Electron Beam Powder Bed Fusion of ATI C103TM Refractory Alloy
Source abstract
Abstract
Abstract The study investigated the use of electron beam powder bed fusion (EB-PBF) to fabricate niobium ATI C103™ alloy articles for microstructural characterization and mechanical testing. The feedstock powder was consolidated into low-porosity articles, and both powder and sample chemistry were monitored. Oxygen uptake in the powder was limited to less than the ASTM B655/B655M (2018) specification limits for 7 uses. Manipulating vacuum chamber pressure showed stable hafnium content but decreasing titanium content with decreasing chamber pressure attributed to evaporation. AM samples were evaluated in the post-processed, as-fabricated, annealed, and hot isostatic pressing (HIP) condition with a maximum yield strength of 287 MPa, UTS of 375 MPa for the HIP, and maximum elongation of 32 pct for the annealed specimens, respectively. Mechanical properties are similar to typical wrought products, with a notable increase in yield strength after post-processing by HIP. The fracture behavior was driven by porosity in the as-fabricated specimens and grain boundary fracture after HIP.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. R.H. Cooper, E.E. Hoffman, Dairies, et al.: Refractory Alloy Technology for Space Nuclear Power Applications, 1984, p. 285.
2. A. Grant, Jr, and D. Lee: Evolution of the small rocket engine, in 4th Annual Meeting and Technical Display, 1967, October, p. 982.10.2514/6.1967-982 ↗
3. R. Stechman, and R. Lynch: Space Shuttle reaction control thruster, in 10th Propulsion Conference, 1974, October, p. 1109.10.2514/6.1974-1109 ↗
4. C. Drenning, R. Phillips, R. Loustau, and F. Falconer: Design and fabrication of Space Shuttle reaction control thruster insulated scarf nozzles, in 14th Joint Propulsion Conference, 1978, p. 1006.10.2514/6.1978-1006 ↗
5. I. Machlin, R.T. Begley, E.D. Weisert, eds.: Refractory Metal Alloys Metallurgy and Technology: Proceedings of a Symposium on Metallurgy and Technology of Refractory Metals Held in Washington, D.C., April 25–26, 1968, Springer US, Boston, MA. https://doi.org/10.1007/978-1-4684-9120-3.10.1007/978-1-4684-9120-3 ↗
6. J. Hebda, and W. Chang: Niobium alloys and high temperature applications, in Niobium Science & Technology: Proceedings of the International Symposium Niobium, 2001, vol. 2001.
7. T.G. Nieh, and J. Wadsworth: Recent advances and developments in refractory alloys, in MRS Online Proceedings Library, vol. 322, pp. 315–327, 1993. https://doi.org/10.1557/PROC-322-31510.1557/PROC-322-315 ↗
8. N.R. Philips, M. Carl, and N.J. Cunningham: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 3299–310. https://doi.org/10.1007/s11661-020-05803-3.10.1007/s11661-020-05803-3 ↗
9. O. Mireles, O. Rodriguez, Y. Gao, and N. Philips, Additive Manufacture of Refractory Alloy C103 for Propulsion Applications, AIAA 2020-3500. AIAA Propulsion and Energy 2020 Forum August 2020. https://doi.org/10.2514/6.2020-3500.10.2514/6.2020-3500 ↗
10. P.D. Awasthi, et al.: Mater. Sci. Eng. A, 2022, vol. 831, p. 142183.10.1016/j.msea.2021.142183 ↗
11. O. Mireles, et al.: Refractory Alloy Additive Manufacture Build Optimization (RAAMBO). Joint Army-Navy-NASA-Air Force (JANNAF) Liquid Propulsion Subcommittee (LPS), 2022.
12. O. Mireles: Additive manufacture of refractory metals for aerospace applications, in AIAA Propulsion and Energy 2021 Forum, 2021, p. 3234.10.2514/6.2021-3234 ↗
13. P. Gradl and O. Mireles: Additive manufacturing (AM) for propulsion component and system applications. Team Redstone Additive Manufacturing IPT Meeting.
14. C.C. Wojcik: MRS Online Proc. Libr. (OPL), 1993, vol. 322, p. 519.10.1557/PROC-322-519 ↗
15. C.C. Wojcik: Adv. Mater. Processes, 1998, vol. 154(6), pp. 27–31.
16. L.J. Pionke, and J.W. Davis: Technical assessment of niobium alloys data base for fusion reactor applications (No. COO-4247-2). McDonnell Douglas Astronautics Co., St. Louis, MO (USA), 1979.10.2172/5419637 ↗
17. B. Colon, K.I. Watanabe, T.J. Hobbs, C.J. Romnes, O.R. Mireles, L. Murr, and F. Medina: Parameter Development and Characterization of Laser Powder Directed Energy Deposition (LP-Ded) of Nb-Alloy C103 for Thin Wall Geometries. Available at SSRN 4713488.
18. C. Körner: Int. Mater. Rev., 2016, vol. 61(5), pp. 361–77.10.1080/09506608.2016.1176289 ↗
19. W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, and S.S. Babu: Int. Mater. Rev., 2016, vol. 61(5), pp. 315–60.10.1080/09506608.2015.1116649 ↗
20. T.E. Tietz and J.W. Wilson: Behavior and Properties of Refractory Metals, Stanford University Press, Stanford, 1965.
21. T. Horn, and D. Gamzina: Additive manufacturing of copper and copper alloys. Additive Manufacturing Processes; Bourell, DL, Frazier, W., Kuhn, H., Seifi, M., eds., 2020, pp. 388–41810.31399/asm.hb.v24.a0006579 ↗
22. P. Nandwana, W.H. Peter, R.R. Dehoff, L.E. Lowe, M.M. Kirka, F. Medina, and S.S. Babu: Recyclability Study on Inconel 718 and Ti-6Al-4V Powders for Use in Electron Beam Melting. Metallurgical and Materials Transactions B 47, no. 1 (February 1, 2016), pp. 754–62. https://doi.org/10.1007/s11663-015-0477-9.10.1007/s11663-015-0477-9 ↗
23. C. Ledford, C. Rock, P. Carriere, P. Frigola, D. Gamzina, T. Horn: Characteristics and processing of hydrogen-treated copper powders for EB-PBF additive manufacturing, Appl. Sci.
24. M.M. Collur, A. Paul, and T. DebRoy: Metall. Trans. B, 1987, vol. 18, pp. 733–40.10.1007/BF02672891 ↗
25. G.M. Mladenov and P.I. Petrov: Mater. Manuf. Processes, 1999, vol. 14(3), pp. 331–45.10.1080/10426919908914831 ↗
26. A. Block-Bolten and T.W. Eagar: Metall. Trans. B, 1984, vol. 15, pp. 461–69.10.1007/BF02657376 ↗
27. A. Klassen, T. Scharowsky, and C. Körner: J. Phys. D Appl. Phys., 2014, vol. 47(27), p. 275303.10.1088/0022-3727/47/27/275303 ↗
28. A. Klassen, V.E. Forster, V. Juechter, and C. Körner: J. Mater. Process. Technol., 2017, vol. 247, pp. 280–88.10.1016/j.jmatprotec.2017.04.016 ↗
29. T.R. Mahale: Electron beam melting of advanced materials and structures, PhD thesis, North Carolina State University, 2009.
30. J. Jackson, and R. Rice: Preliminary Material Properties Handbook, vol. 1. Air Force Research Laboratory2019, 2000, vol. 9(19), p. 3993. https://doi.org/10.3390/app9193993.10.3390/app9193993 ↗
31. C. Ledford, M. Tung, C. Rock, and T. Horn: Addit. Manuf., 2020, vol. 34, Art. No. 101365. https://doi.org/10.1016/j.addma.2020.101365.10.1016/j.addma.2020.101365 ↗
32. A. Lawley, Atomization, The Production of Metal Powder, Metal Powder Industries Foundation, Princeton, New Jersey, 1992.
33. R. German, Powder Metallurgy & Particulate Materials Processing, Metal Powder Industries Foundation, Princeton, New Jersey, 2005.
34. ASTM International: B655/B655M-10(2018) Standard Specification for Niobium-Hafnium Alloy Bar and Wire, ASTM International, West Conshohocken, PA, 2018.
35. H.P. Tang, M. Qian, N. Liu, et al.: JOM, 2015, vol. 67, pp. 555–63. https://doi.org/10.1007/s11837-015-1300-4.10.1007/s11837-015-1300-4 ↗
36. E.R. Honig: Vapor Pressure Data for the Solid and Liquid Elements. RCA Review 23, no. 12, 1962, p. 567.
37. R.E. Honig, and D.A. Kramer: Vapor Pressure Data for the Solid and Liquid Elements, RCA Laboratories” David Sarnoff Research Center, 1969.
38. Y.S. Lee, et al.: Simulation of spot melting scan strategy to predict columnar to equiaxed transition in metal additive manufacturing, in 2017 International Solid Freeform Fabrication Symposium, University of Texas at Austin, 2017.
39. P. Agrawal, S. Gupta, S. Thapliyal, and S. Shukla: Addit. Manuf., 2021, vol. 37, p. 101623. https://doi.org/10.1016/j.addma.2020.101623.10.1016/j.addma.2020.101623 ↗
40. M.M. Kirka, P. Nandwana, Y. Lee, R.R. Dehoff: Scr. Mater., 135 (2017), pp. 130–34. https://doi.org/10.1016/j.scriptamat.2017.01.0010.1016/j.scriptamat.2017.01.00 ↗
41. Unpublished data N. Phillips.
42. H. Zhao, D.R. White, and T. DebRoy: Int. Mater. Rev., 1999, vol. 44, p. 238.10.1179/095066099101528298 ↗
43. J.W. Arblaster: J. Phase Equilib. Diffus., 2017, vol. 38(5), pp. 707–22. https://doi.org/10.1007/s11669-017-0557-4.10.1007/s11669-017-0557-4 ↗
44. J.W. Arblaster: J. Phase Equilib. Diffus., 2014, vol. 35(4), pp. 490–501. https://doi.org/10.1007/s11669-014-0319-5.10.1007/s11669-014-0319-5 ↗
45. P.D. Desai and P.D. Desap: Int. J. Thermophys., 1987, vol. 8(6), pp. 781–94. https://doi.org/10.1007/BF00500794.10.1007/BF00500794 ↗
46. S.K. Gupta and K.A. Gingerich: J. Chem. Phys., 1979, vol. 70(12), pp. 5350–353. https://doi.org/10.1063/1.437466.10.1063/1.437466 ↗
47. M.B. Panish and L. Reif: J. Chem. Phys., 1963, vol. 38(1), pp. 253–56. https://doi.org/10.1063/1.1733473.10.1063/1.1733473 ↗
48. R.I. Sheldon and P.W. Gilles: J. Chem. Phys., 1977, vol. 66(8), pp. 3705–711. https://doi.org/10.1063/1.434407.10.1063/1.434407 ↗
49. P. Tarafder, C. Rock, and T. Horn: Materials, 2021, vol. 14(11), p. 2932.10.3390/ma14112932 ↗
50. J.J. Lewandowski and M. Seifi: Annu. Rev. Mater. Res., 2016, vol. 46, pp. 151–86.10.1146/annurev-matsci-070115-032024 ↗
51. R.T. Begley and J.H. Bechtold: J. Less Common Met., 1961, vol. 3(1), pp. 1–2. https://doi.org/10.1016/0022-5088(61)90037-6.10.1016/0022-5088(61)90037-6 ↗
52. A. Sergi, R.H. Khan, K. Georgilas, M. Meisnar, A. Makaya, and M.M. Attallah: Int. J. Refract Metal Hard Mater., 2022, vol. 104, p. 105803.10.1016/j.ijrmhm.2022.105803 ↗
53. J.S. Benjamin: Met. Powder Rep., 1990, vol. 45(2), pp. 122–27.10.1016/S0026-0657(10)80124-9 ↗