044-5803(90)90010-H ↗
53. G. Krauss: in Steels processing,structure and performance, ASM International, 2005, pp. 55–82.
54. G. Krauss: in Phase transformations in steels, E. Pereloma and D. V. Edmonds, eds., 1st edn., Woodhead publishing, 2012, pp. 126–45.
55. 55 L. Cheng, C.M. Brakman, B.M. Korevaar, and E.J. Mittemeijer: Metall. Trans. A, 1988, vol. 19, pp. 2415–26.10.1007/BF02645469 ↗
56. 56 G.R. Speich and W.C. Leslie: Metall. Trans., 1972, vol. 3, pp. 1043–54.10.1007/BF02642436 ↗
57. 57 G.R. Speich, A.J. Schwoeble, and G.P. Huffman: Metall. Trans. A, 1983, vol. 14, pp. 1079–87.10.1007/BF02659856 ↗
58. 58 M.R. Suresh, I. Samajdar, A. Ingle, N.B. Ballal, P.K. Rao, and P.P. Sinha: Ironmak. Steelmak., 2003, vol. 30, pp. 379–84.10.1179/030192303225004097 ↗
59. 59 M. Calcagnotto, Y. Adachi, D. Ponge, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 658–70.10.1016/j.actamat.2010.10.002 ↗
60. P.G. Shewmon: Diffusion in Solids, 2nd edn., McGraw-Hill Inc., 1963.
61. 61 A.E. Lord and D.N. Beshers: Acta Met., 1966, vol. 14, pp. 1659–72.10.1016/0001-6160(66)90018-6 ↗
62. 62 G.E. Dieter: Mechanical Metallurgy., 3rd edn., McGraw-Hill Inc., London, 1988.
63. 63 J. Kadkhodapour, A. Butz, S. Ziaei-Rad, and S. Schmauder: Int. J. Plast., 2011, vol. 27, pp. 1103–25.10.1016/j.ijplas.2010.12.001 ↗
64. 64 J. Kadkhodapour, A. Butz, and S. Ziaei Rad: Acta Mater., 2011, vol. 59, pp. 2575–88.10.1016/j.actamat.2010.12.039 ↗
65. 65 I.B. Timokhina, A. Medvedev, and R. Lapovok: Mater. Sci. Eng. A, 2014, vol. 593, pp. 163–9.10.1016/j.msea.2013.11.013 ↗
66. 66 A. Mishra, V. Richard, F. Grégori, R.J. Asaro, and M.A. Meyers: Mater. Sci. Eng. A, 2005, vol. 410–411, pp. 290–8.10.1016/j.msea.2005.08.201 ↗
67. 67 B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–19.10.1016/0956-7151(92)90296-Q ↗
68. 68 D. Kuhlmann-Wilsdorf: Metall. Trans., 1970, vol. 1, pp. 3173–9.10.1007/BF03038434 ↗
69. 69 M.R. Staker and D.L. Holt: Acta Met., 1972, vol. 20, pp. 569–79.10.1016/0001-6160(72)90012-0 ↗
70. P. Landau, R.Z. Shneck, G. Makov, and A. Venkert: in IOP Conference Series: Materials Science and Engineering, vol. 3, 2008.10.1088/1757-899X/3/1/012004 ↗
71. 71 E.O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, pp. 742–7.10.1088/0370-1301/64/9/302 ↗
72. 72 N.J. Petch: J. Iron Steel Inst., 1982, vol. 174, p. 25.
73. 73 Z. Jiang, Z. Guan, and J. Lian: Mater. Sci. Eng. A, 1995, vol. 190, pp. 55–64.10.1016/0921-5093(94)09594-M ↗
74. S. Mohd Yusuf, Y. Chen, S. Yang, and N. Gao: Mater. Charact., 2020, vol. 159, p. 110012.10.1016/j.matchar.2019.110012 ↗
75. 75 R. Valiev: Nat. Mater., 2004, vol. 3, pp. 511–6.10.1038/nmat1180 ↗
76. A. Alaie, J. Kadkhodapour, S. Ziaei Rad, M. Asadi Asadabad, and S. Schmauder: Mater. Sci. Eng. A, 2015, vol. 623, pp. 133–44.10.1016/j.msea.2014.11.042 ↗