High-Temperature CoNi-Based Superalloys Strengthened by γ′-(Ni,Co)3(Cr,Al,Ti,X): The Effect of Refractory Elements
Source abstract
Abstract
Recent research on Co-based and CoNi-based alloys revealed that the Co–Al–W-system provides interesting properties, however, the high content of W addition triggers high mass density of alloys which limits its industrial application. Therefore, new high temperature superalloys based on the Co–Ni–Al–Ti-system with high content Cr and strengthened by $γ′$-(Ni,Co)$_3$(Cr,Al,Ti) precipitates, have been developed, and the effect of different refractory element additions was investigated. STEM-EDS and HEXRD were employed to determine the elemental partitioning behavior and the lattice misfit between the gamma and $γ′$ phases. Ta and Nb strongly concentrate within the gamma-prime phase, whereas Mo weakly partitions to the $γ$ phase. W distributes equally between the gamma and gamma-prime phases. These new superalloys have an unexpectedly high positive misfit compared with some conventional Ni-based superalloys and Co-based superalloys. Nb and Ta additions increase the lattice misfit further, while Mo and W decrease the lattice misfit. The effect of refractory elements alloying on the yield stress at room temperature was evaluated by analyzing the contributions of different strengthening mechanisms. Alloying with Nb or Ta significantly improves precipitation strengthening by increasing the antiphase boundary energy. Mo has the highest solid solution strengthening effect in the gamma phase, followed by W. Compared with some conventional Ni-based superalloys, the investigated new CoNi-based superalloys exhibited better mechanical properties at high temperature, which indicates that these compositionally complex alloys are possible candidates for high temperature applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. R.C. Reed: The superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2008.
2. Y.F. Gu, C. Cui, H. Harada, T. Fukuda, D. Ping, A. Mitsuhashi, and J. Fujioka: Superalloys, 2008, vol. 15, pp. 53–61.
3. J.C. Williams and E.A. Starke Jr.: Acta Mater., 2003, vol. 51(19), pp. 5775–99.10.1016/j.actamat.2003.08.023 ↗
4. H.A. Roth, C.L. Davis, and R.C. Thomson: Metall Mater. Trans. A, 1997, vol. 28(6), pp. 1329–35.10.1007/s11661-997-0268-2 ↗
5. A.W. Thompson: Acta Metall., 1977, vol. 25(1), pp. 83–86.10.1016/0001-6160(77)90249-8 ↗
6. C. Xiao, R.A. Mirshams, S.H. Whang, and W.M. Yin: Mater Sci. Eng. A, 2001, vol. 301(1), pp. 35–43.10.1016/S0921-5093(00)01392-7 ↗
7. F. Pyczak, A. Bauer, M. Göken, S. Neumeier, U. Lorenz, M. Oehring, and F. Symanzik: Mater. Sci. Eng. A, 2013, vol. 571, pp. 13–18.10.1016/j.msea.2013.02.007 ↗
8. A. Suzuki and T.M. Pollock: Acta Mater., 2008, vol. 56(6), pp. 1288–97.10.1016/j.actamat.2007.11.014 ↗
9. S. Neumeier, L.P. Freund, and M. Göken: Scripta Mater., 2015, vol. 109, pp. 104–07.10.1016/j.scriptamat.2015.07.030 ↗
10. S.K. Makineni, B. Nithin, and K. Chattopadhyay: Acta Mater., 2015, vol. 85, pp. 85–94.10.1016/j.actamat.2014.11.016 ↗
11. Y. Chen, C. Wang, J. Ruan, T. Omori, R. Kainuma, K. Ishida, and X. Liu: Acta Mater., 2019, vol. 170, pp. 62–74.10.1016/j.actamat.2019.03.013 ↗
12. J.J. Ruan, X.J. Liu, S.Y. Yang, W.W. Xu, T. Omori, T. Yang, and K. Ishida: Intermetallics, 2018, vol. 92, pp. 126–32.10.1016/j.intermet.2017.09.015 ↗
13. C.H. Zenk, I. Povstugar, R. Li, F. Rinaldi, S. Neumeier, D. Raabe, and M. Göken: Acta Mater., 2017, vol. 135, pp. 244–51.10.1016/j.actamat.2017.06.024 ↗
14. E.A. Lass, D.J. Sauza, D.C. Dunand, and D.N. Seidman: Acta Mater., 2018, vol. 147, pp. 284–95.10.1016/j.actamat.2018.01.034 ↗
15. J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Science, 2006, vol. 312(5770), pp. 90–91.10.1126/science.1121738 ↗
16. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303.10.1002/adem.200300567 ↗
17. X. Zhuang, S. Antonov, L. Li, and Q. Feng: Scripta Mater., 2021, vol. 202, 114004.10.1016/j.scriptamat.2021.114004 ↗
18. W. Li, L. Li, S. Antonov, C. Wei, J.C. Zhao, and Q. Feng: J. Alloys Compd., 2021, vol. 881, 160618.10.1016/j.jallcom.2021.160618 ↗
19. H. Li, X. Zhuang, S. Lu, S. Antonov, L. Li, and Q. Feng: J. Alloys Compd., 2022, vol. 894, 162489.10.1016/j.jallcom.2021.162489 ↗
20. D.S. Ng, D.W. Chung, J.P. Toinin, D.N. Seidman, D.C. Dunand, and E.A. Lass: Mater. Sci. Eng. A, 2020, vol. 778, 139108.10.1016/j.msea.2020.139108 ↗
21. J.Y. He, H. Wang, H.L. Huang, X.D. Xu, M.W. Chen, Y. Wu, and Z.P. Lu: Acta Mater., 2016, vol. 102, pp. 187–96.10.1016/j.actamat.2015.08.076 ↗
22. M.H. Chuang, M.H. Tsai, W.R. Wang, S.J. Lin, and J.W. Yeh: Acta Mater., 2011, vol. 59(16), pp. 6308–17.10.1016/j.actamat.2011.06.041 ↗
23. D. Li, C. Li, T. Feng, Y. Zhang, G. Sha, J.J. Lewandowski, and Y. Zhang: Acta Mater., 2017, vol. 123, pp. 285–94.10.1016/j.actamat.2016.10.038 ↗
24. Y.L. Zhao, T. Yang, Y. Tong, J. Wang, J.H. Luan, Z.B. Jiao, D. Chen, Y. Yang, A. Hu, C.T. Liu, and J.J. Kai: Acta Mater., 2017, vol. 138, pp. 72–82.10.1016/j.actamat.2017.07.029 ↗
25. Y. Zhao, T. Yang, B. Han, J. Luan, D. Chen, W. Kai, and J.J. Kai: Mater. Res. Lett., 2019, vol. 7(4), pp. 152–58.10.1080/21663831.2019.1568315 ↗
26. T. Yang, Y.L. Zhao, L. Fan, J. Wei, J.H. Luan, W.H. Liu, and C.T. Liu: Acta Mater., 2020, vol. 189, pp. 47–59.10.1016/j.actamat.2020.02.059 ↗
27. O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang, and P.K. Liaw: Intermetallics, 2010, vol. 18(9), pp. 1758–65.10.1016/j.intermet.2010.05.014 ↗
28. S.S. Naghavi and V.I. Hegde: Acta Mater., 2017, vol. 132, pp. 467–78.10.1016/j.actamat.2017.04.060 ↗
29. S. Neumeier, H.U. Rehman, J. Neuner, C.H. Zenk, S. Michel, S. Schuwalow, and M. Göken: Acta Mater., 2016, vol. 106, pp. 304–12.10.1016/j.actamat.2016.01.028 ↗
30. R.C. Reed, M.P. Jackson, and Y.S. Na: Metall Mater. Trans. A, 1999, vol. 30(3), pp. 521–33.10.1007/s11661-999-0044-6 ↗
31. Y.F. Gu, T. Fukuda, C. Cui, H. Harada, A. Mitsuhashi, T. Yokokawa, and T. Kobayashi: Metall. Mater. Trans. A, 2009, vol. 40(13), p. 3047.10.1007/s11661-009-0032-x ↗
32. C.Y. Cui, Y.F. Gu, D.H. Ping, and H. Harada: Metall Mater. Trans. A, 2009, vol. 40(2), pp. 282–91.10.1007/s11661-008-9746-4 ↗
33. E.I. Galindo-Nava, L.D. Connor, and C.M.F. Rae: Acta Mater., 2015, vol. 98, pp. 377–90.10.1016/j.actamat.2015.07.048 ↗
34. C.H. Zenk, S. Neumeier, N.M. Engl, S.G. Fries, O. Dolotko, M. Weiser, and M. Göken: Scr. Mater., 2016, vol. 112, pp. 83–86.10.1016/j.scriptamat.2015.09.018 ↗
35. P.J. Bocchini, C.K. Sudbrack, R.D. Noebe, D.C. Dunand, and D.N. Seidman: Mater. Sci. Eng. A, 2017, vol. 705, pp. 122–32.10.1016/j.msea.2017.08.034 ↗
36. C.H. Zenk, S. Neumeier, H.J. Stone, and M. Göken: Intermetallics, 2014, vol. 55, pp. 28–39.10.1016/j.intermet.2014.07.006 ↗
37. L. Wang, M. Oehring, Y. Liu, U. Lorenz, and F. Pyczak: Acta Mater., 2019, vol. 162, pp. 176–88.10.1016/j.actamat.2018.09.059 ↗
38. B. Nithin, A. Samanta, S.K. Makineni, T. Alam, P. Pandey, A.K. Singh, and K. Chattopadhyay: J. Mater. Sci., 2017, vol. 52(18), pp. 11036–47.10.1007/s10853-017-1159-6 ↗
39. P. Pandey, S.K. Makineni, A. Samanta, A. Sharma, S.M. Das, B. Nithin, and K. Chattopadhyay: Acta Mater., 2019, vol. 163, pp. 140–53.10.1016/j.actamat.2018.09.049 ↗
40. Y. Amouyal, Z. Mao, and D.N. Seidman: Acta Mater., 2010, vol. 58(18), pp. 5898–5911.10.1016/j.actamat.2010.07.004 ↗
41. J.P. Minshull, S. Neumeier, M.G. Tucker, and H.J. Stone: Adv. Mat. Res., 2011, vol. 278, pp. 399–404.
42. R.J. Mitchell, M. Preuss, M.C. Hardy, and S. Tin: Mater Sci. Eng. A, 2006, vol. 423(1–2), pp. 282–91.10.1016/j.msea.2006.02.039 ↗
43. I. Povstugar, C.H. Zenk, R. Li, P.P. Choi, S. Neumeier, O. Dolotko, D. Raabe, and J. Mater: Sci. Technol., 2016, vol. 32(3), pp. 220–25.
44. Y.J. Chang and A.C. Yeh: Mater. Chem. Phys., 2018, vol. 210, pp. 111–19.10.1016/j.matchemphys.2017.09.057 ↗
45. A. Bauer, S. Neumeier, F. Pyczak, and M. Göken: Adv. Eng. Mat., 2015, vol. 178, pp. 1113–18.
46. D.B. Williams and E.P. Butler: Int. Met. Rev., 1981, vol. 26, pp. 153–83.10.1179/imr.1981.26.1.153 ↗
47. L. Fan, T. Yang, J.H. Luan, and Z.B. Jiao: J. Alloys Compd., 2020, vol. 15, p. 154903.10.1016/j.jallcom.2020.154903 ↗
48. Z. Yu, Y. Zheng, and Q. Feng: Scripta Mater., 2017, vol. 128, pp. 23–26.10.1016/j.scriptamat.2016.09.031 ↗
49. T.C. Duong, R.E. Hackenberg, V. Attari, A. Landa, P.E. Turchi, and R. Arróyave: Comput. Mater. Sci., 2020, vol. 175, 109573.10.1016/j.commatsci.2020.109573 ↗
50. A. Suzuki, G.C. DeNolf, and T.M. Pollock: Scripta Mater., 2007, vol. 56(5), pp. 385–88.10.1016/j.scriptamat.2006.10.039 ↗
51. A. Bezold, N. Volz, M. Lenz, C.H. Zenk, E. Spiecker, M. Mills, M. Göken, and S. Neumeier: Scripta Mater., 2021, vol. 200, 113928.10.1016/j.scriptamat.2021.113928 ↗
52. J. Ruan, W. Xu, T. Yang, J. Yu, S. Yang, J. Luan, and X. Liu: Acta Mater., 2020, vol. 186, pp. 425–33.10.1016/j.actamat.2020.01.004 ↗
53. A.J. Goodfellow, E.I. Galindo-Nava, K.A. Christofidou, N.G. Jones, C.D. Boyer, T.L. Martin, and H.J. Stone: Acta Mater., 2018, vol. 153, pp. 290–302.10.1016/j.actamat.2018.04.064 ↗
54. R. Labusch: Phys. Status Solidi B, 1970, vol. 41(2), pp. 659–69.10.1002/pssb.19700410221 ↗
55. D. Barba, T.M. Smith, J. Miao, M.J. Mills, and R.C. Reed: Metall Mater. Trans. A, 2018, vol. 49(9), pp. 4173–85.10.1007/s11661-018-4567-6 ↗
56. M. Dodaran, A.H. Ettefagh, S.M. Guo, M.M. Khonsari, W.J. Meng, N. Shamsaei, and S. Shao: Intermetallics, 2020, vol. 117, 106670.10.1016/j.intermet.2019.106670 ↗
57. D.J. Crudden, A. Mottura, N. Warnken, B. Raeisinia, and R.C. Reed: Acta Mater., 2014, vol. 75, pp. 356–70.10.1016/j.actamat.2014.04.075 ↗
58. T. Kruml, E. Conforto, B.L. Piccolo, D. Caillard, and J.L. Martin: Acta Mater., 2002, vol. 50(20), pp. 5091–5101.10.1016/S1359-6454(02)00364-6 ↗
59. T.H. Courtney: Mechanical Behavior of Materials, Waveland Press, Oxford, 2005.
60. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall Mater. Trans. A, 2009, vol. 40(7), pp. 1588–1603.10.1007/s11661-009-9858-5 ↗
61. Y.K. Kim, D. Kim, H.K. Kim, E.Y. Yoon, Y. Lee, C.S. Oh, and B.J. Lee: Int. J. Plast., 2018, vol. 110, pp. 123–44.10.1016/j.ijplas.2018.06.011 ↗
62. G.B. Viswanathan, P.M. Sarosi, M.F. Henry, D.D. Whitis, W.W. Milligan, and M.J. Mills: Acta Mater., 2005, vol. 53(10), pp. 3041–57.10.1016/j.actamat.2005.03.017 ↗