Ag3Sn Morphology Transitions During Eutectic Growth in Sn–Ag Alloys
Source abstract
Abstract
Abstract Eutectic Ag3Sn can grow with a variety of morphologies depending on the solidification conditions and plays an important role in the performance of Pb-free solders. Here, we study morphology transitions in theβ-Sn + Ag3Sn eutectic at increasing growth velocity using a combination of real-time X-ray imaging and analytical electron microscopy. Orthorhombic Ag3Sn grew as faceted plates or rods with [010] growth direction and (001) as the largest facet in all three eutectic growth morphologies: Irregular plate, broken-lamellar, and rod. Reproducibleβ-Sn + Ag3Sn orientation relationships formed for the latter two morphologies. The mechanisms of spacing adjustment and the reversible transition from plate to rod growth are studied for transient solidification after velocity changes. The transition from fully eutectic growth toβ-Sn dendrites plus eutectic is reasonably reproduced using a competitive growth criterion. At the highest velocities, Ag3Sn rods developed perturbations whose break down into particles is discussed in terms of unsteady growth and pinch-off mechanisms.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. K. Suganuma, S.-H. Huh, K. Kim, H. Nakase, and Y. Nakamura: Mater. Trans., 2001, vol. 42, pp. 286–91.10.2320/matertrans.42.286 ↗
2. J. Keller, D. Baither, U. Wilke, and G. Schmitz: Acta Mater., 2011, vol. 59, pp. 2731–41.10.1016/j.actamat.2011.01.012 ↗
3. S.-K. Seo, S.K. Kang, D.-Y. Shih, and H.M. Lee: J. Electron. Mater., 2009, vol. 38, pp. 257–65.10.1007/s11664-008-0545-x ↗
4. S. Terashima, Y. Kariya, T. Hosoi, and M. Tanaka: J. Electron. Mater., 2003, vol. 32, pp. 1527–33.10.1007/s11664-003-0125-z ↗
5. R.J. Coyle, K. Sweatman, and B. Arfaei: JOM, 2015, vol. 67, pp. 2394–415.10.1007/s11837-015-1595-1 ↗
6. R. Coyle, M. Reid, C. Ryan, R. Popowich, P. Read, D. Fleming, M. Collins, J. Punch, and I. Chatterji: in 2009 59th Electronic Components and Technology Conference, IEEE, 2009, pp. 423–3010.1109/ECTC.2009.5074048 ↗
7. S. Jun, Y.-C. Liu, Y.-J. Han, H. Gao, W.E.I. Chen, and Y.-Q. Yang: Trans. Nonferrous Met. Soc. China, 2006, vol. 16, pp. 59–64.10.1016/S1003-6326(06)60011-3 ↗
8. G. Wei and L. Wang: in 2012 13th International Conference on Electronic Packaging Technology & High Density Packaging, IEEE, 2012, pp. 453–56.10.1109/ICEPT-HDP.2012.6474657 ↗
9. F. Ochoa, J.J. Williams, and N. Chawla: JOM, 2003, vol. 55, pp. 56–60.10.1007/s11837-003-0142-7 ↗
10. W.R. Osório, D.R. Leiva, L.C. Peixoto, L.R. Garcia, and A. Garcia: J. Alloys Compd., 2013, vol. 562, pp. 194–204.10.1016/j.jallcom.2013.02.050 ↗
11. Y. Xu, T. Gu, J. Xian, F. Giuliani, T.B. Britton, C.M. Gourlay, and F.P.E. Dunne: Int. J. Plast., 2021, vol. 137, p. 102904.10.1016/j.ijplas.2020.102904 ↗
12. T. Gu, C.M. Gourlay, and T.B. Britton: J. Electron. Mater., 2021, vol. 50, pp. 926–38.10.1007/s11664-020-08697-4 ↗
13. A. Moore and R. Elliott: Iron Steel Inst. Lond., 1968, vol. 15, pp. 167–72.
14. J.F. Bromley, F. Vnuk, and R.W. Smith: J. Mater. Sci., 1983, vol. 18, pp. 3143–53.10.1007/BF00700799 ↗
15. H. Esaka, K. Shinozuka, and M. Tamura: Mater. Trans., 2005, vol. 46, pp. 916–21.10.2320/matertrans.46.916 ↗
16. M. Şahin and E. Çadirli: J. Mater. Sci. Mater. Electron., 2012, vol. 23, pp. 484–92.10.1007/s10854-011-0422-x ↗
17. A. Moore: The Solidification of Eutectic Alloys, PhD thesis., The University of Manchester (United Kingdom), 1967.
18. L.R. Garcia, W.R. Osório, and A. Garcia: Mater. Des., 2011, vol. 32, pp. 3008–12.10.1016/j.matdes.2010.12.046 ↗
19. Thermo-Calc: 2015.
20. H. Esaka, M. Tsuji, M. Tamura, and K. Shinozuka: Fourth Pacific Rim Int. Conf. Adv. Mater. Process. (2001)
21. M.N. Croker, R.S. Fidler, and R.W. Smith: Proc. R. Soc. London. A, 1973, vol. 335, pp. 15–37.10.1098/rspa.1973.0111 ↗
22. L. Snugovsky, P. Snugovsky, D.D. Perovic, T. Sack, and J.W. Rutter: Mater. Sci. Technol., 2005, vol. 21, pp. 53–60.10.1179/174328405X13994 ↗
23. R.S. Sidhu, S.V. Madge, X. Deng, and N. Chawla: J. Electron. Mater., 2007, vol. 36, pp. 1615–20.10.1007/s11664-007-0239-9 ↗
24. B. Arfaei and E. Cotts: J. Electron. Mater., 2009, vol. 38, pp. 2617–27.10.1007/s11664-009-0932-y ↗
25. F. Mutuku, B. Arfaei, and E.J. Cotts: J. Electron. Mater., 2017, vol. 46, pp. 2067–79.10.1007/s11664-016-5130-0 ↗
26. J.W. Xian, S.A. Belyakov, and C.M. Gourlay: J. Electron. Mater., 2021, vol. 50, pp. 786–95.10.1007/s11664-020-08498-9 ↗
27. R.S. Sidhu and N. Chawla: Mater. Charact., 2004, vol. 52, pp. 225–30.10.1016/j.matchar.2004.04.010 ↗
28. B.L. Silva, A. Garcia, and J.E. Spinelli: Microelectron. Reliab., 2014, vol. 54, pp. 2929–34.10.1016/j.microrel.2014.07.126 ↗
29. H.-T. Lee and Y.-F. Chen: J. Alloys Compd., 2011, vol. 509, pp. 2510–17.10.1016/j.jallcom.2010.11.068 ↗
30. J. Shen, Y.C. Chan, and S.Y. Liu: Intermetallics, 2008, vol. 16, pp. 1142–148.10.1016/j.intermet.2008.06.016 ↗
31. W. Kurz and D.J. Fisher: Int. Met. Rev., 1979, vol. 24, pp. 177–204.10.1179/095066079790136408 ↗
32. B. Toloui and A. Hellawell: Acta Metall., 1976, vol. 24, pp. 565–73.10.1016/0001-6160(76)90102-4 ↗
33. H. Yasuda, I. Ohnaka, K. Kawasaki, A. Sugiyama, T. Ohmichi, J. Iwane, and K. Umetani: J. Cryst. Growth, 2004, vol. 262, pp. 645–52.10.1016/j.jcrysgro.2003.09.052 ↗
34. N. Hou, S.A. Belyakov, L. Pay, A. Sugiyama, H. Yasuda, and C.M. Gourlay: Acta Mater., 2018, vol. 149, pp. 119–31.10.1016/j.actamat.2018.02.034 ↗
35. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
36. V.T. Witusiewicz, U. Hecht, S. Rex, and M. Apel: Acta Mater., 2005, vol. 53, pp. 3663–69.10.1016/j.actamat.2005.04.015 ↗
37. M. Serefoglu and R.E. Napolitano: Acta Mater., 2008, vol. 56, pp. 3862–873.10.1016/j.actamat.2008.02.050 ↗
38. C.W. Fairhurst and J.B. Cohen: Acta Crystallogr. Sect. B, 1972, vol. 28, pp. 371–78.10.1107/S0567740872002432 ↗
39. E. Rönnebro, J. Yin, A. Kitano, M. Wada, and T. Sakai: Solid State Ionics, 2005, vol. 176, pp. 2749–57.10.1016/j.ssi.2005.08.007 ↗
40. P.J. Rossi, N. Zotov, and E.J. Mittemeijer: Zeitschrift für Krist. Mater., 2016, vol. 231, pp. 1–9.
41. M. Mueller, I. Panchenko, S. Wiese, and K.-J. Wolter: IEEE Trans. Components Packag. Manuf. Technol., 2019, vol. 10, pp. 18–29.10.1109/TCPMT.2019.2952093 ↗
42. H. Yu, Y. Sun, W.R. Meier, P.C. Canfield, C.R. Weinberger, S.-W. Lee, and M. Aindow: J. Mater. Sci., 2018, vol. 53, pp. 5317–28.10.1007/s10853-017-1901-0 ↗
43. H.E. Swanson: Standard X-Ray Diffraction Powder Patterns, vol. 1, US Department of Commerce, National Bureau of Standards, 1953.
44. S.C. Flood and J.D. Hunt: Met. Sci., 1981, vol. 15, pp. 287–94.10.1179/030634581790426813 ↗
45. M. Gündüz, H. Kaya, E. Çadırlı, and A. Özmen: Mater. Sci. Eng. A, 2004, vol. 369, pp. 215–29.10.1016/j.msea.2003.11.020 ↗
46. L.M. Hogan and H. Song: Metall. Mater. Trans. A, 1987, vol. 18, pp. 707–13.10.1007/BF02649487 ↗
47. P. Magnin and R. Trivedi: Acta Metall. Mater., 1991, vol. 39, pp. 453–67.10.1016/0956-7151(91)90114-G ↗
48. D.J. Fisher and W. Kurz: Acta Metall., 1980, vol. 28, pp. 777–94.10.1016/0001-6160(80)90155-8 ↗
49. H. Jones and W. Kurz: Int. J. Mater. Res., 1981, vol. 72, pp. 792–97.10.1515/ijmr-1981-721110 ↗
50. P. Magnin and W. Kurz: Acta Metall., 1987, vol. 35, pp. 1119–128.10.1016/0001-6160(87)90059-9 ↗
51. U. Böyük and N. Maraşlı: Mater. Chem. Phys., 2010, vol. 119, pp. 442–48.10.1016/j.matchemphys.2009.09.022 ↗
52. R. Elliott: in Eutectic Solidification Processing, R. Elliott, ed., Butterworth-Heinemann, 1983, pp. 120–56.10.1016/B978-0-408-10714-3.50009-5 ↗
53. M. Rappaz and J.A. Dantzig: Solidification, EPFL Press, Lausanne, 2009, pp. 386–415.
54. B. Caroli, C. Caroli, G. Faivre, and J. Mergy: J. Cryst. Growth, 1992, vol. 118, pp. 135–50.10.1016/0022-0248(92)90058-Q ↗
55. S. Mohagheghi and M. Şerefoğlu: Acta Mater., 2018, vol. 151, pp. 432–42.10.1016/j.actamat.2018.03.019 ↗
56. S. Bottin-Rousseau, M. Medjkoune, O. Senninger, L. Carroz, R. Soucek, U. Hecht, and S. Akamatsu: J. Cryst. Growth, 2021, vol. 570, p. 126203.10.1016/j.jcrysgro.2021.126203 ↗
57. Z.L. Ma, J.W. Xian, S.A. Belyakov, and C.M. Gourlay: Acta Mater., 2018, vol. 150, pp. 281–94.10.1016/j.actamat.2018.02.047 ↗
58. K.A. Jackson and J.D. Hunt: AIME Met Soc Trans, 1966, vol. 236, pp. 1129–42.
59. R.T. Southin and B.L. Jones: The Micromorphology of High Volume-Ratio Eutectics: A Scanning Electron Microscope Study, DTIC Document, 1968.
60. R. Yoshimura, K. Morishita, H. Yasuda, H. Esaka, and K. Shinozuka: J. Jpn Inst. Met., 2018, vol. 82, pp. 78–83.10.2320/jinstmet.J2017057 ↗
61. H. Esaka and W. Kurz: J. Cryst. Growth, 1984, vol. 69, pp. 362–66.10.1016/0022-0248(84)90343-9 ↗
62. M. Rappaz and P. Thevoz: Acta Metall., 1987, vol. 35, pp. 1487–97.10.1016/0001-6160(87)90094-0 ↗
63. M. Rappaz and J.A. Dantzig: Solidification, EPFL Press, Lausanne, 2009.
64. G. Ivantsov: Dokl. Akad. Nnuk., 1947, vol. 58, p. 567.
65. J. Lipton, M.E. Glicksman, and W. Kurz: Mater. Sci. Eng., 1984, vol. 65, pp. 57–63.10.1016/0025-5416(84)90199-X ↗
66. J. Lipton, M. Glicksman, and W. Kurz: Metall. Mater. Trans. A, 1987, vol. 18, pp. 341–45.10.1007/BF02825716 ↗
67. H. Jones and W. Kurz: Metall. Trans. A, 1980, vol. 11, pp. 1265–73.10.1007/BF02653480 ↗
68. M.H. Burden and J.D. Hunt: J. Cryst. Growth, 1974, vol. 22, pp. 109–16.10.1016/0022-0248(74)90127-4 ↗
69. M.H. Burden and J.D. Hunt: J. Cryst. Growth, 1974, vol. 22, pp. 328–30.10.1016/0022-0248(74)90178-X ↗
70. B. Saatçi, F. Meydaneri, M. Özdemir, E. Yılmaz, and A. Ülgen: Surf. Sci., 2011, vol. 605, pp. 623–31.10.1016/j.susc.2010.12.030 ↗
71. J. Cahoon, Y. Jiao, K. Tandon, and M. Chaturvedi: J. Phase Equilib. Diffus., 2006, vol. 27, pp. 325–32.10.1007/s11669-006-0004-4 ↗
72. S. Engin, U. Böyük, and N. Maraşlı: J. Alloys Compd., 2009, vol. 488, pp. 138–43.10.1016/j.jallcom.2009.08.156 ↗
73. D. Swenson: Lead-Free Electronic Solders, Springer, New York, 2006, pp. 39–54.
74. D.R.H. Jones: J. Mater. Sci., 1974, vol. 9, pp. 989–92.10.1007/BF00570394 ↗
75. D.R.H. Jones, I.R. Sare, W.J. Morgan, and D.S.O. Tinn: J. Mater. Sci., 1976, vol. 11, pp. 855–58.10.1007/BF00542301 ↗
76. I.R. Hughes and H. Jones: J. Mater. Sci., 1976, vol. 11, pp. 1781–93.10.1007/BF00708256 ↗
77. Y.G. Nakagawa and G.C. Weatherly: Acta Metall., 1972, vol. 20, pp. 345–50.10.1016/0001-6160(72)90027-2 ↗
78. M. McLean: Directionally Solidified Materials for High Temperature Service, 1988.
79. B. Arfaei, M. Benedict, and E.J. Cotts: J. Appl. Phys., 2013, vol. 114, p. 173506.10.1063/1.4826437 ↗
80. G. Parks, A. Faucett, C. Fox, J. Smith, and E. Cotts: JOM, 2014, vol. 66, pp. 2311–19.10.1007/s11837-014-1161-2 ↗
81. C.M. Gourlay, S.A. Belyakov, Z.L. Ma, and J.W. Xian: JOM, 2015, vol. 67, pp. 2383–93.10.1007/s11837-015-1582-6 ↗