journal article·2015-01

Liquation Cracking in Arc and Friction-Stir Welding of Mg-Zn Alloys

Dustin C. Wagner, Xiao Chai, Xin Tang, Sindo Kou

Publisher page

Abstract

As compared to Al alloys, which are known to be susceptible to liquation (i.e., liquid formation) and liquation-induced cracking, most Mg alloys have a lower eutectic temperature and thus are likely to be even more susceptible. The present study was conducted to study liquation and liquation cracking in Mg alloys during arc welding and friction-stir welding (FSW). Binary Mg-Zn alloys were selected as a model material in view of their very low eutectic temperature of 613 K (340 °C). Mg-Zn alloys with 2, 4, and 6 wt pct of Zn were cast and welded in the as-cast condition by both gas-tungsten arc welding (GTAW) and FSW. A simple test for liquation cracking was developed, which avoided interference by solidification cracking in the nearby fusion zone. Liquation and liquation cracking in GTAW were found to be in the decreasing order of Mg-6Zn, Mg-4Zn, and Mg-2Zn. Liquation cracking occurred in FSW of Mg-6Zn but not Mg-4Zn or Mg-2Zn. Instead of a continuous ribbon-like flash connected to the weld edge, small chips, and powder covered the weld surface of Mg-6Zn. The results from GTAW and FSW were discussed in light of the binary Mg-Zn phase diagram and the curves of temperature vs fraction solid during solidification.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. H. Watarai: Q. Rev, 2006, vol.18, pp 84-97.
2. USAMP, United States Automotive Materials Partnership—A Consortium of the United States Council for Automotive Research, MG 2020, released 11, 1, 2006, pp. 1–34.
3. M.K. Kulekci: Int. J. Adv. Manuf. Tech., 2008, vol. 39, pp. 851–65.10.1007/s00170-007-1279-2 ↗
4. J. Feng, Y. Wang, and Z. Zhang: 2005. Chin. J. Nonferr. Met., 2005, vol. 15, pp. 165–178 (in Chinese).
5. G.H. Deinzer and M. Rethmeier: in Magnesium Technology—Metallurgy, Design Data and Applications, H.E. Friedrich and B. L. Mordike, eds., Springer, Secaucus, 2006, pp. 349–63.
6. X. Cao, M. Jahazi, J.P. Immarigeon, and W. Wallace: J. Mat. Proc. Tech., 2006, vol. 171, pp. 188-204.10.1016/j.jmatprotec.2005.06.068 ↗
7. Liu, L: Welding and Joining of Magnesium Alloys. Woodhead Publishing, Cambridge, UK, 2012.
8. K.E. Prasad, B. Li, N. Dixit, M. Shaffer, S.N. Mathaudhu, and K.T. Ramesh: JOM, 2014, vol. 66, pp. 291-304.10.1007/s11837-013-0850-6 ↗
9. S. Kou, Welding Metallurgy, 2nd ed., John Wiley and Sons, Hoboken, NJ, 2003, pp. 301-340.
10. S. Kou: Weld. J., 2012, vol. 91, pp. 287s-302s.
11. C. Huang and S. Kou: Weld. J., 2000, vol. 79, pp. 113s-120s.
12. C. Huang and S. Kou: Weld. J., 2002, vol. 81, pp. 211s-222s.
13. C. Huang and S. Kou: Weld. J., 2001, vol. 80, pp. 46s-53s.
14. C. Huang and S. Kou, Weld. J., 2001, vol. 80, pp. 9s-17s.
15. C. Huang and S. Kou: Weld. J., 2004, vol. 83, pp. 50s-58s.
16. C. Huang and S. Kou: Weld. J., 2004, vol. 83, pp. 111s-122s.
17. S. Kou, V. Firouzdor, and I. Haygood: in Hot Cracking Phenomena in Welds III, J.C. Lippold, Th. Böllinghaus, and C.E. Cross, eds., Springer, Berlin, 2011, pp. 3–23.10.1007/978-3-642-16864-2_1 ↗
18. G. Cao and S. Kou: Weld. J., 2006, vol. 85, pp. 9s-18s.
19. A. Munitz, C. Cotler, A. Stern, and G. Kohn: Mater. Sci. Eng. A, 2001, vol. 302, pp. 68-73.10.1016/S0921-5093(00)01356-3 ↗
20. T. Zhu, Z.W. Chen and W. Gao: Mater. Sci. Eng. A, 2006, vol. 416, pp. 246-52.10.1016/j.msea.2005.10.032 ↗
21. T. Zhu, Z.W. Chen and W. Gao: Mater. Charact., 2008, vol.59, pp.1550-58.10.1016/j.matchar.2008.01.022 ↗
22. W. Zhou, T.Z. Long and C.K. Mark: Mater. Sci. Tech., 2007, vol. 23, pp. 1294-99.10.1179/174328407X213026 ↗
23. D.X. Sun, D.Q. Sun, X.Y. Gui and Z.Z. Xuan: ISIJ Int., 2009, vol. 49, pp. 270-74.10.2355/isijinternational.49.270 ↗
24. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple-Smith, and C.J. Dawes: International Patent Application No. PCT/GB92, Patent Application No. 9125978.8, December 6, 1991.
25. S. Song, S. Lee, B. Kim, T. Yoon, N. Kim, I. Kim and C. Kang. Mater. Trans., 2011, vol. 52, pp. 254-57.10.2320/matertrans.M2010343 ↗
26. J. Yan, M.A. Sutton, and A.P. Reynolds: 5th Int. FSW Sympos., Metz, France, 14–16 September, 2004.
27. A.P. Gerlich and T. Shibayanagi: Sci. Technol. Weld. Join., 2011, vol.16, pp. 295-99.10.1179/1362171811Y.0000000005 ↗
28. V. Firouzdor and S. Kou: Metall. Mater. Trans. A, 2010, vol. 41, pp. 2914-2935.10.1007/s11661-010-0340-1 ↗
29. V. Firouzdor and S. Kou: Metall. Mater. Trans. A, 2010, vol. 41, pp. 3238-3251.10.1007/s11661-010-0366-4 ↗
30. V. Firouzdor and S. Kou: Weld. J., 2009, vol. 88, pp. 213s-224s.
31. A. Gerlich, M. Yamamoto and T.H. North: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 472-80.10.1179/174329307X213873 ↗
32. A. Gerlich, P. Su and T.H. North: Sci. Technol. Weld. Join., 2005, vol.10, pp. 647-52.10.1179/174329305X48383 ↗
33. M. Yamamoto, A. Gerlich, T.H. North and K. Shinozaki: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 208-16.10.1179/174329307X177900 ↗
34. M. Yamamoto, A. Gerlich, T.H. North and K. Shinozaki: J. Mater. Sci., 2007, vol. 42, pp. 7657-66.10.1007/s10853-007-1662-2 ↗
35. Y.K. Yang, H. Dong, H. Cao, Y.A. Chang and S. Kou: Weld. J., 2008, vol. 87, pp. 167s-177s.
36. X. Gao and J.F. Nie: Scr. Mater., 2007, vol. 57, pp. 655-58.10.1016/j.scriptamat.2007.06.005 ↗
37. J. Buha: Mater. Sci. Eng. A, 2008, vol. 492, pp. 11-19.10.1016/j.msea.2008.02.038 ↗
38. X. Gao and J.F. Nie: Scr. Mater., 2007, vol. 56, pp. 645-48.10.1016/j.scriptamat.2007.01.006 ↗
39. H. Somekawa, A. Sigh and T. Mukai Scr. Mater., 2006, vol. 55, pp. 593-96.10.1016/j.scriptamat.2006.06.013 ↗
40. H. Somekawa, A. Sigh and T. Mukai: Scr. Mater., 2009, vol. 60, pp. 411-14.10.1016/j.scriptamat.2008.11.017 ↗
41. D.Y. Maeng,, T.S. Kim, J.H. Lee, S.J. Hong, S.K. Seo, and B.S. Chun: Scr. Mater., 2000, vol. 43, pp. 358-89.10.1016/S1359-6462(00)00428-0 ↗
42. L.Y. Wei, G.L. Dunlop, and H. Westengen: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1947-55.10.1007/BF02670666 ↗
43. M. De Cicco, H. Konishi, G. Gao, H.S. Choi, L.S. Turng, J.H. Perepezko, S. Kou, R. Lakes, and X. Li: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3038-45.10.1007/s11661-009-0013-0 ↗
44. S. Zhang, X. Zhang, C. Zhao, J. Li, Y. Song, C. Xie, H. Tao, Y. Zhang, Y. He, Y. Jiang, and Y. Bian: Acta Biomater., 2010, vol. 6, pp. 626-40.10.1016/j.actbio.2009.06.028 ↗
45. Z.H. Yu, H.G. Yan, J.H. Chen, and Y.Z. Wu: J. Mater. Sci., 2010, vol. 45, pp. 3797-3803.10.1007/s10853-010-4434-3 ↗
46. G.M. Xie, Z.Y. Ma and L. Geng: Mater. Sci. Eng. A, 2008, vol. 486, pp. 49–55.10.1016/j.msea.2007.08.043 ↗
47. G. Cao and S. Kou: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3647-63.10.1007/s11661-006-1059-x ↗
48. T.B. Massalski, ed.: Binary Alloy Phase Diagrams, American Society for Metals, Metals Park, OH, 1986, p. 1565.
49. J.B. Clark, L. Abdyr, and Z. Moser: Mg-Zn (Magnesium-Zinc) Binary Alloy Phase Diagrams, T.B. Massalski, ed., 2nd ed., vol. 3, 1990, pp. 2571–72.
50. G. Cao and S. Kou: Weld. J., 2005, vol. 84, pp. 63s-71s.
51. Pandat: Phase Diagram Calculation Software Package for Multicomponent Systems, Computherm LLC, Madison, WI, 2001.
52. PanMagnesium: Thermodynamic Database for Magnesium Alloys, Computherm LLC, Madison, WI, 2001.
53. W. Yuan, R.S. Mishra, B. Carlson, R. Verma and R.K. Mishra, Mater. Sci. Eng. A, 2012, vol. 543, pp. 200-209.10.1016/j.msea.2012.02.075 ↗