On Porosity Formation in Metal Matrix Composites Made with Dual-Scale Fiber Reinforcements Using Pressure Infiltration Process
Source abstract
Abstract
This is the first such study on porosity formation phenomena observed in dual-scale fiber preforms during the synthesis of metal matrix composites (MMCs) using the gas pressure infiltration process. In this paper, different mechanisms of porosity formation during pressure infiltration of Al-Si alloys into Nextel™ 3D-woven ceramic fabric reinforcements (a dual-porosity or dual-scale porous medium) are studied. The effect of processing conditions on porosity content of the ceramic fabric infiltrated by the alloys through the gas PIP (PIP stands for “Pressure Infiltration Process” in which liquid metal is injected under pressure into a mold packed with reinforcing fibers.) is investigated. Relative density (RD), defined as the ratio of the actual MMC density and the density obtained at ideal 100 pct saturation of the preform, was used to quantify the overall porosity. Increasing the infiltration temperature led to an increase in RD due to reduced viscosity of liquid metal and enhanced wettability leading to improved feedability of the liquid metal. Similarly, increasing the infiltration pressure led to enhanced penetration of fiber tows and resulted in higher RD and reduced porosity. For the first time, the modified Capillary number (Ca*), which is found to predict formation of porosity in polymer matrix composites quite well, is employed to study porosity in MMCs made using PIP. It is observed that in the high Ca* regime which is common in PIP, the overall porosity shows a strong downward trend with increasing Ca*. In addition, the effect of matrix shrinkage on porosity content of the samples is studied through using a zero-shrinkage Al-Si alloy as the matrix; usage of this alloy as the matrix led to a reduction in porosity content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Parnas, R.S. and J.F.R. Phelan, SAMPE Quarterly, 1990. 22(2): p. 53-60.
2. W.P. Benjamin and S.W. Beckwith, eds.: Resin Transfer Molding, SAMPE Monograph No. 3. 1999, SAMPE, USA.
3. S. Suresh, A. Mortensen, and A. Needleman (1993) Fundamentals of Metal-Matrix Composites. Butterworth-Heinemann, Stoneham.
4. Tan, H. and K.M. Pillai, Composites: Part A, 2012. 43: p. 1-13.10.1016/j.compositesa.2010.12.013 ↗
5. Pillai, K.M., J. Compos. Mater., 2004. 28(23): p. 2097-118.10.1177/0021998304045585 ↗
6. Chan AW, Morgan RJ (1993) Polym. Compos. 74:335-40.10.1002/pc.750140409 ↗
7. Binetruy, C., B. Hilaire, and J. Pabiot, J. Compos. Mater., 1998. 32(3): p. 223–45.10.1177/002199839803200302 ↗
8. Y.D. Parseval, K.M. Pillai, and S.G. Advani: Transp. Porous Media, 1997, vol. 27, p. 243.10.1023/A:1006544107324 ↗
9. J. Bréard, Y. Henzel, F. Trochu, and R. Gauvin: Polym. Compos., 2003, vol. 24 (3), pp. 391–408.10.1002/pc.10038 ↗
10. Babu, B.Z. and K.M. Pillai, J. Compos. Mater., 2004. 38(1): p. 57-79.10.1177/0021998304038176 ↗
11. Tan, H., T. Roy, and K.M. Pillai, Compos. A, 2007. 38(8): p. 1872-92.10.1016/j.compositesa.2007.04.002 ↗
12. Lekakou, C. and M.G. Bader, Compos. A, 1998. 29(1-2): p. 29-37.10.1016/S1359-835X(97)00030-4 ↗
13. Dessenberger, R.B. and C.L. Tucker, Polym. Compos., 1995. 16(6): p. 495-506.10.1002/pc.750160608 ↗
14. Chan, A.W. and R.J. Morgan, Polym. Compos., 1993. 14(4): p. 335–40.10.1002/pc.750140409 ↗
15. Pillai, K.M. and S.G. Advani, J. Compos. Mater., 1998. 32(19): p. 1753-83.10.1177/002199839803201902 ↗
16. Pillai K.M. (2004) Compos. Mater. 38:2097-2118.10.1177/0021998304045585 ↗
17. Patel, N., V. Rohatgi, and L.J. Lee, Polym. Eng. Sci., 1995. 35(10): p. 837–51.10.1002/pen.760351006 ↗
18. T.S. Lundstorm: Void Formation and Transport in RTM, 1993, Swedish Institute Of Composites.10.1177/073168449301201207 ↗
19. R.C. Peterson and R.E. Robertson: in Proceedings of the 8th Advanced Composites Conference, 1992, Chicago, IL.
20. Chen, Y.T., H.T. Davis, and C.W. Macosko, AIChE J., 1995. 41(10): p. 2261–73.10.1002/aic.690411009 ↗
21. Lundström, T.S. and B.R. Gebart, Polym. Compos., 1994. 15(1): p. 25-33.10.1002/pc.750150105 ↗
22. Chen YT, Macosko C, HT Davis (1995) AIChE J. 41: 2274–81.10.1002/aic.690411010 ↗
23. Rohatgi, V., N. Patel, and L.J. Lee, Polym. Compos., 1996. 17(2): p. 161-70.10.1002/pc.10601 ↗
24. L. Fong and S.G. Advani: in Proceedings of International Conference on Composite Engineering ICCE, 1994, p. 301.
25. Chang, C.Y. and L.W. Hourng, J. Reinf. Plast. Compos., 1998. 17(2): p. 165–82.10.1177/073168449801700206 ↗
26. Lin, M., H.T. Hahn, and H. Huh, Compos A, 1998. 29(5-6): p. 541–50.10.1016/S1359-835X(97)00126-7 ↗
27. Mohan, R.V., N.D. Ngo, and K.K. Tamma, Polym. Eng. Sci. 1999. 39(1): p. 26–43.10.1002/pen.11394 ↗
28. Patel, N. and L.J. Lee, Polym. Compos., 1996. 17(1): p. 96-103.10.1002/pc.10594 ↗
29. Patel, N. and L.J. Lee, Polym. Compos., 1996. 17(1): p. 104–14.10.1002/pc.10595 ↗
30. K.M. Pillai and S.G. Advani: in Proceedings of the 1996 ASME International Mechanical Engineering Congress and Exhibition, 1996.
31. W. K. Chui, J. Glimm, F.M. Tangerman, A.P. Jardine, J.S. Madsen, T.M. Donnellan, and R. Leek, SlAM REV., 1997. 39(4): p. 714–27.10.1137/S0036144596308546 ↗
32. Mortensen, A., Compr. Compos., 2000. 3: p. 521–54.10.1016/B0-08-042993-9/00019-X ↗
33. A. Mortensen, L.J. Masur, J.A. Cornie, M.C. Flemings, Metall. Trans. A, 1989. 20(11): p. 2535–47.10.1007/BF02666688 ↗
34. Wang B., Pillai K.M. (2013) Metall. Mater. Trans. A, 44A: 5834–52.10.1007/s11661-013-1955-9 ↗
35. Samuel, A.M., H. Liu, and F.H. Samuel, J. Mater. Sci., 1993. 28(24): p. 6785–98.10.1007/BF00356432 ↗
36. Aqida S.N., Ghazali M.I., Hashim J. (2004) Jurnal Teknologi 40(1):17-32.10.11113/jt.v40.395 ↗
37. A. Mortensen, M.N. Gungor, J.A. Cornie, M.C. Flemings, JOM, 1986. 38(3): p. 30-35.10.1007/BF03257892 ↗
38. Chou, T.W., A. Kelly, and A. Okura, Composites, 1985. 16(3): p. 187-206.10.1016/0010-4361(85)90603-2 ↗
39. Flemings MC (1974) Solidification Processing. McGraw-Hill, New York10.1007/BF02643923 ↗
40. Ray, S., J. Mater. Sci., 1993. 28(20): p. 5397-5413.10.1007/BF00367809 ↗
41. Emadi, D., J.E. Gruzleski, and J.M. Toguri, Metall. Trans. B, 1993. 24B: p. 1055-63.10.1007/BF02660997 ↗
42. EmamyGhomy M, Campbell J (1995) Cast Metals 8(2):115-22.10.1080/09534962.1995.11819199 ↗
43. Ilegbusi, O. and J. Yang, Metall. Mater. Trans. A, 2000. 31A: p. 2069-74.10.1007/s11661-000-0234-8 ↗
44. Samuel, A.M., A. Gotmare, and F.H. Samuel, Compos. Sci. Technol. 1995. 53: p. 301-15.10.1016/0266-3538(95)00001-1 ↗
45. Long, S., Z. Zhang, and H.M. Flower, Acta Metall. Mater., 1994. 42(4): p. 1389-97.10.1016/0956-7151(94)90157-0 ↗
46. Mortensen, A. and J.A. Cornie, Metall. Trans. A, 1987. 18A: p. 1160-63.10.1007/BF02668570 ↗
47. Asthana R (1997) Solidification Processing of Reinforced Metals. Transtech Publishers, Switzerland, 46.
48. Ilegbusi, O. and J. Yang, J. Mater. Process. Manuf. Sci., 1999. 8(2): p. 106-12.10.1106/3YUR-WEPP-KK8N-2JTH ↗
49. Calin, R., M. Pul, and Z.O. Pehlivanli, J. Mater. Res., 2012. 15(6): p. 1057-63.10.1590/S1516-14392012005000131 ↗
50. Liu, T.M. and C.G. Chao, Mater. Sci. Eng., 1993. 169: p. 79-84.10.1016/0921-5093(93)90600-J ↗
51. B.S. Kang, C.W. Won, B.S. Chun, and H.Y. Sohn, J. Mater. Sci., 1995. 30(15): p. 3883-87.10.1007/BF01153950 ↗
52. Rajan, T.P.D., R.M. Pillai, and B.C. Pai, J. Mater. Sci. 1998. 35: p. 3491-3503.10.1023/A:1004674822751 ↗
53. Garcia-Cordovillaa, C., E. Louis, and J. Narcisoc, Acta Mater., 1999 47(18): p. 4461–79.10.1016/S1359-6454(99)00318-3 ↗
54. R.A. Donahue, F. Church, and R.L. Bebee: in US Patent Documents, U.S. patent, 1990.
55. M.H. Mohamed, A.E. Bogdanovich, I. Habil, L.C. Dickinson, SAMPE J, 2001. 37(3): p. 8-17.
56. A.J. Wheeler and A.R. Ganji: Introduction to Engineering Experimentation, Prentice Hall, 2010.
57. Suresh S, Mortensen A, Needleman A (1993) Fundamentals of Metal Matrix Composites. Butterworth-Heinemann, Boston.
58. Asthana R, Rohatgi PK, Tewari SN (1992) Process. Adv. Mater. 2:1-17.
59. Patel, N. and L.J. Lee, Polym. Compos., 1995. 16(5): p. 386-99.10.1002/pc.750160507 ↗
60. Overfelt RA, Wang D (2002) Int. J. Thermophys. 23:1063-76.10.1023/A:1016342120174 ↗
61. Schoutens, J.E., J. Mater. Sci., 1989. 24(8): p. 2681-86.10.1007/BF02385611 ↗
62. Campbell J (2011) Complete Casting Handbook—Metal Casting Processes, Metallurgy, Techniques and Design. Elsevier, Amsterdam
63. Papathanasiou TD (2001) Int. J. Multiph. Flow 27(8): 1451–61.10.1016/S0301-9322(01)00013-1 ↗