Effects of Two-Stage Cold Rolling Schedule on Microstructure and Texture Evolution of Strip Casting Grain-Oriented Silicon Steel with Extra-Low Carbon
Source abstract
Abstract
A 0.27 mm-thick grain-oriented silicon steel sheet with extra-low carbon was successfully produced by a novel processing route including strip casting, normalizing, two-stage cold rolling with an intermediate annealing, primary annealing, and secondary recrystallization annealing. The evolutions of microstructure and texture along the whole processing route were investigated with a special emphasis on the effects of two-stage cold rolling schedule. It was found that Goss orientation originated in the first cold rolling due to shear banding and relatively strong Goss texture evolved through the whole thickness after intermediate annealing. This is significantly different from the results in conventional process in which the origin of Goss texture is in the hot rolling stage and Goss texture only develops below the sheet surface. Besides, it was found that cold rolling schedule had significant influences on microstructure homogeneity, evolution of λ-fiber texture in primary annealed state and, thus, on secondary recrystallization. In case of appropriate cold rolling schedule, a homogeneous microstructure with Goss texture, relatively strong γ-fiber texture and medium α-fiber texture was observed in the primary annealed strip. Although Goss texture in primary annealed state was much weaker than that in two-stage route in conventional process, a perfect secondary recrystallization microstructure was produced and the magnetic induction B8 was as high as 1.85 T. By contrast, when the cold rolling schedule was inappropriate, the primary annealed strips exhibited inhomogeneous microstructure, together with weak γ-fiber texture, medium α-fiber and λ-fiber texture. Finally, the sheets showed incomplete secondary recrystallization microstructure in which a large number of fine grains still existed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. T. Kubota, M. Fujikura, and Y. Ushigami: J. Magn. Magn. Mater., 2000, vol. 69, pp. 215–16.
2. N.P. Goss, U.S. Patent 1,965,559, 1934.10.1136/bmj.1.3820.559 ↗
3. D. Senk, C. Schneider, and R. Kopp: Steel Times Int., 1991, vol. 14, pp. 46.
4. K. Shibuya and M. Ozawa: ISIJ Int, 1991, vol. 31, pp. 661-8.10.2355/isijinternational.31.661 ↗
5. E.E.M. Luiten and K. Blok: Energy Policy, 2003, vol. 31, pp. 1339–56.10.1016/S0301-4215(02)00194-5 ↗
6. J.Y. Park, K.H. Oh, and H.Y. Ra: Scripta Mater., 1999, vol. 40, pp. 881–5.10.1016/S1359-6462(99)00044-5 ↗
7. C.G. Dunn: Cold Working of Metals, p. 113, ASM, Cleveland, 1949.
8. M. Matsuo: ISIJ Int., 1989, vol. 29, pp. 809–27.10.2355/isijinternational.29.809 ↗
9. S. Mishra, C. Darmann, and K. Lucke: Acta Metall., 1984, vol. 32, pp. 2185–201.10.1016/0001-6160(84)90161-5 ↗
10. M. Matsuo, T. Sakai, and S. Yozo: Metall. Trans., 1986, vol. 17A, pp. 1313.10.1007/BF02650112 ↗
11. A. Böttcher and K. Lücke: Acta. Metall. Mater., 1993, vol. 41, pp. 2503.10.1016/0956-7151(93)90331-L ↗
12. A.A. Kononov and B.M. Mogutnov: ISIJ Int., 1999, vol. 39, pp. 64–68.10.2355/isijinternational.39.64 ↗
13. H.T. Liu, Z.Y. Liu, Y.Q. Qiu, G.M. Cao, C.G. Li, and G. D. Wang: Mater. Charact., 2009, vol. 60, pp. 79–82.10.1016/j.matchar.2008.06.005 ↗
14. H. Liu, Z. Liu, C. Li, G. Cao, and G. Wang: Mater. Charact., 2011, vol. 62, pp. 463–8.10.1016/j.matchar.2011.02.010 ↗
15. H. Liu, Z. Liu, G. Cao, C. Li, and G. Wang: J. Magn. Magn. Mater., 2011, vol. 323, pp. 2648–51.10.1016/j.jmmm.2011.06.002 ↗
16. H.T. Liu, Z.Y. Liu, Y. Sun, Y.Q. Qiu, C.G. Li, G.M. Cao, B.D. Hong, S.H. Kim, and G.D. Wang: Mater. Lett., 2012, vol. 81, pp. 65–8.10.1016/j.matlet.2012.04.081 ↗
17. H.T. Liu, Z.Y. Liu, Y.Q. Qiu, Y. Sun, and G.D. Wang: J. Mater. Process. Technol., 2012, vol. 212, pp. 1941–45.10.1016/j.jmatprotec.2012.04.015 ↗
18. M.C. Tsai and Y.S. Hwang: J. Magn. Magn. Mater., 2010, vol. 322, pp. 2690–5.10.1016/j.jmmm.2010.04.009 ↗
19. Y. Shimizu, Y. Ito, and Y. Iida: Metall. Trans A, 1986, vol. 17A, pp. 1323–34.10.1007/BF02650113 ↗
20. C.G. Dunn: Acta Metall., 1953, vol. 1, pp. 163.10.1016/0001-6160(53)90055-8 ↗
21. S Mishra, C Darmann, and K Lucke: Metall. Trans A, 1986, vol. 17A, pp. 1301–12.10.1007/BF02650111 ↗
22. D. Dorner, S. Zaefferer, and D. Raabe: Acta Mater., 2007, vol. 55, pp. 2519–30.10.1016/j.actamat.2006.11.048 ↗
23. R. Haratani, B. Hutchinson, I.L. Dillamore, and P. Bate: Metal Sci., 1984, vol. 18, pp. 57.10.1179/030634584790420258 ↗
24. K. Ushioda and B. Hutchinson: ISIJ Int., 1989, vol. 29, pp. 862.10.2355/isijinternational.29.862 ↗
25. J.T. Park and J.A. Szpunar: Acta Mater., 2003, vol. 51, pp. 3037–51.10.1016/S1359-6454(03)00115-0 ↗
26. M.Z. Quadir and B.J. Duggan: Acta Mater., 2006, vol. 54, pp. 4337–50.10.1016/j.actamat.2006.05.026 ↗
27. K. Ushioda and W.B. Hutchinson: ISIJ Int., 1989, vol. 29, pp. 862–7.10.2355/isijinternational.29.862 ↗
28. M.D. Nave, M.R. Barnett, and H. Beladi: ISIJ Int., 2004, vol. 44, pp. 1072–8.10.2355/isijinternational.44.1072 ↗
29. H.T. Liu, Z.Y. Liu, Y. Sun, F. Gao, and G.D. Wang: Mater Lett., 2013, vol. 91, pp. 150–3.10.1016/j.matlet.2012.09.046 ↗