The Effect of Bi on the Selective Oxide Formation on CMnSi TRIP Steel
Source abstract
Abstract
The effect of Bi addition on the selective oxidation and the galvanizability of CMnSi transformation-induced plasticity (TRIP) steels was studied by hot dip galvanizing laboratory simulations. Bi-added TRIP steels were intercritically annealed at 1093 K (820 °C) and galvanized in a 0.22 wt pct Al-containing Zn bath. The oxide morphology was investigated by scanning electron microscopy, transmission electron microscopy, and 3D atom probe tomography. Bi formed a Bi-enriched surface layer during the intercritical annealing. A decrease of the oxygen permeability was observed with increasing Bi addition. The internal oxidation was suppressed in Bi-added CMnSi TRIP steel. The surface oxide morphology was changed from a continuous layer morphology to a more lens-shaped morphology. The galvanizability of the Bi-added TRIP steel was improved by the combination of the change of the oxide morphology and the dissolution of the Bi-enriched surface layer during immersion of the strip in the Zn bath.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Y.F. Gong, H.S. Kim, B.C. De Cooman: ISIJ international, 2008, 48, pp. 1745–51.10.2355/isijinternational.48.1745 ↗
2. Y.F. Gong, H.S. Kim, B.C. De Cooman: ISIJ international, 2009, 49, pp. 557–63.10.2355/isijinternational.49.557 ↗
3. E. Bellhouse, J. McDermid: Metallurgical and Materials Transactions A, 2010, 41, pp. 1539–53.10.1007/s11661-010-0192-8 ↗
4. Y.F. Gong, B.C. De Cooman: ISIJ international, 2011, 51, pp. 630–37.10.2355/isijinternational.51.630 ↗
5. L. Cho, S.J. Lee, M.S. Kim, Y.H. Kim, B.C. De Cooman: Metallurgical and Materials Transactions A, 2013, 44, pp. 362–71.10.1007/s11661-012-1392-1 ↗
6. Y. Tobiyama, S. Fujita, T. Maruyama: ISIJ international, 2012, 52, pp. 115–20.10.2355/isijinternational.52.115 ↗
7. Y. Suzuki, T. Yamashita, Y. Sugimoto, S. Fujita, S. Yamaguchi: ISIJ international, 2009, 49, pp. 564–73.10.2355/isijinternational.49.564 ↗
8. J. Mahieu, B.C. De Cooman, S. Claessens: Metallurgical and Materials Transactions A, 2001, 32, pp. 2905–08.10.1007/s11661-001-1042-5 ↗
9. L. Cho, J.H. Oh, E.J. Seo, B.C. De Cooman: The 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2015), 2015, pp. 190–96.
10. M. Blumenau, M. Norden, F. Friedel, K. Peters: Surface and Coatings Technology, 2011, 206, pp. 559–67.10.1016/j.surfcoat.2011.07.088 ↗
11. Y. Fushiwaki, Y. Nagataki, H. Nagano, W. Tanimoto, Y. Sugimoto: ISIJ international, 2014, 54, pp. 664–70.10.2355/isijinternational.54.664 ↗
12. N. Zhong, K. Zhang, J. Li, W. Hu: steel research international, 2011, 82, pp. 180–86.10.1002/srin.201000124 ↗
13. Y.I. Choi, E.S. Shin, K. Kuroda, M. Okido, C.J. Park: Corrosion Science, 2012, 58, pp. 152–58.10.1016/j.corsci.2012.01.020 ↗
14. M. Manna, M. Dutta: Surface and Coatings Technology, 2014, 251, pp. 29–37.10.1016/j.surfcoat.2014.03.065 ↗
15. M. Blumenau, A. Barnoush, I. Thomas, H. Hofmann, H. Vehoff: Surface and Coatings Technology, 2011, 206, pp. 542–52.10.1016/j.surfcoat.2011.07.081 ↗
16. T. Van De Putte, D. Loison, J. Penning, S. Claessens: Metallurgical and Materials Transactions A, 2008, 39, pp. 2875–84.10.1007/s11661-008-9636-9 ↗
17. Z. Zhang, I. Sohn, F. Pettit, G. Meier, S. Sridhar: Metallurgical and Materials Transactions B, 2009, 40, pp. 567–84.10.1007/s11663-009-9255-x ↗
18. L. Cho, M.S. Kim, Y.H. Kim, B.C. De Cooman: Metallurgical and Materials Transactions A, 2014, 45, pp. 4484–98.10.1007/s11661-014-2394-y ↗
19. L. Cho, E.J. Seo, B.C. De Cooman: The 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2015), 2015, pp. 762–68.
20. L. Cho, E.J. Seo, G.S. Jung, D.W. Suh, B.C. De Cooman: Metallurgical and Materials Transactions A, 2016, pp. 1–15.
21. M. Seah: Journal of Catalysis, 1979, 57, pp. 450–57.10.1016/0021-9517(79)90011-3 ↗
22. E. Clauberg, C. Uebing, H. Viefhaus, H. Grabke: Surface science, 2000, 454, pp. 613–17.10.1016/S0039-6028(00)00073-X ↗
23. G. Lyudkovsky: IEEE Transactions on Magnetics, 1986, MAG-22, pp. 508–10.10.1109/TMAG.1986.1064606 ↗
24. N. Kaiser: Applied optics, 2002, 41, pp. 3053-60.10.1364/AO.41.003053 ↗
25. L. Vitos, A. Ruban, H.L. Skriver, J. Kollar: Surface Science, 1998, 411, pp. 186–202.10.1016/S0039-6028(98)00363-X ↗
26. R. Kavitha, J.R. McDermid: Surface and Coatings Technology, 2012, 212, pp. 152–58.10.1016/j.surfcoat.2012.09.038 ↗
27. A. Marder: Progress in materials science, 2000, 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
28. M. Kobashi, S. Kuno, T. Choh, T. Shimizu: ISIJ international, 1995, 35, pp. 488–93.10.2355/isijinternational.35.488 ↗
29. H. Liu, W. Chen: Ironmaking & Steelmaking, 2014, 41, pp. 19–25.10.1179/1743281212Y.0000000095 ↗
30. S.-H. Song, Z.-X. Yuan, J. Jia, D.-D. Shen, A.-M. Guo: Metallurgical and materials transactions A, 2003, 34A, pp. 1611–16.10.1007/s11661-003-0306-7 ↗