journal article·2014-12Open access

Crystallographic Reconstruction Study of the Effects of Finish Rolling Temperature on the Variant Selection During Bainite Transformation in C-Mn High-Strength Steels

Nicolas Bernier, Lieven Bracke, Loïc Malet, Stéphane Godet

Abstract

The effect of finish rolling temperature (FRT) on the austenite- () to-bainite () phase transformation is quantitatively investigated in high-strength C-Mn steels. In particular, the present study aims to clarify the respective contributions of the conditioning during the hot rolling and the variant selection (VS) during the phase transformation to the inherited texture. To this end, an alternative crystallographic reconstruction procedure, which can be directly applied to experimental electron backscatter diffraction (EBSD) mappings, is developed by combining the best features of the existing models: the orientation relationship (OR) refinement, the local pixel-by-pixel analysis and the nuclei identification and spreading strategy. The applicability of this method is demonstrated on both quenching and partitioning (Q&P) and as-quenched lath-martensite steels. The results obtained on the C-Mn steels confirm that the sample finish rolled at the lowest temperature (829°C) exhibits the sharpest transformation texture. It is shown that this sharp texture is exclusively due to a strong VS from parent brass {110}<1-12>, S {213} and Goss {110}<001> grains, whereas the VS from the copper {112} grains is insensitive to the FRT. In addition, a statistical VS analysis proves that the habit planes of the selected variants do not systematically correspond to the predicted active slip planes using the Taylor model. In contrast, a correlation between the Bain group to which the selected variants belong and the FRT is clearly revealed, regardless of the parent orientation. These results are discussed in terms of polygranular accommodation mechanisms, especially in view of the observed development in the hot-rolled samples of high-angle grain boundaries with misorientation axes between <111> and <110> .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. I.Y. Pyshmintsev, C. Mesplont, S. Jacobs, and B.C. De Cooman: Steel Res., 2002, vol. 73, pp. 392–402.10.1002/srin.200200005 ↗
2. I. Hlavatý, M. Sigmund, L. Krejčí, and P. Mohyla: Mater. Eng., 2009, vol. 16, pp. 44–50.
3. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd ed., IOM Communications, London, 2002.
4. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997.
5. R. Abad, B. Lopez, and I. Gutierrez: Mater. Sci. Forum., 1998, vol. 284, pp. 167–74.
6. M. Niikura, M. Fujioka, Y. Adachi, A. Matsukura, T. Yokota, Y. Shirota, and Y. Hagiwara: J. Mater. Process. Technol., 2001, vol. 117, pp. 341–46.10.1016/S0924-0136(01)00800-7 ↗
7. S. Yong, B. Hwang, S. Lee, N.J. Kim, and S. Soo: Mater. Sci. Eng. A, 2007, vol. 458, pp. 281–89.10.1016/j.msea.2006.12.097 ↗
8. M. Liebeherr, N. Bernier, D. Lèbre, N. Ilić, and D. Quidort: Proceedings of the ASME International Pipeline Conference, Calgary, 2010, p. 435.10.1115/IPC2010-31250 ↗
9. N. Sánchez Mouriño, R. Petrov, J.H. Bae, K. Kim, and L. Kestens: Adv. Eng. Mater., 2010, vol. 12, pp. 973–80.10.1002/adem.201000065 ↗
10. R.K. Ray, M.P. Butrón-Guillén, J.J. Jonas, and G.E. Ruddle: ISIJ Int., 1992, vol. 32, pp. 203–12.10.2355/isijinternational.32.203 ↗
11. L. Du, H. Yi, D. Hua, X. Liu, and G. Wang: J. Iron Steel Res. Int., 2006, vol. 13, pp. 37–39.10.1016/S1006-706X(06)60041-1 ↗
12. R.H. Larn and J.R. Yang: Mater. Sci. Eng. A., 2000, vol. 278, pp. 278–91.10.1016/S0921-5093(99)00597-3 ↗
13. A.A. Shirzadi, H. Abreu, L. Pocock, D. Klobcar, P.J. Withers, and H.K.D.H. Bhadeshia: Int. J. Mater. Res., 2009, vol. 100, pp. 40–45.10.3139/146.101789 ↗
14. W. Gong, Y. Tomota, Y. Adachi, A.M. Paradowska, J.F. Kelleher, and S.Y. Zhang: Acta Mater., 2013, vol. 61, pp. 4142–54.10.1016/j.actamat.2013.03.041 ↗
15. N. Bernier, L. Bracke, L. Malet, and S. Godet: Mater. Charact., 2014, vol. 89, pp. 23–32.10.1016/j.matchar.2013.12.014 ↗
16. A.K. De, J.G. Speer, and D.K. Matlock: Mater Sci. Forum, 2003, vol. 161, pp. 27–30.
17. B.L. Bramfitt and J.G. Speer: Metall. Trans A., 1990, vol. 21, pp. 817–29.10.1007/BF02656565 ↗
18. A. Grajcar, M. Kamińska, M. Opiela, P. Skrzypczyk, B. Grzegorczyk, and E. Kalinowska-Ozgowicz: J. Achiev. Mater. Manuf. Eng., 2012, vol. 55, pp. 256–64.
19. A.B. Greninger and A. Troiano: Trans. AIME., 1949, vol. 185, pp. 591–98.
20. G. Miyamoto, N. Takayama, and T. Furuhara: Scripta Mater., 2009, vol. 60, pp. 1113–16.10.1016/j.scriptamat.2009.02.053 ↗
21. L. Kestens and J.J. Jonas: Metalworking: Bulk Forming, vol. 14A of ASM Handbook, Materials Park, Ohio, 2005, p. 685.10.31399/asm.hb.v14a.a0004029 ↗
22. B. Hutchinson, L. Ryde, E. Lindh, and K. Tagashira: Mater. Sci Eng. A, 1998, vol. 257, pp. 9–17.10.1016/S0921-5093(98)00820-X ↗
23. R.K. Ray, J.J. Jonas, P. Butrón-Guillén, and J. Savoie: ISIJ Int., 1994, vol. 34, pp. 927–42.10.2355/isijinternational.34.927 ↗
24. H.K.D.H. Bhadeshia: Worked Examples in the Geometry of Crystals, 2nd ed., The Institute of Metals, London, 2001.
25. Y. He, S. Godet, and J.J. Jonas: Acta Mater., 2005, vol. 53, pp. 1179–90.10.1016/j.actamat.2004.11.021 ↗
26. E.C. Bain: Trans. AIME Steel Div., 1924, vol. 70, pp. 25–46.
27. B.P.J Sandvik and C.M. Wayman: Metall. Trans. A, 1986, vol. 14, pp. 809–22.10.1007/BF02644284 ↗
28. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
29. K. Wakasa and C.M. Wayman: Acta Mater., 1981, vol. 29, pp. 973–90.10.1016/0001-6160(81)90051-1 ↗
30. R.A. Lebensohn and C.N. Tomé: Mater. Sci. Eng. A, 1994, vol. 175, pp. 71–82.10.1016/0921-5093(94)91047-2 ↗
31. A. Stormvinter, G. Miyamoto, T. Furuhara, P. Hedström, and A. Borgenstam: Acta Mater., 2012, vol. 60, pp. 7265–74.10.1016/j.actamat.2012.09.046 ↗
32. L. Malet, M.R. Barnett, P.J. Jacques, and S. Godet: Scripta Mater., 2009, vol. 61, pp. 520–23.10.1016/j.scriptamat.2009.05.015 ↗
33. A.S. Taylor, P. Cizek, and P.D. Hodgson: Acta Mater., 2012, vol. 60, pp. 1548–69.10.1016/j.actamat.2011.11.048 ↗
34. N.J. Wittridge and J.J. Jonas: Acta Mater., 2000, vol. 48, pp. 2737–49.10.1016/S1359-6454(99)00460-7 ↗
35. N. Gey, B. Petit, and M. Humbert: Metall. Mater. Trans. A, 2005, vol. 36, pp. 3291–99.10.1007/s11661-005-0003-9 ↗
36. M. Sum and J.J. Jonas: Text Microstruct., 1999, vol. 31, pp. 187–215.10.1155/TSM.31.187 ↗
37. N. Takayama, G. Miyamoto, and T. Furuhara: Acta Mater., 2012, vol. 60, pp. 2387–96.10.1016/j.actamat.2011.12.018 ↗
38. N.E. Aloi, G. Krauss, D.K. Matlock, C.J. Van Tyne, and Y.W. Cheng: Proceedings of 36th Mechanical Working and Steel Processing Conference, United States, Baltimore, 1994.
39. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: Acta Mater., 2010, vol. 58, pp. 6393–403.10.1016/j.actamat.2010.08.001 ↗
40. S. Vervynckt, K. Verbeken, P. Thibaux, and Y. Houbaert: Steel Res Int., 2010, vol. 81, pp. 234–44.10.1002/srin.200900126 ↗
41. T. Furuhara, K. Kikumoto, H. Saito, T. Sekine, T. Ogawa, S. Morito, and T. Maki: ISIJ Int., 2008, vol. 48, pp. 1038–45.10.2355/isijinternational.48.1038 ↗
42. Z. Guo, C.S. Lee, and J.W. Morris: Acta Mater., 2004, vol. 52, pp. 5511–18.10.1016/j.actamat.2004.08.011 ↗
43. J.W. Morris: ISIJ Int., 2008, vol. 48, pp. 1063–70.10.2355/isijinternational.48.1063 ↗
44. A.S. Taylor, P. Cizek, and P.D. Hodgson: Acta Mater., 2011, vol. 59, pp. 5832–44.10.1016/j.actamat.2011.05.060 ↗
45. P. Cizek, F. Bai, E.J. Palmiere, and W.M. Rainforth: J. Microsc., 2005, vol. 217, pp. 138–51.10.1111/j.1365-2818.2005.01429.x ↗
46. J.H. Driver, M.C. Theyssier, and C. Maurice: Mater. Sci. Technol., 1996, vol. 12, pp. 851–58.10.1179/mst.1996.12.10.851 ↗
47. S. Kundu: Scripta Mater., 2008, vol. 58, pp. 934–36.10.1016/j.scriptamat.2007.11.047 ↗
48. H.K.D.H. Bhadeshia: ISIJ Int., 2010, vol. 50, pp. 1517–22.10.2355/isijinternational.50.1517 ↗
49. A. Stormvinter: Doctoral Thesis, Division of Physical Metallurgy, Department of Materials Science and Engineering, School of Industrial Engineering and Management, KTH Royal Institute of Technology, Stockholm, Sweden, 2012.
50. H.K.D.H. Bhadeshia and D.V. Edmonds: Metall. Trans. A, 1979, vol. 10, pp. 895–907.10.1007/BF02658309 ↗
51. B.P.J. Sandvik: Metall Trans., 1982, vol. 13, pp. 777–87.10.1007/BF02642391 ↗
52. E. Furubayashi, H. Miyaji, and M. Nobuki: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 513–19.10.2355/isijinternational1966.27.513 ↗
53. S. Kundu, A.K. Verma, and V. Sharma: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2552–65.10.1007/s11661-011-0971-x ↗
54. T. Tomida, M. Wakita, M. Yoshida, and N. Imai: Proceedings of the ICOTOM, Pittsburgh, Pennsylvania, 2008, p. 325.10.1002/9780470444191.ch36 ↗
55. T. Tomida and M. Wakita: ISIJ Int., 2012, vol. 52, pp. 601–609.10.2355/isijinternational.52.601 ↗
56. I. Lischewski and G. Gottstein: Acta Mater., 2011, vol. 59, pp. 1530–41.10.1016/j.actamat.2010.11.017 ↗
57. H. Landheer, S.E. Offerman, R.H. Petrov, and L.A.I. Kestens: Acta Mater., 2009, vol. 57, pp. 1486–96.10.1016/j.actamat.2008.11.034 ↗
58. Y. He: Doctoral Thesis, Department of Mining, Metals and Materials Engineering, McGill University, Montreal, Canada, 2005.
59. D. Raabe: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 991–98.10.1007/BF02649096 ↗
60. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: Acta Mater., 2012, vol. 60, pp. 1139–48.10.1016/j.actamat.2011.11.018 ↗
61. S. Raveendra, A.K. Kanjarla, H. Paranjape, S.K. Mishra, S. Mishra, L. Delannay, I. Samajdar, and P. Vanhoutte: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2113–24.10.1007/s11661-010-0580-0 ↗
62. A.A. Ridha and W.B. Hutchinson: Acta Mater., 1982, vol. 30, pp. 192–96.10.1016/0001-6160(82)90033-5 ↗