Effect of Ageing on Microstructure, Mechanical Properties and Creep Behavior of Alloy 740H
Source abstract
Abstract
A study on the mechanical property changes and the creep behavior of a Ni-based alloy 740H on ageing at 800 °C for 10250 hours is conducted. Microstructural characterization reveals that the alloy initially contains fine γ′ phase and carbide precipitates within grains and at grain boundaries. Ageing does not affect the grain size but coarsens the γ′ phase and facilitates further precipitation of carbides at grain boundaries, which gradually form a continuous network. This significantly deteriorates the mechanical properties in ambient conditions with marked reductions in the impact energy and yield strength. The strength of the aged alloy further reduces at 710 °C. In contrast, ageing appears to have insignificant influence on the ductility, which is > 30 pct at both testing temperatures. Ageing also reduces the creep strength of the alloy and accelerates the creep rate. The creep stress exponent was found to increase from 6.7 to 11.2 after ageing, suggesting a transition in the deformation mechanism. The observed reductions in yield strength, impact toughness and creep strength are attributed to the coarsening of the γ′ precipitate, formation of network carbides at grain boundaries and formation of γ′ precipitate-free zone adjacent to grain boundary carbide network. This γ′ precipitate-free zone also weakens the grain boundary and facilitates grain boundary sliding at higher temperatures. However, under quasi-static conditions, γ′ precipitate-free zone undergoes plastic deformation and helps in preserving the ductility of the aged alloy. Implications of these changes are discussed in the context of high-temperature structural applications, such as in power plants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. A.D. Gianfrancesco: Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, Woodhead Publishing Series in Energy - 104, Elsevier, 2016.
2. A. Mathur, O.P. Bhutani, T. Jayakumar, D.K. Dubey and S.C. Chetal: India’s national A-USC mission—Plan and progress, Proceedings from the Seventh International Conference on Advances in Materials Technology for Fossil Power Plants, Materials Park, OH, ASM International, 2013, pp. 53–59.10.31399/asm.cp.am-epri-2013p0053 ↗
3. Chetal SC, Jayakumar T, Bhaduri AK (2015) Proc. Indian Natl. Sci. Acad. 81(4), 739-754.10.16943/ptinsa/2015/v81i4/48294 ↗
4. A. Shilbi: Coal Power Plant Materials and Life Assessment – Developments and Applications. Woodhead Publishing Series in Energy, Amsterdam, 2014.
5. S.J. Patel, J.J.D. Barbadillo, B.A. Baker and R.D. Gollihue: Procedia Eng., 2013, Vol. 55, pp. 246–252.10.1016/j.proeng.2013.03.250 ↗
6. M.C. Hardy, M. Detrois, E.T. McDevitt, C. Argyrakis, V. Saraf, P.D. Jablonski, J.A. Hawk, R.C. Buckingham, H.S. Kitaguchi, and S. Tin: Metall. Mater. Trans. A, 2020, vol. 51, pp. 2626–2650.10.1007/s11661-020-05773-6 ↗
7. F. Abe: Engineering, 2015, vol. 1, pp. 211–24.10.15302/J-ENG-2015031 ↗
8. J.J. deBarbadillo: INCONEL Alloy 740H, in Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, Di Gianfrancesco, ed., Woodhead Publishing, 2017, pp. 469–10.10.1016/B978-0-08-100552-1.00014-2 ↗
9. M. Fukuda, Y. Yagi, H. Fukutomi, S. Nishinoiri, K. Sato, T. Nishii, K. Nishimaki, T. Takano, H. Aoki, Y. Okuma, T. Furukawa, M. Shimada, N. Saito, K. Hashimoto, M. Kitamura, E. Saito, H. Semba, Y. Matsubara, K. Takahashi, T. Takahashi and T. Surga: and X. Li: 700°C A-USC Technology Development in Japan; Proceedings of Joint EPRI – 123HiMT International Conference on Advances in High Temperature Materials, ASM International, USA, 2019. pp. 1487–99.
10. H. Hack, R. Purgert and R. Schrecengost: Update on United States Advanced Ultra-Supercritical Component Test Project for 760°C Steam Conditions; Proceedings of Joint EPRI – 123HiMT International Conference on Advances in High Temperature Materials, ASM International, USA, 2019. pp. 1476–86.10.31399/asm.cp.am-epri-2019p1476 ↗
11. R.G. Faulkner, S. Vujic, F.D. Martino and S.C. Hogg: Mater. Sci. Technol., 2017, Vol. 33, pp. 121–128.10.1080/02670836.2016.1164959 ↗
12. J.P. Shingledecker, N.D. Evans and G.M. Pharr: Mater. Sci. Eng. A, 2013, Vol. 578, pp. 277–286.10.1016/j.msea.2013.04.087 ↗
13. N.D. Evans, P.J. Maziasz, R.W. Swindeman and G.D. Smith: Scr. Mater., 2004, Vol. 51, pp. 503–507.10.1016/j.scriptamat.2004.05.047 ↗
14. J.P. Shingledecker and G.M. Pharr: Metall. Mater. Trans. A, 2012, Vol. 43, pp. 1902–1910.10.1007/s11661-011-1013-4 ↗
15. S.F.D. Martino, R.G. Faulkner and S.C. Hogg: Mater. Sci. Technol., 2017, Vol. 33, pp. 40–48.10.1080/02670836.2016.1159002 ↗
16. C.J. Cowen, P.E. Danielson and P.D. Jablonski: J. Mater. Eng. Perform., 2011, Vol. 20, pp. 1078–1083.10.1007/s11665-010-9731-0 ↗
17. J.H. Oh, I.C. Choi, Y.J. Kim, B.G. Yoo, J. Jang: Mater. Sci. Eng. A, 2011, Vol. 528, pp. 6121–6127.10.1016/j.msea.2011.03.115 ↗
18. G.S. Shin, J.Y. Yun, M.C. Park and S.J. Kim: Mater. Charact., 2014, Vol. 95, pp. 180–186.10.1016/j.matchar.2014.06.019 ↗
19. S. Zhao, X. Xie, G.D. Smith, and S.J. Patel: Mater. Chem. Phys., 2005, vol. 90, pp. 275–81.10.1016/j.matchemphys.2004.04.006 ↗
20. S. Zhao, X. Xie, G.D. Smith and S.J. Patel: Mater. Des., 2006, Vol. 27, pp. 1120–1127.10.1016/j.matdes.2005.03.015 ↗
21. S.J. Patel: Acta Metall. Sin. 2005, Vol. 18 (4), pp. 479-488.
22. J.P. Shingledecker and G.M. Pharr: J. Mater. Eng. Perform., 2013, Vol. 22, pp. 454–462.10.1007/s11665-012-0274-4 ↗
23. M. Detrois, K.A. Rozman, P.D. Jablonski, and J.A. Hawk: Metall. Mater. Trans. A, 2020. https://doi.org/10.1007/s11661-020-05822-0.10.1007/s11661-020-05822-0 ↗
24. Online document: Inconel® Alloy 740H: A Superalloy Specifically Designed for Advanced Ultra Supercritical Power Generation. (PCC Energy Group, 2014), http://www.specialmetals.com/assets/smc/documents/alloys/inconel/inconel-alloy-740-h.pdf, Accessed 24 June 2019.
25. Case 2702-2: Ni-25Cr-20Co Material, Code Cases: Boilers and Pressure Vessels, The American Society of Mechanical Engineers, 2015.
26. Y. Guo, T.J. Li, C.X. Wang, S.F. Hou and B.H. Wang: Trans. Nonferrous Met. Soc. China, 2016, Vol. 26, pp. 1598–1606.10.1016/S1003-6326(16)64266-8 ↗
27. C. Yan, L. Zhengdong, A. Godfrey, L. Wei and W. Yuqing: Mater. Sci. Eng. A, 2014, Vol. 589, pp. 153–164.10.1016/j.msea.2013.09.076 ↗
28. A. Zieliński, M. Sroka, and T. Dudziak: Materials 2018, 11, 1-13.10.3390/ma11112130 ↗
29. M. Sroka, A. Zielinski, A. Sliwa, M. Nabiałek, Z. Kania-Pifczyk, and I. Vasková: Acta Phys. Pol. A, 2020, vol. 137, pp. 355–60.10.12693/APhysPolA.137.355 ↗
30. H. Jiang, J. Dong, and M. Zhang: J. Alloys Compd., 2019, vol. 782, pp. 323–333.10.1016/j.jallcom.2018.12.211 ↗
31. R. Viswanathan: Damage Mechanisms and Life Assessment of High Temperature Components, ASM International, Metals Park, Ohio, 1989, pp. 61-71.10.31399/asm.tb.dmlahtc.9781627083409 ↗
32. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw Hill Book Company, Pennsylvania, 1988, pp. 441-464.
33. E23-16b, Standard test methods for notched bar impact testing of metallic materials, American Society for Testing and Materials International, 2016, 1–26.
34. E8/E8M-13a, Standard test methods for tension testing of metallic materials, American Society for Testing and Materials International, 2013, 1–28.
35. E139-11, Standard test methods for conducting creep, creep-rupture, and stress-rupture tests of metallic materials, American Society for Testing and Materials International, 2011, 1–14.
36. S.Q. Zhao, Y. Jiang, J.X. Dong and X.S. Xie: Acta Metall. Sin. 2006, 19, 425–431.10.1016/S1006-7191(06)62083-8 ↗
37. K.A. Unocic, J.P. Shingledecker and P.F. Tortorelli: JOM, 2014, Vol. 66, pp. 2535-2542.10.1007/s11837-014-1208-4 ↗
38. S.Zhao, X. Xie, G.D. Smith and S.J. Patel: Mater. Sci. Eng. A, 2003, Vol. 355, pp. 96–105.10.1016/S0921-5093(03)00051-0 ↗
39. D.H. Bechetti, J.N. DuPont, J.J.D. Barbadillo, B.A. Baker and M. Watanabe: Metall. Mater. Trans. A, 2015, Vol. 46, pp. 739–755.10.1007/s11661-014-2682-6 ↗
40. J.P. Shingledecker, R.W. Swindeman, Q. Wu and V.K. Vasudevan: Strengthening Issues for High-Temperature Ni-Based Alloys for Use in USC Steam Cycles; Proceedings of 19th Annual Conference on Fossil Energy Materials, NETL, USA, 2005.
41. S. Purushothaman and J.K. Tien: Acta Metall., 1978, vol. 26, pp. 519–528.10.1016/0001-6160(78)90104-9 ↗
42. J.K. Benz, L.J. Carroll, J.K. Wright, R.N. Wright, and T.M. Lillo: Metall. Mater. Trans. A, 2014, vol. 45, pp. 3010–3022.10.1007/s11661-014-2244-y ↗
43. V.C. Nardone and J.R. Strife: Metall. Trans. A, 1987, vol. 18, pp. 109–114.10.1007/BF02646227 ↗
44. C. Nardone and J.K. Tien: Scr. Metall., 1986, vol. 20, pp. 797–802.10.1016/0036-9748(86)90443-6 ↗
45. Z.Y. Ma and S.C. Tjong: Compos. Sci. Technol., 2001, vol. 61, pp. 771–786.10.1016/S0266-3538(01)00018-5 ↗
46. J. Čadek, H. Oikawa, and V. Šustek: Mater. Sci. Eng. A, 1995, vol. 190, pp. 9–23.10.1016/0921-5093(94)09605-V ↗
47. D. Raynor and J. M. Silcoc: Met. Sci. J., 1970, Vol. 4, pp. 121-130.10.1179/msc.1970.4.1.121 ↗