journal article·2014-10

Effect of Annealing Temperature on Microstructure and Mechanical Properties of Bulk 316L Stainless Steel with Nano- and Micro-crystalline Dual Phases

Peiqing La, Fuan Wei, Xuefeng Lu, Chenggang Chu, Yupeng Wei, Hongding Wang

Publisher page

Abstract

Microstructures and mechanical properties of 316L stainless steels with dual phases austenite prepared by an aluminothermic reaction casting were explored. It is found that the steels consist of nano- and micro-crystalline austenite phases, a little δ ferrite and contaminations. Before and after annealing at 1073 K and 1273 K (800 °C and 1000 °C), average grain sizes of the nanocrystalline austenite phase are about 32, 31, 38 nm, respectively. Tensile strength increases first from 371 to 640 MPa and then decreases to 454 MPa. However, elongation ratio increases gradually from 16 to 23 and then 31 pct after annealing. The results illustrate that the steel after annealing at 1073 K (800 °C) has better properties, also indicating that combination of dual nano- and micro-crystalline austenite phase is conductive to improving tensile properties of materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. B. M. Zhang: Handbook of Foundry: Cast steels. Beijing: China Machine press; 2010.
2. C. K. Tongjai, A. M. Heather and A. S. Christopher: Science, 2012, vol. 7, pp. 951-54.
3. C. C. Koch: Nanostructured Materials: Processing, Properties and Applications, 2nd edition. New York, NY: William Andrew Publishing, 2007.
4. M. A. Meyers, A. Mishra and D. J. Benson: Prog. Mater. Sci., 2006, vol. 51, pp. 427-556.10.1016/j.pmatsci.2005.08.003 ↗
5. V. M. Segal, S. Ferrasse and F. Alford: Mater. Sci. Eng: A., 2006, vol. 422, pp.321-26.10.1016/j.msea.2006.02.016 ↗
6. Y. J. Kimura, T. Inoue, F. X. Yin and K. Tsuzaki: Science, 2008, vol. 320, pp. 1057-60.10.1126/science.1156084 ↗
7. D. Jia, Y. M. Wang, K.T. Ramesh and E. Ma: Appl. Phys. Lett., 2001, vol. 79, pp. 611-13.10.1063/1.1384000 ↗
8. Y.T Zhu and X. Z. Liao: Nat. Mater., 2004, vol. 3, pp. 351-352.10.1038/nmat1141 ↗
9. Z. Budrovic, H. Van. Swygenhoven, P. M. Derlet, S.V. Petegem and B. Schmitt: Science, 2004, vol. 304, pp. 273-76.10.1126/science.1095071 ↗
10. Y. M. Wang, M. W. Chen, F. H. Zhou and E. Ma: Nature, 2002, vol. 419, pp. 912-15.10.1038/nature01133 ↗
11. D. Witkin, Z. Lee, R. Rodr ´ıguez, S. Nutt and E. Lavernia: Scr. Mater., 2003, vol. 49, pp. 297-302.10.1016/S1359-6462(03)00283-5 ↗
12. J. Gil. Sevillano and J. Aldazabal: Scr. Mater., 2004, vol. 51, pp. 795-800.10.1016/j.scriptamat.2004.05.015 ↗
13. Y. M. Wang and E. Ma: Acta Mater., 2004, vol. 52, pp. 1699-1709.10.1016/j.actamat.2003.12.022 ↗
14. H. Jin and D. J. Lloyd: Metall. Mater. Trans. A., 2004, vol. 35, pp. 997-1006.10.1007/s11661-004-1003-x ↗
15. P. Q. La, F. A. Wei, S. L. Hu, C. L. Li and Y. P. Wei: Mater. Sci. Eng: A., 2013, vol. 561, pp. 317-320.10.1016/j.msea.2012.10.002 ↗
16. P. Q. La, J. Yang, D. J. H. Cockayne, W. M. Liu, Q. J. Xue and Y. D. Li: Adv. Mater., 2006, vol. 18, pp. 733-737.10.1002/adma.200501684 ↗
17. P. Q. La, Y. P. Wei, R. J. Lv, Y. Zhao and Y. Yang: Mater. Sci. Eng: A., 2010, vol. 527, pp. 2313-19.10.1016/j.msea.2009.12.043 ↗
18. P. Q. La, D. Zhang, D. L. Ma, Y. P. Wei, H. D. Wang and X. F. Lu: J. Self Propag. High Temp. Synth., 2012, vol. 21, pp. 89-97.10.3103/S1061386212020069 ↗
19. P. Q. La, X. F. Lu, Y. Yang, Y. P. Wei and Y. Zhao: Mater. Sci. Technol., 2011, vol. 27, pp. 1303-08.10.1179/026708310X12738371693094 ↗
20. G. E. Dieter: Mechanical Metallurgy, 3rd edition. Beijing: Tsinghua University press; 2006.
21. I. Shuro, H. H. Kuo, Y. Todaka and M. Umemoto: J. Mater. Sci., 2012, vol. 47, pp. 8128-33.10.1007/s10853-012-6708-4 ↗
22. Z. Shan, E. A. Stach, J. M. K. Wiezorek, J. A. Knapp, D. M. Follstaedt and S. X. Mao: Science, 2004, vol. 305, pp. 654-57.10.1126/science.1098741 ↗
23. C. C. Koch, R. O. Scattergood, M. Saber and H. Kotan: J. Mater. Res., 2013, Vol. 28, pp. 1785-1791.10.1557/jmr.2012.429 ↗
24. W. F. Smith: Foundations of Materials Science and Engineering. Beijing: China Machine press; 2010.