Creep and Tensile Behavior of a Nickel-Based Single Crystal Superalloy With a Bimodal γ′ Precipitation
Source abstract
Abstract
High temperature aircraft engines components made from single crystal nickel-based superalloys typically have homogenous γ/γ′ microstructure after conventional solution and aging heat treatments. However, manufacturing processes as well as service conditions may alter the material’s microstructure which can lead to a multimodal γ′ precipitation with regular secondary precipitates (400 to 500 nm) and smaller (10 to 100 nm) tertiary precipitates. In this study, such a bimodal microstructure was first obtained after a heat treatment study and the impact of such a microstructure on mechanical behavior was then investigated. Tensile and creep properties are sensitive to such a bimodal microstructure below 900 °C with a 60 to 120 MPa reduction in yield stress and a creep lifetime reduced by factors of 2 to 15 compared to a unimodal reference microstructure. It is suggested that tertiary γ′ precipitates facilitates secondary γ′ shearing reducing tensile and creep properties. Above 900 °C, no difference in tensile and creep behavior has been observed between both kinds of microstructure as tertiary precipitates are rapidly dissolving.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. J. Cormier and C.-A. Gandin: Nickel Base Single Crystals Across Length Scales, Elsevier, Amsterdam, 2022, pp. 193–222.10.1016/B978-0-12-819357-0.00015-9 ↗
3. P. Caron, P.J. Henderson, T. Khan, and M. McLean: Scr. Metall., 1986, vol. 20, pp. 875–80.10.1016/0036-9748(86)90458-8 ↗
4. J. Coakley, D. Ma, M. Frost, D. Dye, D.N. Seidman, D.C. Dunand, and H.J. Stone: Acta Mater., 2017, vol. 135, pp. 77–87.10.1016/j.actamat.2017.06.021 ↗
5. J. Cormier, X. Milhet, and J. Mendez: J. Mater. Sci., 2007, vol. 42, pp. 7780–86.10.1007/s10853-007-1645-3 ↗
6. R. Giraud, Z. Hervier, J. Cormier, G. Saint-Martin, F. Hamon, X. Milhet, and J. Mendez: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 131–46.10.1007/s11661-012-1397-9 ↗
7. J.-B. le Graverend, J. Cormier, M. Jouiad, F. Gallerneau, P. Paulmier, and F. Hamon: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5295–302.10.1016/j.msea.2010.04.097 ↗
8. J. Cormier, V. Caccuri, J.-B. le Graverend, and P. Villechaise: Scripta Mater., 2017, vol. 129, pp. 100–03.10.1016/j.scriptamat.2016.10.012 ↗
9. M. Zhang, Y. Zhao, Y. Guo, Y. Liu, J. Zhang, Y. Luo, and Z. Yao: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 2214–25.10.1007/s11661-022-06663-9 ↗
10. J. Cormier and G. Cailletaud: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6300–12.10.1016/j.msea.2010.06.023 ↗
11. W. An, S. Utada, X. Guo, S. Antonov, W. Zheng, J. Cormier, and Q. Feng: J. Mater. Sci. Technol., 2022, vol. 104, pp. 269–84.10.1016/j.jmst.2021.07.015 ↗
12. K. Kakehi: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1249–59.10.1007/s11661-999-0274-7 ↗
13. C.M.F. Rae and R.C. Reed: Acta Mater., 2007, vol. 55, pp. 1067–81.10.1016/j.actamat.2006.09.026 ↗
14. C.M.F. Rae and L. Zhang: Mater. Sci. Technol., 2009, vol. 25, pp. 228–35.10.1179/174328408X369311 ↗
15. G. Drew, R. Reed, K. Kakehi, and C. Rae: in Superalloys 2004, 2004, Seven Springs, PA, TMS, pp. 127–36.10.7449/2004/Superalloys_2004_127_136 ↗
16. C.M.F. Rae, M.A. Rist, D.C. Cox, R.C. Reed, and N. Matan: Metall. Mater. Trans. A., 2000, vol. 31A, pp. 2219–28.10.1007/s11661-000-0139-6 ↗
17. P. Caron and T. Khan: Mater. Sci. Eng., 1983, vol. 61, pp. 173–84.10.1016/0025-5416(83)90199-4 ↗
18. D.M. Shah and D.N. Duhl: in Superalloys 1984, 1984, Seven Springs, PA, TMS, pp. 105–14.10.7449/1984/Superalloys_1984_105_114 ↗
19. P. Caron, Y. Ohta, Y.G. Nakagawa, and T. Khan: in Superalloys 1988, 1988, Seven Springs, PA, TMS, pp. 215–24.10.7449/1988/Superalloys_1988_215_224 ↗
20. U.S. patent 4,643,782, 1984.
21. F. Riallant, J. Cormier, A. Longuet, X. Milhet, and J. Mendez: Metall. Mater. Trans. A., 2014, vol. 45A, pp. 351–60.10.1007/s11661-013-1961-y ↗
22. J.R. Vaunois, J. Cormier, and P. Villechaise: in 7th International Symposium on Superalloy 718 and Derivatives, 2010, Pittsburgh, PA, TMS, pp. 199–213.10.7449/2010/Superalloys_2010_199_213 ↗
23. B. Roebuck, D. Cox, and R. Reed: Scripta Mater., 2001, vol. 44, pp. 917–21.10.1016/S1359-6462(00)00662-X ↗
24. J. Cormier, M. Jouiad, F. Hamon, P. Villechaise, and X. Milhet: Philos. Mag. Lett., 2010, vol. 90, pp. 611–20.10.1080/09500839.2010.489887 ↗
25. S. Steuer, Z. Hervier, S. Thabart, C. Castaing, T.M. Pollock, and J. Cormier: Mater. Sci. Eng. A, 2014, vol. 601, pp. 145–52.10.1016/j.msea.2014.02.046 ↗
26. X. Milhet, M. Arnoux, V. Pelosin, and J. Colin: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 2031–40.10.1007/s11661-012-1575-9 ↗
27. C.M.F. Rae, N. Matan, and R.C. Reed: Mater. Sci. Eng. A, 2001, vol. 300, pp. 125–34.10.1016/S0921-5093(00)01788-3 ↗
28. X. Wu, A. Dlouhy, Y.M. Eggeler, E. Spiecker, A. Kostka, C. Somsen, and G. Eggeler: Acta Mater., 2018, vol. 144, pp. 642–55.10.1016/j.actamat.2017.09.063 ↗
29. X. Wu, P. Wollgramm, C. Somsen, A. Dlouhy, A. Kostka, and G. Eggeler: Acta Mater., 2016, vol. 112, pp. 242–60.10.1016/j.actamat.2016.04.012 ↗
30. N. Matan, D.C. Cox, C.M.F. Rae, and R.C. Reed: Acta Mater., 1999, vol. 47, pp. 2031–45.10.1016/S1359-6454(99)00093-2 ↗
31. A. Epishin, T. Link, H. Klingelhöffer, B. Fedelich, U. Brückner, and P.D. Portella: Mater. Sci. Eng. A, 2009, vol. 510–511, pp. 262–65.10.1016/j.msea.2008.04.135 ↗
32. R. Desmorat, A. Mattiello, and J. Cormier: Int. J. Plast, 2017, vol. 95, pp. 43–81.10.1016/j.ijplas.2017.03.010 ↗
33. B. Fedelich, A. Epishin, T. Link, H. Klingelhöffer, G. Künecke, and P.D. Portella: in Superalloys 2012, 2012, Seven Springs, PA, TMS, pp. 491–500.10.1002/9781118516430.ch54 ↗
34. J.-B. le Graverend, J. Cormier, F. Gallerneau, P. Villechaise, S. Kruch, and J. Mendez: Int. J. Plast, 2014, vol. 59, pp. 55–83.10.1016/j.ijplas.2014.03.004 ↗
35. G. Cailletaud, J.P. Culie, and H. Kaczmarek: in Creep in Structures, A.R.S. Ponter and D.R. Hayhurst, eds., Springer, Berlin, Heidelberg, 1981, pp. 48–71.10.1007/978-3-642-81598-0_3 ↗
36. G. Cailletaud, J.P. Culié, and H. Kaczmarek: in Mechanical Behaviour of Materials, J. Carlsson and N.G. Ohlson, eds., Pergamon, 1984, pp. 255–61.10.1016/B978-1-4832-8372-2.50028-2 ↗
37. T. Khan and P. Caron: Mater. Sci. Technol., 1986, vol. 2, pp. 486–92.10.1179/mst.1986.2.5.486 ↗
38. D. Barba, E. Alabort, S. Pedrazzini, D.M. Collins, A.J. Wilkinson, P.A.J. Bagot, M.P. Moody, C. Atkinson, A. Jérusalem, and R.C. Reed: Acta Mater., 2017, vol. 135, pp. 314–29.10.1016/j.actamat.2017.05.072 ↗
39. B.H. Kear and B.J. Piearcey: Trans. TMS-AIME, 1976, vol. 239, pp. 1209–215.
40. B. Reppich: Acta Metall., 1982, vol. 30, pp. 87–94.10.1016/0001-6160(82)90048-7 ↗
41. B. Reppich, W. Kühlein, G. Meyer, D. Puppel, M. Schulz, and G. Schumann: Mater. Sci. Eng., 1986, vol. 83, pp. 45–63.10.1016/0025-5416(86)90173-4 ↗
42. E.I. Galindo-Nava, L.D. Connor, and C.M.F. Rae: Acta Mater., 2015, vol. 98, pp. 377–90.10.1016/j.actamat.2015.07.048 ↗
43. L. Thébaud, P. Villechaise, C. Crozet, A. Devaux, D. Béchet, J.-M. Franchet, A.-L. Rouffié, M. Mills, and J. Cormier: Mater. Sci. Eng. A, 2018, vol. 716, pp. 274–83.10.1016/j.msea.2017.12.104 ↗
44. A.A. Hopgood and J.W. Martin: Mater. Sci. Eng., 1986, vol. 82, pp. 27–36.10.1016/0025-5416(86)90092-3 ↗