Microstructure, Wetting, and Tensile Behaviors of Sn-Ag Alloy Reinforced with Copper-Coated Carbon Nanofibers Produced by the Melting and Casting Route
Source abstract
Abstract
A Cu-coated C nanofiber (Cu-CNF) composite is added to a Sn-3.5Ag alloy to fabricate a solder nanocomposite using mechanical stirring and a melting technique. The microstructural features of the samples, i.e., the β-Sn grain size and the distribution and thickness of the Ag3Sn intermetallic compound (IMC), are statistically measured. The wettability of the developed solders is tested on a Cu substrate by contact-angle and spreading-factor measurements. The experimental results indicate that the presence of up to 0.05 wt pct Cu-CNFs in the solder matrix reduces the β-Sn secondary dendritic arm spacing significantly. Additionally, the spread ratio and spread factor are improved to 93 and 96 pct, respectively, owing to the adsorption of surface-active CNFs in the solder matrix. Furthermore, the addition of 0.05 wt pct Cu-CNFs to the Sn-Ag (SA) alloy increases the microhardness, tensile strength, elongation percentage (El pct), and toughness by 40, 35, 11, and 33 pct, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. M. Abtew and G. Selvaduray: Mater. Sci. Eng. R, 2000, vol. 27, pp. 95–141.10.1016/S0927-796X(00)00010-3 ↗
2. K. Zeng and K.N. Tu: Mater. Sci. Eng. R, 2002, vol. 38, pp. 55–105.10.1016/S0927-796X(02)00007-4 ↗
3. A Sharma, S Das, and K Das: in Electrodeposition of Composite Materials, AMA Mohamed, ed., InTech, Croatia, 2016, pp. 253–74.
4. J. Shen, Y.C. Liu, Y.J. Han, Y.M. Tian, and H.X. Gao: J. Electron. Mater., 2006, vol. 35, pp. 1672–79.10.1007/s11664-006-0216-8 ↗
5. A. Sharma, S. Bhattacharya, S. Das and K. Das: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5587–5601.10.1007/s11661-013-1894-5 ↗
6. H.Y. Lee, A. Sharma, S.H. Kee, Y.W. Lee, J.T. Moon, and J.P. Jung: Electron. Mater. Lett., 2014, vol. 10, pp. 997–1004.10.1007/s13391-014-3364-7 ↗
7. M. Kitajama and T. Sohono: FUJITSU Sci. Tech. J., 2005, vol. 41 (2), pp. 225–35.
8. Y.S. Ki, H.-I. Kim, J.M. Kim, and Y.E. Shin: JWJ, 2003, vol. 21, pp. 92–98.
9. S. Choi, J.G. Lee, F. Guo, T.R. Bieler, K.N. Subramanian, and J.P. Lucas: JOM, 2001, vol. 53 (6), pp. 22–26.10.1007/s11837-001-0098-4 ↗
10. K.I. Kang, J.P. Jung, W.H. Bang, J.H. Park, and K.H. Oh: Mater. Sci. Forum, 2008, vols. 580–582, pp. 177–82.10.4028/www.scientific.net/MSF.580-582.177 ↗
11. K. Suganuma, S.-H. Huh, K. Kim, H. Nakase, and Y. Nakamura: Mater. Trans., 2001, vol. 42 (2), pp. 286–91.10.2320/matertrans.42.286 ↗
12. A. Nadia and A.S.M.A. Haseeb: Solder Surf. Mt. Tech., 2011, vol. 23, pp. 68–74.10.1108/09540911111120131 ↗
13. K.K. Xiang, A.S.M.A. Haseeb, M.M. Arafat, and G. Yingxin: Proc. 4th Asia Symp. Quality Electronic Design, IEEE, Penang, Malaysia, 2012, pp. 297–301.
14. H. Nishikawa, A. Komatsu, and T. Takemoto: Mater. Trans., 2008, vol. 49 (7), pp. 1518–23.10.2320/matertrans.MF200851 ↗
15. S.H. Kim and J. Yu: Proc. Int. Symp. Microelectron., Fall 2010, vol. 2010 (1), pp. 000294–97.10.4071/isom-2010-TP4-Paper2 ↗
16. J.X. Wang, S.B. Xue, Z.J. Han, S.L. Yu, Y. Chen, Y.P. Shi, and H. Wang: J. Alloys Compd., 2009, vol. 467, pp. 219–26.10.1016/j.jallcom.2007.12.033 ↗
17. X.L. Zhong and M. Gupta: J. Phys. D: Appl. Phys., 2008, vol. 41, p. 095403.10.1088/0022-3727/41/9/095403 ↗
18. A.K. Gain, Y.C. Chan, and W.K.C. Yung: Microelectron. Reliab., 2011, vol. 51, pp. 2306–13.10.1016/j.microrel.2011.03.042 ↗
19. A.K. Gain, Y.C. Chan, and W.K.C. Yung: Microelectron. Reliab., 2011, vol. 51, pp. 975–84.10.1016/j.microrel.2011.01.006 ↗
20. P. Babaghorbani, S.M.L. Nai, and M. Gupta: J. Mater. Sci.: Mater. Electron., 2009, vol. 20, pp. 571–76.
21. P. Liu, P. Yao, and J. Liu: J. Electron. Mater., 2008, vol. 37, pp. 874–79.10.1007/s11664-007-0366-3 ↗
22. A. Fawzy, S.A. Fayek, M. Sobhy, E. Nassr, M.M. Mousa, and G. Saad: J. Mater. Sci.: Mater. Electron. 2013, vol. 24, pp. 3210–18.
23. M.A.A. Mohd Salleh, A.B. Mustafa, H. Kamarudin, M. Bnhussain, M.H. Zan@Hazizi and F. Somidin: Phys. Procedia, 2011, vol. 22, pp. 299–304.10.1016/j.phpro.2011.11.047 ↗
24. A. Sharma, B.G. Baek and J.P. Jung: Mater. Des., 2015, vol. 87, pp. 370–79.10.1016/j.matdes.2015.07.137 ↗
25. S.M.L. Nai, J. Wei, and M. Gupta: J. Electron. Mater., 2006, vol. 35, pp. 1518–22.10.1007/s11664-006-0142-9 ↗
26. A. Sharma, H.R. Sohn, and J.P. Jung: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 494–503.10.1007/s11661-015-3214-8 ↗
27. S. Bhattacharya, A. Sharma, S. Das, and K. Das: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1292–1312.10.1007/s11661-015-3313-6 ↗
28. A. Sharma, D.E. Xu, J. Chow, M. Mayer, H.R. Sohn, and J.P. Jung: Electron. Mater. Lett., 2015, vol. 11, pp. 1072–77.10.1007/s13391-015-4454-x ↗
29. S. Chantaramanee, S. Wisutmethangoon, L. Sikong, and T. Plookphol: J. Mater. Sci.: Mater. Electron., 2013, vol. 24, pp. 3707–15.
30. H.Y. Jing, H.J. Guo, L.X. Wang, J. Wei, L.Y. Xu, and Y.D. Han: J. Alloys Compd., 2017, vol. 702, pp. 669–78.10.1016/j.jallcom.2017.01.286 ↗
31. Y.D. Han, S.M.L. Nai, H.Y. Jing, L.Y. Xu, C.M. Tan, and J. Wei: J. Mater. Sci.: Mater. Electron., 2011, vol. 22, pp. 315–22.
32. V. Desmaris, A.M. Saleem, S. Shafiee, J. Berg, M.S. Kabir, A. Johansson, and A.B. Smoltek: Proc. IEEE Electron. Comp. Tech. Conf., IEEE, Orlando, FL, 2014, pp. 1071–76.
33. W.R. Osorio, D.R. Leiva, L.C. Peixoto, L.R. Garcia, and A. Garcia: J. Alloys Compd., 2013, vol. 562, pp. 194–204.10.1016/j.jallcom.2013.02.050 ↗
34. W.R. Osório, L.C. Peixoto, L.R. Garcia, N. Mangelinck-Noël, and A. Garcia: J. Alloys Compd., 2013, vol. 572, pp. 97–106.10.1016/j.jallcom.2013.03.234 ↗
35. L.R. Garcia, W.R. Osório, and A. Garcia: Mater. Des., 2011, vol. 32, pp. 3008–12.10.1016/j.matdes.2010.12.046 ↗
36. F. Ochoa, J.J. Williams, and N Chawla: J. Electron. Mater., 2003, vol. 32, pp. 1414–20.10.1007/s11664-003-0109-z ↗
37. W.R. Osório, L.C. Peixoto, L.R. Garcia, A. Garcia, and J.E. Spinelli: Int. J. Electrochem. Sci., 2012, vol. 7, pp. 6436–52.10.1016/S1452-3981(23)19493-4 ↗
38. A.K. Gain and L. Zhang: Microelectron. Reliab., 2018, vol. 83, pp. 101–10.10.1016/j.microrel.2018.02.022 ↗
39. Mikell P. Groover: Fundamentals of Modern Manufacturing: Materials, Processes, and Systems, 4th ed., John Wiley & Sons, Hoboken, NJ, 2010.
40. “Testing Methods for Soldering Fluxes,” Japanese Industrial Standard JIS Z 3197, 2012.
41. G. Humpston and D.M. Jacobson: Principles of Soldering, ASM International, Warrendale, OH, 2004.10.31399/asm.tb.ps.9781627083522 ↗
42. Y. Sun, X. Li, X. Yu, D. Ge, J. Chen, and J. Chen: Acta Metall. Sinica Engl., 2014, vol. 27, pp. 101–06.10.1007/s40195-014-0032-8 ↗
43. D.H. Jung, A. Sharma, and J.P. Jung: J. Alloys Compd., 2018, vol. 743, pp. 300–13.10.1016/j.jallcom.2018.02.017 ↗
44. A. HosseiniMonazzah, R. Bagheri, S.M. SeyedReihani, and H. Pouraliakbar: IJDM, 2015, vol. 24, pp. 245–62.
45. K.S. Tun and M. Gupta: Comp. Sci. Technol., 2007, vol. 67, pp. 2657–64.10.1016/j.compscitech.2007.03.006 ↗
46. C.S. Goh, J. Wei, L.C. Lee, and M. Gupta: Acta Mater., 2007, vol. 55, pp. 5115–21.10.1016/j.actamat.2007.05.032 ↗
47. R.J. Arsenault and N. Shi: Mater. Sci. Eng. A, 1986, vol. 81, pp. 175–87.10.1016/0025-5416(86)90261-2 ↗
48. A.R. Geranmayeh, R. Mahmudi, and M. Kangooie: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3967–72.10.1016/j.msea.2011.02.034 ↗
49. A. Mohammadi and R. Mahmudi: J. Electron. Mater., 2018, vol. 47, pp. 1721–29.10.1007/s11664-017-5923-9 ↗
50. W. Martienssen and H. Warlimont: Springer Handbook of Condensed Matter and Materials Data, Springer, Berlin, 2005.10.1007/3-540-30437-1 ↗
51. R.M. Rashad, O.M. Awadallah, and A.S. Wifi: JAMME, 2013, vol. 2, pp. 74–80.
52. L.S. Schadler, S.C. Giannaris, and P.M. Ajayan: Appl. Phys. Lett., 1998, vol. 73, pp. 3842–44.10.1063/1.122911 ↗
53. J.W. An, D.H. You, and D.S. Lim: Wear, 2003, vol. 255, pp. 677–81.10.1016/S0043-1648(03)00216-3 ↗
54. H. Ma, J. Zeng, M.L. Realff, and S. Kumar: Compos. Sci. Technol., 2003, vol. 63, pp. 1617–28.10.1016/S0266-3538(03)00071-X ↗
55. R. Bakshi and A. Agarwal: Carbon, 2011, vol. 49, pp. 533–44.10.1016/j.carbon.2010.09.054 ↗