Influence of Tertiary Gamma Prime (γ′) Size Evolution on Dwell Fatigue Crack Growth Behavior in CG RR1000
Source abstract
Abstract
Abstract This work investigates coarsening behavior of strengthening precipitates (γ′) in coarse-grained RR1000 after isothermal exposure for various times (50 to 500 hours) at 700 °C and 750 °C. The impact of these isothermal treatments is then studied by carrying out dwell (1 hour) fatigue crack growth tests at 700 °C in air. Such dwell periods can increase crack growth rates by nearly two orders of magnitude compared with baseline (0.25 Hz trapezoidal waveform) fatigue crack growth tests. Predominantly, scanning electron microscopy was used forγ′ analysis. Transmission electron microscopy was also utilized when necessary. Overaging as a thermodynamically driven and diffusion-controlled process strongly affects tertiaryγ′ precipitates for the temperatures and treatment times investigated here. No influence of overaging on baseline fatigue behavior is observed. However, after overaging at 750 °C for 500 hours (which increases the mean tertiaryγ′ size by a factor of two from 17 to 37 nm), dwell crack growth rates at 700 °C are reduced by one order of magnitude. Increased dwell fatigue crack growth resistance is also measured after overaging for 100 hours at 700 °C. The potential influence ofγ′ distributions on dwell fatigue crack growth resistance is discussed in terms of stress relaxation behavior during dwell periods.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. R. C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006, pp. 33–120.10.1017/CBO9780511541285 ↗
2. R.J. Mitchell, J.A. Lemsky, R. Ramanathan, H.Y. Li, K.M. Perkins, and L.D. Connor: Superalloys 2008—Proc. 11th Int. Symp. Superalloys, Minerals, Metals & Materials Society, Warrendale, 2008, pp. 347–56.10.7449/2008/Superalloys_2008_347_356 ↗
3. A.J. Manning, D. Knowles, and C.J. Small: A nickel base superalloy, European Patent EP1 193 321 A1, 2002.
4. M.C. Hardy, B. Zirbel, G. Shen, and R. Shankar: Superalloys 2004—Proc. 10th Int. Symp. Superalloys, Minerals, Metals & Materials Society, Warrendale, 2004, pp. 83–90.10.7449/2004/Superalloys_2004_83_90 ↗
5. S. Everitt, M.J. Starink, and P.A.S. Reed: Superalloys 2008—Proc. 11th Int. Symp. Superalloys, Minerals, Metals & Materials Society, Warrendale, 2008, pp. 741–50.10.7449/2008/Superalloys_2008_741_750 ↗
6. M. A. Hicks and J. E. King: Int. J. Fatigue, 1983, vol. 5, pp 67-74.10.1016/0142-1123(83)90056-7 ↗
7. H. Ghonem, T. Nicholas, and A. Pineau: Fatigue Fract. Eng. Mater. Struct, 1993, vol. 16, pp. 565–576.10.1111/j.1460-2695.1993.tb00767.x ↗
8. S. A. Padula, A. Shyam, R. O. Ritchie, and W. W. Milligan: Int. J. Fatigue, 1999, vol. 21, pp. 725-731.10.1016/S0142-1123(99)00036-5 ↗
9. M.L. Brogdon and A.H. Rosenberger: Superalloys 2008—Proc. 11th Int. Symp. Superalloys, Minerals, Metals & Materials Society, Warrendale, 2008, pp. 583–88.10.7449/2008/Superalloys_2008_583_588 ↗
10. H. Yang, R. Bao, J. Zhang, L. Peng, and B. Fei: Int. J. Fatigue, 2011, vol. 33, pp. 632-641.10.1016/j.ijfatigue.2010.11.003 ↗
11. R. Jiang, S. Everitt, M. Lewandowski, N. Gao, and P. A. S. Reed: Int. J. Fatigue, 2014, vol. 62, pp217-227.10.1016/j.ijfatigue.2013.07.014 ↗
12. H. Y. Li, J. F. Sun, M. C. Hardy, H. E. Evans, S. J. Williams, T. J. A. Doel, and P. Bowen: Acta Mater., 2015, vol. 90, pp. 355–369.10.1016/j.actamat.2015.02.023 ↗
13. J.J. Schirra, P.L. R. Pratt, E. Hartford, E.S. Huron, K.R. Bain, D.P. Mourer, G. Electric, and A. Engines: Superalloys 2004—Proc. 10th Int. Symp. Superalloys, Minerals, Metals & Materials Society, Warrendale, Pennsylvania, 2004, pp. 341–50.10.7449/2004/Superalloys_2004_341_350 ↗
14. H. T. Pang and P. A. S. Reed: Int. J. Fatigue, 2008, vol. 30, pp. 2009–2020.10.1016/j.ijfatigue.2008.01.001 ↗
15. J. Telesman, T. Gabb, A. Carg, P. Bonacuse, and J. Gayda: Superalloys 2008—Proc. 11th Int. Symp. Superalloys, Wiley, New York, 2008, pp. 807–16.10.7449/2008/Superalloys_2008_807_816 ↗
16. K. Maciejewski and H. Ghonem: Superalloys 2012—Proc. 12th Int. Symp. Superalloys, Wiley, New York, 2012, pp. 421–30.10.1002/9781118516430.ch46 ↗
17. M. Preuss, J. K. L. Pang, P. J. Withers, and G. J. Baxter: Metall. Mater. Trans. A, 2002, vol. 33, pp. 3215–3225.10.1007/s11661-002-0307-y ↗
18. Y. Chen, R. Prasath Babu, T. J. A. Slater, M. Bai, R. Mitchell, O. Ciuca, M. Preuss, and S. J. Haigh: Acta Mater., 2016, vol. 110, pp. 295–305.10.1016/j.actamat.2016.02.067 ↗
19. I. M. Lifshitz and V. V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
20. C. Wagner: Zeitshrift für Elektrochemie, 1961, vol. 65, pp. 581–591.
21. P. K. Rastogi and A. J. Ardell: Acta Metall, 1971, vol. 19, pp. 321–330.10.1016/0001-6160(71)90099-X ↗
22. S. Zhao, X. Xie, G. D. Smith, and S. J. Patel: Mater. Lett., 2004, vol. 58, pp. 1784–1787.10.1016/j.matlet.2003.10.053 ↗
23. J. Telesman, T.P. Gabb, and L.J. Ghosn: Superalloys—Proc. 13th Int. Symp. Superalloys, Wiley, Hoboken, 2016, pp. 551–60.