Microstructure–Property Relationship in Cold-Drawn Pearlitic Steel Wires
Source abstract
Abstract
The difficulty in predicting flow stress of a cold-drawn pearlitic steel wire arises from the complex microstructural transformations induced by cold drawing. For assessing properly the different contributions to strengthening, four quantities must first be expressed as a function of strain $$ \varepsilon $$: (i) residual volume fraction of cementite; (ii) interlamellar spacing $$ \lambda $$, taking initial orientation of cementite lamellae into account; (iii) carbon concentration in ferrite deduced from strain-induced carbon partitioning between ferrite and cementite; and (iv) density of dislocations. Combination of these four expressions shows that cementite is able to significantly deviate from stoichiometry before dissolving, and that dislocations alone in ferrite are not able to control the decomposition of cementite unless $$ \varepsilon $$ reaches 4, implying involvement of solid solution. At $$ \varepsilon > 1.5 $$, when all lamellae are parallel to the wire axis and Voigt model can be applied, it is found that strain hardening is negligible, ferrite hardening by carbon in solid solution is canceled out by cementite softening and flow stress is better described by the Orowan mechanism ($$ 1/\lambda $$ dependence) than by the Hall–Petch law ($$ 1/\sqrt \lambda $$ dependence).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. [1] Y.J. Li, D. Raabe, M. Herbig, P. Choi, S. Goto, A. Kostka, H. Yarita, C. Borchers, R. Kirchheim: Phys. Rev. Lett., 2014, vol. 113, pp. 106104-5.10.1103/PhysRevLett.113.106104 ↗
2. [2] J.D. Embury, R.M. Fisher: Acta Metall., 1966, vol. 14, pp. 147-159.10.1016/0001-6160(66)90296-3 ↗
3. [3] S. Nishida, A. Yoshie, M. Imagumbai: ISIJ Int., 1998, vol. 38, pp. 177-186.10.2355/isijinternational.38.177 ↗
4. J. Gil Sevillano: Wire J. Int., 2011, vol. 44, pp. 58-70.
5. [5] A. Lamontagne, V. Massardier, X. Kleber, X. Sauvage, D. Mari: Mater. Sci. Eng. A, 2015, vol. 644A, pp. 105-113.10.1016/j.msea.2015.07.048 ↗
6. [6] X. Zhang, N. Hansen, A. Godfrey, X. Huang: Acta Mater., 2016, vol. 114, pp. 176-183.10.1016/j.actamat.2016.04.040 ↗
7. [7] V.N. Gridnev, V.G. Gavriljuk: Phys. Met., 1982, vol. 4, pp. 531-551.
8. [8] J. Languillaume, G. Kapelski, B. Baudelet: Acta Mater., 1997, vol. 45, pp. 1201-1212.10.1016/S1359-6454(96)00216-9 ↗
9. [9] G.A. Nematollahi, B. Grabowski, D. Raabe, J. Neugebauer: Acta Mater., 2016, vol. 111, pp. 321-334.10.1016/j.actamat.2016.03.052 ↗
10. [10] R.A. Johnson, G.J. Dienes, A.C. Damask: Acta Metall., 1964, vol. 12, pp. 1215-1224.10.1016/0001-6160(64)90105-1 ↗
11. [11] D. Kalish, M. Cohen: Mater. Sci. Eng., 1970, vol. 6, pp. 156-166.10.1016/0025-5416(70)90045-5 ↗
12. [12] E. Clouet, S. Garruchet, H. Nguyen, M. Perez, C.S. Becquart: Acta Mater., 2008, vol. 56, pp. 3450-3460.10.1016/j.actamat.2008.03.024 ↗
13. [13] Y.J. Li, P. Choi, C. Borchers, S. Westerkamp, S. Goto, D. Raabe, R. Kirchheim: Acta Mater., 2011, vol. 59, pp. 3965-3977.10.1016/j.actamat.2011.03.022 ↗
14. [14] X. Sauvage, J. Copreaux, F. Danoix, D. Blavette: Phil. Mag., 2000, vol. 80, pp. 781-796.10.1080/01418610008212082 ↗
15. [15] X. Sauvage, Y. Ivanisenko: J. Mater. Sci., 2007, vol. 42, pp. 1615-1621.10.1007/s10853-006-0750-z ↗
16. [16] Y.J. Li, P. Choi, C. Borchers, Y.Z. Chen, S. Goto, D. Raabe, R. Kirchheim R: Ultramicroscopy, 2011, vol. 111, pp. 628-632.10.1016/j.ultramic.2010.11.010 ↗
17. [17] L. Zhou, F. Fang, X. Zhou, Y. Tu, Z. Xie, J. Jiang: Scripta Mater., 2016, vol. 120, pp. 5-8.10.1016/j.scriptamat.2016.04.002 ↗
18. [18] R.G.A. Veiga, M. Perez, C.S. Becquart, E. Clouet, C. Domain: Acta Mater., 2011, vol. 59, pp. 6963-6974.10.1016/j.actamat.2011.07.048 ↗
19. [19] A. Lamontagne, V. Massardier, X. Sauvage, Χ. Kleber, D. Mari: Mater. Sci. Eng. A, 2016, vol. 667A, pp. 115-124.10.1016/j.msea.2016.04.091 ↗
20. [20] A. Taniyama, T. Takayama, M. Arai, T. Hamada: Scripta Mater., 2004, vol. 51, pp. 53-58.10.1016/j.scriptamat.2004.03.018 ↗
21. [21] A. Phelippeau, S. Pommier, I. Zakharchenko, R. Levy-Tubiana, T. Tsakalakos, M. Clavel, M. Croft, Z. Zhong, C. Prioul: Fatigue Fract. Engng Mater. Struct., 2006, vol. 29, pp. 255-265.10.1111/j.1460-2695.2005.00987.x ↗
22. [22] S. Djaziri, Y. Li, G.A. Nematollahi, B. Grabowski, S. Goto, C. Kirchlechner, A. Kostka, S. Doyle, J. Neugebauer, D. Raabe, G. Dehm: Adv Mater., 2016, vol. 28, pp. 7753-7757.10.1002/adma.201601526 ↗
23. [23] P. Maugis: Acta Mater., 2018, vol. 158, pp. 454-465.10.1016/j.actamat.2018.08.001 ↗
24. [24] Y.Z. Chen, G. Csiszár, J. Cizek, C. Borchers, T. Ungár, S. Goto, R. Kirchheim: Scripta Mater., 2011, vol. 64, pp. 390-393.10.1016/j.scriptamat.2010.10.039 ↗
25. [25] Y.Z. Chen, G. Csiszár, J. Cizek, S. Westerkamp, C. Borchers, T. Ungár, S. Goto, F. Liu, R. Kirchheim: Metall. Mater. Trans. A, 2013, vol. A44, pp. 3882-3889.10.1007/s11661-013-1723-x ↗
26. [26] J. Takahashi, M. Kosaka, K. Kawakami, T. Tarui: Acta Mater., 2012, vol. 60, pp. 387-395.10.1016/j.actamat.2011.09.014 ↗
27. [27] J. Wilde, A. Cerezo, G.D.W. Smith: Scripta Mater., 2000, vol. 43, pp. 39-48.10.1016/S1359-6462(00)00361-4 ↗
28. [28] V.G. Gavriljuk: Scripta Mater., 2001, vol. 45, pp. 1469-1472.10.1016/S1359-6462(01)01185-X ↗
29. [29] C. Borchers, R. Kirchheim: Prog. Mater. Sci., 2016, vol. 82, pp. 405-444.10.1016/j.pmatsci.2016.06.001 ↗
30. [30] M.K. Miller: J. Phys., 1987, vol. 48, pp. 565-570.10.1051/jphys:01987004804069300 ↗
31. [31] J. Takahashi, T. Tarui, K. Kawakami: Ultramicroscopy, 2009, vol. 109, pp. 193-199.10.1016/j.ultramic.2008.10.013 ↗
32. N. Guelton, M. François: Metall. Trans. A, 2020, https://doi.org/10.1007/s11661-020-05640-4.10.1007/s11661-020-05640-4 ↗
33. [33] J. Chakraborty, M. Ghosh, R. Ranjan, G. Das, D. Das, S. Chandra: Phil. Mag., 2013, vol. 93, pp. 4598-4616.10.1080/14786435.2013.838010 ↗
34. [34] G. Langford: Metall. Trans. A, 1977, vol. 8A, pp. 861-875.10.1007/BF02661567 ↗
35. [35] G. Langford: Metall. Trans. B, 1970, vol. B1, pp. 465-477.10.1007/BF02811557 ↗
36. [36] X. Zhang, A. Godfrey, N. Hansen, X. Huang: Acta Mater., 2013, vol. 61, pp. 4898-4909.10.1016/j.actamat.2013.04.057 ↗
37. [37] T. Teshima, M. Kosaka, K. Ushioda, N. Koga, N. Nakada: Mater. Sci. Eng. A, 2017, vol. A679, pp. 223-229.10.1016/j.msea.2016.10.018 ↗
38. [38] Y. Yasuda, T. Ohashi: ISIJ Int., 2016, vol. 56, pp. 2320-2326.10.2355/isijinternational.ISIJINT-2016-411 ↗
39. [39] X. Zhang, A. Godfrey, N. Hansen, X. Huang, W. Liu, Q. Liu: Mater. Charact., 2010, vol. 61, pp. 65-72.10.1016/j.matchar.2009.10.007 ↗
40. [40] C.W. Bang, J.B. Seol, Y.S. Yang, C.G. Park: Scripta Mater., 2015, vol. 108, pp. 151-155.10.1016/j.scriptamat.2015.07.004 ↗
41. [41] T. Tarui, J. Takahashi, H. Tashiro, N. Maruyama, S. Hishida: Nippon steel technical reports, 2005, vol. 91, pp. 56-61.
42. [42] W.J. Nam, C.M. Bae: Mater. Sci. Eng., 1995, vol. 203, pp. 278-285.10.1016/0921-5093(95)09826-7 ↗
43. P. Watté, P. Van Houtte, E. Aernoudt, J. GilSevillano, W. Van Raemdonck, I. Lefever: Mater. Sci. Forum, 1994, vol. 157, pp. 1689-1694.10.4028/www.scientific.net/MSF.157-162.1689 ↗
44. J. Alkorta, J.M. Martinez-Esnaola, P. de Jaeger, J. Gil Sevillano: 38th Risø International Symposium on Materials Science. IOP Conf. Series: Materials Science and Engineering, 2017, vol. 219, pp. 012010–8.10.1088/1757-899X/219/1/012010 ↗
45. [45] X. Hu, P. Van Houtte, M. Liebeherr, A. Walentek, M. Seefeldt, H. Vandekinderen: Acta Mater., 2006, vol. 54, pp. 1029-1040.10.1016/j.actamat.2005.10.030 ↗
46. [46] J.W. Park, S.D. Kim, S.P. Hong, S.I. Baik, D.S. Ko, C.Y. Lee, D.L. Lee, Y.W. Kim: Mater. Sci. Eng. A, 2011, vol. 528A, pp. 4947-4952.10.1016/j.msea.2011.03.051 ↗
47. [47] D. Wei, L. Li, X. Min, F. Fang, Z. Xie, J. Jiang: Mater. Charact., 2019, vol. 153, pp. 108-114.10.1016/j.matchar.2019.05.003 ↗
48. M.H. Hong, W.T. Reynolds, T. Tarui, K. Hono: Met. Mater. Trans. A, 1999, vol. 30A, pp. 717-728.10.1007/s11661-999-0063-3 ↗
49. [49] C. Borchers, T. Al-Kassab, S. Goto, R. Kirchheim: Mater. Sci. Eng. A, 2009, vol. 502A, pp. 131-138.10.1016/j.msea.2008.10.018 ↗
50. [50] F. Fang, Y. Zhau, P. Liu, L. Zhou, X. Hu, X. Zhou, Z. Xie: Mater. Sci. Eng. A, 2014, vol. 608A, pp. 11-15.10.1016/j.msea.2014.04.050 ↗
51. [51] V.I. Voronin, I.F. Berger, Y.N. Gornostyrev, V.N. Urtsev, A.R. Kuznetsov, A.V. Shmakov: JETP Lett., 2010, vol. 91, pp. 143-146.10.1134/S0021364010030094 ↗
52. [52] H.G. Read, W.T. Reynolds, K. Hono, T. Tarui: Scripta Mater., 1997, vol. 37, pp. 1221-1230.10.1016/S1359-6462(97)00223-6 ↗
53. [53] W.J. Nam, C.M. Bae, S.J. Oh, S.J. Kwon: Scripta Mater., 2000, vol. 42, pp. 457-463.10.1016/S1359-6462(99)00372-3 ↗
54. [54] V.G. Gavriljuk: Mater. Sci. Eng. A, 2003, vol. 345A, pp. 81-89.10.1016/S0921-5093(02)00358-1 ↗
55. [55] A.H. Cottrell, B.A. Bilby: Proc. Phys. Soc. London A, 1949, vol. 62A, pp. 49-62.10.1088/0370-1298/62/1/308 ↗
56. [56] A.W. Cochardt, G. Shoek, H. Wiedersich: Acta Metall., 1955, vol. 3, pp. 533-537.10.1016/0001-6160(55)90111-5 ↗
57. [57] R.G.A. Veiga, M. Perez, C.S. Becquart, C. Domain: J. Phys.: Condens. Matter, 2013, vol. 25, pp. 025401-7.
58. [58] O. Waseda, R.G.A. Veiga, J. Morthomas, P. Chantrenne, C.S. Becquart, F. Ribeiro, A. Jelea, H. Goldenstein, M. Perez: Scripta Mater., 2017, vol. 129, pp. 16-19.10.1016/j.scriptamat.2016.09.032 ↗
59. [59] Y. Hanlumyuang, P.A. Gordon, T. Neeraj, D.C. Chrzan: Acta Mater., 2010, vol. 58, pp. 5481-5490.10.1016/j.actamat.2010.06.024 ↗
60. [60] K. Nakashima, M. Suzuki, Y. Futamura, T. Tsuchiyama, S. Takaki: Mater. Sci. Forum, 2006, vol. 503, pp. 627-632.10.4028/www.scientific.net/MSF.503-504.627 ↗
61. [61] J. Alkorta, J.M. Martínez-Esnaola, J. Gil Sevillano: Acta Mater., 2006, vol. 54, pp. 3445-3452.10.1016/j.actamat.2006.03.034 ↗
62. J. GilSevillano: J. Phys. III, 1991, vol. 1, pp. 967-988.
63. A.D. Rollet, V.F. Kocks, J.D. Embury, M.G. Stout, R.D. Doherty: Proc. 8th Int Conf. on Strength of Metals and Alloys (ICSMA 8), 1988, vol. 1, pp. 433–38.10.1016/B978-0-08-034804-9.50065-6 ↗
64. [64] J. Alkorta, J. Gil Sevillano: J. Mater. Res., 2012, vol. 27, pp. 45-52.10.1557/jmr.2011.284 ↗
65. [65] G. Ghosh: AIP Advances, 2015, vol. 5, pp. 087102-19.10.1063/1.4928208 ↗
66. [66] S.A. Kim, W.L. Jonhson: Mater. Sci. Eng. A, 2007, vol. 452A, pp. 633-639.10.1016/j.msea.2006.11.147 ↗
67. [67] M. Janecek, F. Louchet, B. Doisneau-Cottignies, Y. Bréchet, N. Guelton: Phil. Mag., 2000, vol. 80, pp. 1605-1619.10.1080/01418610008212138 ↗
68. J. Gil Sevillano: Proc. 5th Int Conf. on Strength of Metals and Alloys (ICSMA 5), 1979, vol. 2, pp. 819–825.10.1016/B978-1-4832-8412-5.50138-7 ↗
69. [69] K.H. Eckelmeyer, R.W. Hertzberg: Metall. Trans., 1972, vol. 3, pp. 609-616.10.1007/BF02642741 ↗
70. [70] F. Louchet, J. Weiss, T. Richeton: Phys. Rev. Lett., 2006, vol. 97, pp. 075504-4.10.1103/PhysRevLett.97.075504 ↗
71. [71] Y. Li, A.J. Bushby, D.J. Dunstan: Materialia, 2018, vol. 4, pp. 182-191.10.1016/j.mtla.2018.08.017 ↗
72. [72] X.D. Zhang, A. Godfrey, X. Huang, N. Hansen, Q. Liu: Acta Mater., 2011, vol. 59, pp. 3422-3430.10.1016/j.actamat.2011.02.017 ↗
73. [73] A. Phelippeau, S. Pommier, T. Tsakalakos, M. Clavel, C. Prioul: Fatigue Fract. Engng Mater. Struct., 2006, vol. 29, pp. 243-253.10.1111/j.1460-2695.2005.00985.x ↗
74. [74] N. Guo, B.F. Luan, B.S. Wang, Q. Liu: Sci. China Technol. Sci., 2013, vol. 56, pp. 1139-1146.10.1007/s11431-013-5184-7 ↗
75. B. Gonzalez, V. Buono, E.P.E. Silva, T. Lima, M. Andrade: Proceedings of the 70th annual convention of the Wire Association International, 2000, pp. 152–56.
76. [76] J. Toribio, B. Gonzalez, J.C. Matos: Materials Transactions, 2014, vol. 55, pp. 93-98.10.2320/matertrans.MA201316 ↗
77. H. Mehrer: in Solutions of the Diffusion Equation (chapter 3), Diffusion in solids, Springer, Berlin, 2007, pp. 37–53.10.1007/978-3-540-71488-0_3 ↗
78. [78] F. Danoix, D. Julien, X. Sauvage, J. Copreaux: Mater. Sci. Eng. A, 1998, vol. 250A, pp. 8-13.10.1016/S0921-5093(98)00529-2 ↗
79. [79] K. Hono, M. Ohnuma, M. Murayama, S. Nishida, A. Yoshie, T. Takahashi: Scripta Mater., 2001, vol. 44, pp. 977-983.10.1016/S1359-6462(00)00690-4 ↗
80. [80] X. Sauvage, N. Guelton, D. Blavette: Scripta Mater., 2002, vol. 46, pp. 459-464.10.1016/S1359-6462(02)00002-7 ↗
81. [81] N. Min, W. Li, H. Li, X. Jin: J. Mater. Sci. Technol., 2010, vol. 26, pp. 776-782.10.1016/S1005-0302(10)60123-5 ↗
82. [82] A. Lamontagne, X. Kleber, V. Massardier-Jourdan, D. Mari: Phil. Mag. Lett., 2014, vol. 94, pp. 495-502.10.1080/09500839.2014.938137 ↗
83. [83] N. Maruyama, T. Tarui, H. Tashiro: Scripta Mater., 2002, vol. 46, pp. 599-603.10.1016/S1359-6462(02)00037-4 ↗
84. [85] J. Toribio, E. Ovejero: Scripta Mater., 1998, vol. 39, pp. 323-328.10.1016/S1359-6462(98)00166-3 ↗
85. [86] A. Durgaprasad, S. Giri, S. Lenka, S. Kundu, S. Mishra, S. Chandra, R.D. Doherty, I. Samajdar: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4583-4597.10.1007/s11661-017-4269-5 ↗
86. [87] Y. Zhao, Y. Tan, X. Ji, Y. He, Y. Liang, S. Xiang: JOM, 2019, vol. 71, pp. 4041-4049.10.1007/s11837-019-03485-w ↗
87. [88] G. Gershteyn, F. Nürnberger, F. Cianciosi, N. Shevchenko, M. Schaper, F.W. Bach: Steel Res. Int., 2011, vol. 82, pp. 1368-1374.10.1002/srin.201100020 ↗
88. [89] S. Sato, K. Wagatsuma, M. Ishikuro, E.P. Kwon, H. Tashiro, S. Suzuki: ISIJ Int., 2013, vol. 53, pp. 673-679.10.2355/isijinternational.53.673 ↗