journal article·2016-11

Influence of Melt Superheat, Sr Modifier, and Al-5Ti-1B Grain Refiner on Microstructural Evolution of Secondary Al-Si-Cu Alloys

Jovid Rakhmonov, Giulio Timelli, Franco Bonollo

Publisher page

Abstract

The role of impurity elements and melt superheat on the efficiency of Sr modification, grain refinement with Al-Ti-B and the precipitation behavior of intermetallic phases in a secondary Al-7Si-3Cu-0.3Mg alloy were investigated. Metallographic and thermal analysis techniques were used to quantitatively examine the macro- and microstructural changes occurring with modifier and grain refiner additions at various pouring temperatures. The results indicate how the Sr modification and grain refinement with Al-Ti-B can be effective enough despite the presence of impurity elements in the material and the variation of pouring temperature. A slight poisonous effect of impurities, in particular, Zr and V, in the grain refinement efficiency can be eventually induced due to their action in promoting the formation of primary AlSiTi compounds. Moreover, grain refiner addition exerted a pronounced influence on the precipitation sequence of Fe-rich phases. The TiB2 particles appeared to promote the formation of Al5FeSi during solidification by acting as a favorable nucleation site.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. U. M. J. Boin and M. Bertram: JOM, 2005, vol. 57, pp. 26-33.10.1007/s11837-005-0164-4 ↗
2. A. S. J. Green: Aluminum Recycling and Processing for Energy Conservation and Sustainability, ASM International, Materials Park, Ohio, OH, 2007, pp. 125-130.
3. M. J. Caton, J. W. Jones, J. M. Boileau and J. E. Allison: Metall. Mater. Trans. A, 1999, vol. 30, pp. 3055-3068.10.1007/s11661-999-0216-4 ↗
4. M. B. Djurdjevic, I. Vicario and G. Huber: Rev. Metal., 2014, vol. 50, issue 1, pp. 1–12.10.3989/revmetalm.004 ↗
5. G. S. V. Kumar, B. S. Murty and M. Chakraborty: J. Alloys Compd., 2009, vol. 472, pp. 112-120.10.1016/j.jallcom.2008.04.095 ↗
6. M. Timpel, N. Wanderka, R. Schlesiger, T. Yamamoto, N. Lazarev, D. Isheim, G. Schmitz, S. Matsumura and J. Banhart: Acta Mater., 2012, vol. 60, pp. 3920-3928.10.1016/j.actamat.2012.03.031 ↗
7. G. Timelli, G. Camicia and S. Ferraro: J. Mater. Eng. Perform., 2014, vol. 23, pp. 611-621.10.1007/s11665-013-0757-y ↗
8. A. M. Bunn, P. Schumacher, M. A. Kearns, C. B. Boothroyd and A. L. Greer: Mater. Sci. Technol., 1999, vol. 15, pp. 1115-1123.10.1179/026708399101505158 ↗
9. J. A. Spittle and S. Sadli: Mater. Sci. Technol., 1995, vol. 11, pp. 533-537.10.1179/mst.1995.11.6.533 ↗
10. B. Zhang, M. Garro and C. Tagliano: Metall. Sci. Technol., 2003, vol. 21, pp. 3-9.
11. J. Pavlovic-Krstic: PhD Thesis, University of Magdeburg, Magdeburg, 2010, p. 150.
12. F. H. Samuel, A. M. Samuel, H. W. Doty and S. Valtierra: Metall. Mater. Trans. A, 2001, vol. 32, pp. 2061-2075.10.1007/s11661-001-0018-9 ↗
13. L. Lu and A. K. Dahle: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 819-835.
14. W. Khalifa, A. M. Samuel, F. H. Samuel, H. W. Doty and S. Valtierra: Int. J. Cast Met. Res., 2006, vol. 19, pp. 156-166.10.1179/136404606225023372 ↗
15. M. D. Ferdian: PhD thesis, Institut National Polytechnique de Toulouse, Toulouse, 2014, p. 247.
16. G. Timelli and E. Fiorese: Metall. Ital., 2011, vol. 103, pp. 9–23.
17. American Society for Testing Materials, (ASTM International: 2013), pp 9-11.
18. L. Backerud, G. Chai and J. Tamminen: Solidification Characteristics of Aluminum Alloys, vol. 2, AFS/ScanAluminium, Oslo, 1990, pp. 72-95.
19. C. Puncreobutr, A. B. Phillion, J. L. Fife, P. Rockett, A. P. Horsfield and P. D. Lee: Acta Mater., 2014, vol. 79, pp. 292-303.10.1016/j.actamat.2014.07.018 ↗
20. S. Farahany, A. Ourdjini, M. H. Idris and S. G. Shabestari: J. Therm. Anal. Calorim., 2013, vol. 114, pp. 705-717.10.1007/s10973-013-3005-7 ↗
21. D G Ibarra: PhD Thesis, McGill University, Montreal, 1999, pp. 123–28.
22. G. Timelli, G. Camicia, S. Ferraro and R. Molina: Met. Mater. Int., 2014, vol. 20, pp. 677-686.10.1007/s12540-014-4013-2 ↗
23. Q. Wang, Y. X. Li and X. C. Li: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1175-1182.10.1007/s11661-003-0137-6 ↗
24. L. Lu and A. K. Dahle: Mater. Sci. Eng. A, 2006, vol. 435, pp. 288-296.10.1016/j.msea.2006.07.081 ↗
25. H. U. Xiaowu, A. I. Fanrong and Y. Hong: Acta Metall. Sin.(Engl. Lett.), 2012, vol. 25, pp. 272-278.
26. D. Qiu, J. A. Taylor and M. X. Zhang: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3412-3421.10.1007/s11661-010-0404-2 ↗
27. W. D. Kang and H. G. Park: Korean J. Met. Mater., 2011, vol. 49, pp. 619-627.10.3365/KJMM.2011.49.8.619 ↗
28. A. L. Greer: Philos. Trans. R. Soc. London, Ser. A, 2003, vol. 361, pp. 479-494.10.1098/rsta.2002.1147 ↗
29. X. G. Chen and M. Fortier: J. Mater. Process. Technol., 2010, vol. 210, pp. 1780-1786.10.1016/j.jmatprotec.2010.06.009 ↗
30. T. E. Quested, A. T. Dinsdale and A. L. Greer: Mater. Sci. Technol., 2006, vol. 22, pp. 1126-1134.10.1179/174328406X114234 ↗
31. B. Suarez-Pena and J. Asensio-Lozano: Scripta Mater., 2006, vol. 54, pp. 1543-1548.10.1016/j.scriptamat.2006.01.029 ↗
32. T. H. Ludwig, P. L. Schaffer and L. Arnberg: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3783-3796.10.1007/s11661-013-1694-y ↗
33. A. Manente and G. Timelli: Metall. Ital., 2008, vol. 100, pp. 37-50.
34. S. Farahany, A. Ourdjini, M. H. Idris and L. T. Thai: Trans. Nonferrous Met. Soc. China, 2011, vol. 21, pp. 1455-1464.10.1016/S1003-6326(11)60881-9 ↗
35. L. M. Lu and A. K. Dahle: Light Met., 2006, pp. 807–12.
36. S. Farahany, A. Ourdjini, T. A. Abu Bakar and M. H. Idris: Thermochim. Acta, 2014, vol. 575, pp. 179-187.10.1016/j.tca.2013.11.001 ↗
37. S. Ferraro, G. Timelli and A. Fabrizi: Mater. Sci. Forum, 2013, vol. 765, pp. 59-63.10.4028/www.scientific.net/MSF.765.59 ↗
38. K. Nogita, S. D. McDonald and A. K. Dahle: Mater. Trans., 2003, vol. 44, pp. 692-695.10.2320/matertrans.44.692 ↗
39. Z. Li, A. M. Samuel, F. H. Samuel, C. Ravindran and S. Valtierra: J. Mater. Sci., 2003, vol. 38, pp. 1203-1218.10.1023/A:1022857703995 ↗
40. G. Sha, K. O’Reilly, B. Cantor, R. Hamerton and J. Worth: Mater. Sci. Forum, 2000, vol. 331, pp. 253-258.10.4028/www.scientific.net/MSF.331-337.253 ↗
41. T. Smith, K. O’Reilly, S. Kumar and I. Stone: Metall. Mater. Trans. A, 2013, vol. 44, pp. 4866-4871.10.1007/s11661-013-1934-1 ↗