Oxidation Behavior Across Composition Space Relevant to Co-based γ/γ′ Alloys
Source abstract
Abstract
A multi-source ion-plasma deposition technique was used to create a series of three combinatorial libraries across the Co-Ni-Al-W-Cr-Ta composition space relevant to the formation of Co-based γ/γ′ microstructures. Alloys were isothermally oxidized for 1 hour in air at 1100 °C, and screened for Al2O3 scale formation using a high-throughput photo-stimulated luminescence spectroscopy technique. Select compositions were then analyzed in cross-section via EDS in the SEM and TEM. The resulting oxide microstructures are presented, and paths to explain their evolution are proposed. Compositions forming α-Al2O3 with thinner amounts of overlying oxides are highlighted. The thinnest scale observed was ~ 1 μm, comparable to second-generation Ni-base superalloys oxidized under the same conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. R.C. Reed: The Superalloys, Cambridge University Press, New York, 2006.10.1017/CBO9780511541285 ↗
2. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Science, 2006, vol. 312, pp. 90–1.10.1126/science.1121738 ↗
3. M. Tsunekane, A. Suzuki, and T.M. Pollock: Intermetallics, 2011, vol. 19, pp. 636–43.10.1016/j.intermet.2010.12.018 ↗
4. M.S. Titus, A. Suzuki, and T.M. Pollock: Superalloys 2012: 12th International Symposium on Superalloys, E. Huron, R. Reed, M. Hardy, M. Mills, R. Montero, P. Portella, and J. Telesman, eds., TMS (The Minerals, Metals & Materials Society), 2012, pp. 823–32.
5. T.M. Pollock, J. Dibbern, M. Tsunekane, J. Zhu, and A. Suzuki: JoM, 2010, vol. 62, pp. 58–63.10.1007/s11837-010-0013-y ↗
6. H.-Y. Yan, V.A. Vorontsov, and D. Dye: Corros. Sci., 2014, vol. 83, pp. 382–95.10.1016/j.corsci.2014.03.002 ↗
7. F.H. Stott, G.C. Wood, and J. Stringer: Oxid. Met., 1995, vol. 44, pp. 113–45.10.1007/BF01046725 ↗
8. N. Birks, G.H. Meier, and F.S. Pettit: Introduction to the High-Temperature Oxidation of Metals, 2nd ed., Cambridge University Press, Cambridge, 2006.10.1017/CBO9781139163903 ↗
9. L. Klein, Y. Shen, M.S. Killian, and S. Virtanen: Corros. Sci., 2011, vol. 53, pp. 2713–20.10.1016/j.corsci.2011.04.020 ↗
10. C.A. Stewart, R.K. Rhein, A. Suzuki, T.M. Pollock, and C.G. Levi: Superalloys 2016: 13th International Symposium on Superalloys, M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S. Tin, eds., TMS (The Minerals, Metals & Materials Society), 2016, pp. 991–99.
11. T. Omori, K. Oikawa, J. Sato, I. Ohnuma, U.R. Kattner, R. Kainuma, and K. Ishida: Intermetallics, 2013, vol. 32, pp. 274–83.10.1016/j.intermet.2012.07.033 ↗
12. L. Klein, A. Bauer, S. Neumeier, M. Göken, and S. Virtanen: Corros. Sci., 2011, vol. 53, pp. 2027–34.10.1016/j.corsci.2011.02.033 ↗
13. K. Shinagawa, T. Omori, J. Sato, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Mater. Trans., 2008, vol. 49, p. 1474-9.10.2320/matertrans.MER2008073 ↗
14. G.R. Wallwork and A.Z. Hed: Oxid. Met., 1971, vol. 3, pp. 213–27.10.1007/BF00603522 ↗
15. A. Mottura, A. Janotti, and T.M. Pollock: Superalloys 2012: 12th International Symposium on Superalloys, E. Huron, R. Reed, M. Hardy, M. Mills, R. Montero, P. Portella, and J. Telesman, eds., TMS (The Minerals, Metals & Materials Society), 2012, pp. 685–93.
16. M.P. Brady, B. Gleeson, and I.G. Wright: JOM, 2000, vol. 52, pp. 16–21.10.1007/s11837-000-0109-x ↗
17. F.B. Ismail, V.A. Vorontsov, T.C. Lindley, M.C. Hardy, D. Dye, and B.A. Shollock: Corros. Sci., 2017, vol. 116, pp. 44–52.10.1016/j.corsci.2016.12.009 ↗
18. L. Klein, B. von Bartenwerffer, M.S. Killian, P. Schmuki, and S. Virtanen: Corros. Sci., 2014, vol. 79, pp. 29–33.10.1016/j.corsci.2013.10.022 ↗
19. A.-C. Yeh, S.-C. Wang, C.-F. Cheng, Y.-J. Chang, and S.-C. Chang: Oxid. Met., 2016, vol. 86, pp. 99-112.10.1007/s11085-016-9623-2 ↗
20. R.R. Adharapurapu, J. Zhu, V.S. Dheeradhada, D.M. Lipkin, and T.M. Pollock: Acta Mater., 2014, vol. 77, pp. 379–93.10.1016/j.actamat.2014.02.030 ↗
21. J.L. Smialek: Metall. Trans. A, 1991, vol. 22, pp. 739–52.10.1007/BF02670297 ↗
22. L.J. Carroll, Q. Feng, J.F. Mansfield, and T.M. Pollock: Mater. Sci. Eng. A, 2007, vol. 457, pp. 292–9.10.1016/j.msea.2006.12.036 ↗
23. D.M. Lipkin and D.R. Clarke: Oxid. Met., 1996, vol. 45, pp. 267–80.10.1007/BF01046985 ↗
24. C.J. Metting, J.K. Bunn, E. Underwood, S. Smoak, and J. Hattrick-Simpers: ACS Comb. Sci., 2013, vol. 15, pp. 419–24.10.1021/co3000902 ↗
25. C.A. Stewart, A. Suzuki, T.M. Pollock, and C.G. Levi: Oxid. Met., 2018, vol. 90, pp. 485-498.10.1007/s11085-018-9849-2 ↗
26. G. Kresse and J. Furthmüller: Comput. Mater. Sci., 1996, vol. 6, pp. 15–50.10.1016/0927-0256(96)00008-0 ↗
27. G. Kresse and D. Joubert: Phys. Rev. B, 1999, vol. 59, pp. 1758-75.10.1103/PhysRevB.59.1758 ↗
28. J.P. Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, p. 3865-8.10.1103/PhysRevLett.77.3865 ↗
29. CASM v0.2.1: GitHub, 2017, https://github.com/prisms-center/CASMcode. Accessed 1 May 2019.
30. J.C. Thomas and A. Van der Ven: Phys. Rev. B, 2013, vol. 88, pp. 214111.10.1103/PhysRevB.88.214111 ↗
31. B. Puchala and A. Van der Ven: Phys. Rev. B, 2013, vol. 88, pp. 094108.10.1103/PhysRevB.88.094108 ↗
32. A. Van der Ven, J.C. Thomas, Q. Xu, and J. Bhattacharya: Math. Comput. Simul., 2010, vol. 80, pp. 1393–410.10.1016/j.matcom.2009.08.008 ↗
33. J. Zhu, M.S. Titus, and T.M. Pollock: J. Phase Equilibria Diffus., 2014, vol. 35, pp. 595–611.10.1007/s11669-014-0327-5 ↗
34. Thermodynamic database for multi-component Cobalt-based alloys, CompuTherm LLC., 2019, http://www.computherm.com/index.php?route=product/product&path=59_83&product_id=31. Accessed 1 May 2019.
35. K. Kawagishi, A.-C. Yeh, T. Yokokawa, T. Kobayashi, Y. Koizumi, and H. Harada: Superalloys 2012: 12th International Symposium on Superalloys, E. Huron, R. Reed, M. Hardy, M. Mills, R. Montero, P. Portella, and J. Telesman, eds., TMS (The Minerals, Metals & Materials Society), 2012, pp. 189–95.10.1002/9781118516430.ch21 ↗
36. M.A. Lafata, L.H. Rettberg, M.Y. He, and T.M. Pollock: Metall. Mater. Trans. A, 2018, vol. 49, pp. 105–16.10.1007/s11661-017-4392-3 ↗
37. R.W. Jackson, M.S. Titus, M.R. Begley, and T.M. Pollock: Surf. Coat. Technol., 2016, vol. 289, pp. 61–8.10.1016/j.surfcoat.2015.12.083 ↗
38. Y. Xu, L. Zhang, J. Li, X. Xiao, X. Cao, G. Jia, and Z. Shen: Mater. Sci. Eng. A, 2012, vol. 544, pp. 48–53.10.1016/j.msea.2012.03.006 ↗
39. M. Simonetti and P. Caron: Mater. Sci. Eng. A, 1998, vol. 254, pp. 1-12.10.1016/S0921-5093(98)00766-7 ↗
40. A. Bauer, S. Neumeier, F. Pyczak, and M. Göken: Superalloys 2012: 12th International Symposium on Superalloys, E. Huron, R. Reed, M. Hardy, M. Mills, R. Montero, P. Portella, and J. Telesman, eds., TMS (The Minerals, Metals & Materials Society), 2012, pp. 695–703.10.1002/9781118516430.ch77 ↗
41. C. Wagner: Z. Für Elektrochem., 1959, vol. 63, pp. 772–90.
42. J.L. Meijering: in Advances in Materials Research, H. Herman, ed., vol. 5, Wiley-Interscience, New York, 1971, pp. 1–81.
43. Y. Minamino, Y. Koizumi, N. Tsuji, T. Yamada, and T. Takahashi: Mater. Trans., 2003, vol. 44, pp. 63–71.10.2320/matertrans.44.63 ↗
44. F.H. Stott, P.K.N. Bartlett, and G.C. Wood: Oxid. Met., 1987, vol. 27, pp. 37–55.10.1007/BF00656728 ↗
45. H.M. Hindam and W.W. Smeltzer: J. Electrochem. Soc., 1980, vol. 127, pp. 1622–1630.10.1149/1.2129964 ↗
46. M. Weiser, Y.M. Eggeler, E. Spiecker, and S. Virtanen: Corros. Sci., 2018, vol. 135, pp. 78–86.10.1016/j.corsci.2018.02.020 ↗