journal article·2010-12

Structure and Composition of Nanometer-Sized Nitrides in a Creep-Resistant Cast Austenitic Alloy

Neal D. Evans, Philip J. Maziasz, John P. Shingledecker, Michael J. Pollard

Publisher page

Abstract

The microstructure of a new and improved high-temperature creep-resistant cast austenitic alloy, CF8C-Plus, was characterized after creep-rupture testing at 1023 K (750 °C) and 100 MPa. Microstructures were investigated by detailed scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy (EDS). Principal component analysis of EDS spectrum images was used to examine the complex precipitate morphology. Thermodynamic modeling was performed to predict equilibrium phases in this alloy as well as the compositions of these phases at relevant temperatures. The improved high-temperature creep strength of CF8C-Plus over its predecessor CF8C is suggested to be due to the modified microstructure and phase stability in the alloy, including the absence of δ-ferrite in the as-cast condition and the development of a stable, slow-growing precipitation hardening nitride phase—the tetragonal Z-phase—which has not been observed before in cast austenitic stainless steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. J.P. Shingledecker, P.J. Maziasz, N.D. Evans, and M.J. Pollard: Creep Deformation and Fracture, Design, and Life Extension, Eds. R.S. Mishra, J.C. Earthman, S.V. Raj, and R. Viswanathan, MS&T Publications, Warrendale, PA, 2005, pp. 129-38.
2. J.P. Shingledecker, P.J. Maziasz, N.D. Evans, M.L. Santella, and M.J. Pollard: Energy Mater., 2006, vol. 1, pp. 25-32.10.1179/174892306X99697 ↗
3. J.P. Shingledecker, P.J. Maziasz, N.D. Evans, and M.J. Pollard: Int. J. Pres. Ves. Pip., 2007, vol. 82, pp. 21-28.10.1016/j.ijpvp.2006.09.014 ↗
4. J. Barcik: Mater. Sci. Technol., 1988, vol. 4, pp. 5-15.10.1179/mst.1988.4.1.5 ↗
5. J.P. Shingledecker, P.J. Maziasz, N.D. Evans, and M.J. Pollard: Creep Fract. High Temp. Compon. Proc. 2005, Eds. I.A. Shibli, S.R. Holdsworth, and G. Merckling, DEStech Publications, Lancaster, PA, 2005, pp. 99-109.
6. T. Sourmail: Mater. Sci. Technol., 2001, vol. 17, pp. 1-14.10.1179/026708301101508972 ↗
7. N. Saunders, X. Li, P. Miodownik, and J. Ph. Schillé: Mater. Des. Approaches Exper. Proc. Symp. 2001, Eds. J.-C. Zhao, M. Fahrmann, and T. Pollock, TMS, Warrendale, PA, 2001, pp. 185–97.
8. P.G. Kotula, M.R. Keenan, and J.R. Michael: Microsc. Microanal., 2003, vol. 9, pp. 1-17.10.1017/S1431927603030058 ↗
9. D.H. Jack and K.H. Jack: J. Iron Steel Inst., 1972, vol. 210, pp. 790-92.
10. H. Hughes: J. Iron Steel Inst., 1967, vol. 205, pp. 775-78.
11. P.W. Robinson and D.H. Jack: J. Heat Treating, 1985, vol. 4, pp. 69-74.10.1007/BF02835491 ↗
12. V. Vodárek, Scripta Metall. Mater., 1991, vol. 25, pp. 549-52.10.1016/0956-716X(91)90089-J ↗
13. R. Ayer, C.F. Klein, and C.N. Marzinsky: Metall. Trans. A, 1992, vol. 23A, pp. 2455-67.10.1007/BF02658049 ↗
14. H.K. Danielsen, J. Hald, F.B. Grumsen, and M.A.J. Somers: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2633-40.10.1007/BF02586098 ↗
15. V.G. Gavriljuk: Mater. Sci. Forum, 1999, vols. 318–320, pp. 3-12.10.4028/www.scientific.net/MSF.318-320.3 ↗
16. J. Tervo, A. Tarasenko, and H. Hänninen: Mater. Sci. Forum, 1999, vols. 318–320, pp. 41–46.10.4028/www.scientific.net/MSF.318-320.41 ↗
17. A. Strang and V. Vodárek: Mater. Sci. Tech., 1996, vol. 12, pp. 552-56.10.1179/mst.1996.12.7.552 ↗
18. A. Golpayegani, H.-O. Andrén, H. Danielsen, and J. Hald: Mat. Sci. Eng. A, 2008, vol. A489, pp. 310-18.10.1016/j.msea.2007.12.022 ↗
19. K. Sawada, H. Kushima, and K. Kimura: J. Iron Steel Inst. Japan, 2006, vol. 46, pp. 769-75.10.2355/isijinternational.46.769 ↗
20. J. Hald: Int. J. Pres. Ves. Pip., 2008, vol. 85, pp. 30-37.10.1016/j.ijpvp.2007.06.010 ↗
21. H.K. Danielsen and J. Hald: Mater. Sci. Eng. A, 2009, vol. A505, pp. 169-77.10.1016/j.msea.2008.11.019 ↗
22. H.K. Danielsen and J. Hald: CALPHAD: Comput Coupling Phase Diagrams Thermochem, Materials Park, OH, 2007, vol. 31, pp. 505–14.10.1016/j.calphad.2007.04.001 ↗
23. G. Götz and W. Blum: Mat. Sci. Eng. A, 2003, vol. A348, pp. 201-07.10.1016/S0921-5093(02)00684-6 ↗
24. K. Sawada, K. Suzuki, H. Kushima, M. Tabuchi, and K. Kimura: Mat. Sci. Eng. A, 2008, vol. A480, pp. 558-63.10.1016/j.msea.2007.09.031 ↗
25. L. Cipolla, H.K. Danielsen, D. Venditti, P.E. Di Nunzio, J. Hald, and M.A.J. Somers: Acta Mater., 2010, vol. 58, pp. 669-79.10.1016/j.actamat.2009.09.045 ↗
26. H. Uno, A. Kimura, and T. Misawa: Corrosion, 1992, vol. 48, pp. 467-74.10.5006/1.3315962 ↗
27. V. Vodárek, G. Roznovská, and J. Sobotka: Mater. Sci. Forum, 2005, vol. 282, pp. 275-78.10.4028/www.scientific.net/MSF.482.275 ↗
28. J. Erneman, M. Schwind, P. Liu, J.-O. Nilsson, H.-O. Andrén, and J. Ågren: Acta Mater., 2006, vol. 54, pp. 67-76.
29. J.-H. Shim, E. Kozeschnik, W.-S. Jung, S.-C. Lee, D.-I. Kim, J.-Y. Suh, Y.-S. Lee, and Y.W. Cho: CALPHAD, 2010, vol. 34, pp. 105-12.10.1016/j.calphad.2010.01.001 ↗
30. J.W. Martin: Micromechanisms in Particle-Hardened Alloys, Cambridge University Press, New York, NY, 1980, pp. 41-62.
31. W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals, Oxford University Press, New York, NY, 1993, pp. 56-70.
32. P.J. Maziasz, J.P. Shingledecker, N.D. Evans, and M.J. Pollard: Int. J. Pres. Ves. Pip., 2009, vol. 131, pp. 1-7.