journal article·2022-11Open access

Low-Temperature Superplastic Deformation of Cold-Rolled Fe–5.6Mn–1.1Al–0.2C Steel

Hongtao Zhang, Minghui Cai, Wanjun Zhu, Shenghui Sun, Haile Yan, Shengjie Yao, Yikun Luan, Shuai Tang, P. D. Hodgson

Abstract

A cold-rolled low Al-added medium Mn steel was employed to investigate the low-temperature superplastic deformation at a relatively high initial strain rate of 10–2 s−1. The values of tensile ductility were measured to be 560 to 1170 pct at temperatures ranging from 655 °C to 745 °C. A maximum tensile elongation of 1170 pct was obtained at 745 °C and 10–2 s−1, which is the highest low-temperature-high-strain-rate superplasticity in the reported medium Mn steels. The superplastic flow behavior and deformation mechanisms of the low Al-added medium Mn steel were studied in detail by comparing the microstructural changes at various stages during both tensile deformation and isothermal annealing. In contrast to isothermal annealing, tensile deformation accelerated the dynamic recrystallization, phase transformation and partitioning of solid solution elements Mn/Al in austenite and ferrite, respectively. The representative microstructural features (equiaxed grains, random texture and sluggish grain growth) together with m ≈ 0.5 and Q ≈ ({Q}_{ ext{gb}}) indicate that Rachinger-type grain boundary sliding (GBS) was the predominant deformation mechanism which is accommodated through the movement of lattice dislocation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. A.H. Chokshi, A.K. Mukherjee, and T.G. Langdon: Mater. Sci. Eng. R Rep, 1993, vol. 10, pp. 237–74.10.1016/0927-796X(93)90009-R ↗
2. T.G. Langdon: J. Mater. Sci, 2009, vol. 44, pp. 5998–6010.10.1007/s10853-009-3780-5 ↗
3. M. Kawasaki and T.G. Langdon: J. Mater. Sci, 2007, vol. 42, pp. 1782–96.10.1007/s10853-006-0954-2 ↗
4. Y. Maehara and T.G. Langdon: Mater. Sci. Eng. A, 1990, vol. 128, pp. 1–3.10.1016/0921-5093(90)90090-P ↗
5. M. Sagradi, D. Pulino-Sagradi, and R.E. Medrano: Acta Mater., 1998, vol. 46, pp. 3857–62.10.1016/S1359-6454(98)00087-1 ↗
6. T. Wang, J. Hu, L.X. Du, G.S. Sun, and R.D.K. Misra: Mater. Lett., 2019, vol. 243, pp. 165–68.10.1016/j.matlet.2019.02.044 ↗
7. H. Zhang, L. Zhang, X.L. Cheng, and B.Z. Bai: Acta Mater, 2010, vol. 58, pp. 6173–80.10.1016/j.actamat.2010.07.037 ↗
8. Y.K. Lee and J. Han: Mater. Sci. Technol, 2015, vol. 31, pp. 843–56.10.1179/1743284714Y.0000000722 ↗
9. B. Hu, H.W. Luo, F. Yang, and H. Dong: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1457–64.10.1016/j.jmst.2017.06.017 ↗
10. Z.Y. Liang, Z.H. Cao, J. Lu, M.X. Huang, and C.C. Tasan: Acta Mater., 2021, vol. 221, 117418.10.1016/j.actamat.2021.117418 ↗
11. B.C. De Cooman, S.J. Lee, S. Shin, E.J. Seo, and J.G. Speer: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 39–45.10.1007/s11661-016-3821-z ↗
12. Z.X. Cao, G.L. Wu, X.J. Sun, C. Wang, D. Ponge, and W. Cao: Scr. Mater., 2018, vol. 152, pp. 27–30.10.1016/j.scriptamat.2018.03.046 ↗
13. J. Han, S.H. Kang, S.J. Lee, M. Kawasaki, H.J. Lee, D. Ponge, D. Raabe, and Y.K. Lee: Nat. Commun., 2017, vol. 8, p. 751.10.1038/s41467-017-00814-y ↗
14. W.J. Zhang, H.H. Liu, H. Ding, and H. Fujii: Mater. Sci. Eng. A, 2020, vol. 785, 139390.10.1016/j.msea.2020.139390 ↗
15. W.J. Zhang, H. Ding, M.H. Cai, W.J. Yang, and J.Z. Li: Mater. Sci. Eng. A, 2019, vol. 764, 138261.10.1016/j.msea.2019.138261 ↗
16. A.V. Mikhaylovskaya, A.O. Mosleh, P. Mestre-Rinn, A.D. Kotov, M.N. Sitkina, A.I. Bazlov, and D.V. Louzguine-Luzgin: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 293–302.10.1007/s11661-020-06058-8 ↗
17. W.Q. Cao, C.X. Huang, C. Wang, H. Dong, and Y.Q. Weng: Sci. Rep., 2017, vol. 7, p. 9199.10.1038/s41598-017-09493-7 ↗
18. H. Kamoutsi, E. Gioti, G.N. Haidemenopoulos, Z.H. Cai, and H. Ding: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 4841–46.10.1007/s11661-015-3118-7 ↗
19. M. Tikhonova, V. Torganchuk, F. Brasche, D.A. Molodov, A. Belyakov, and R. Kaibyshev: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 4245–56.10.1007/s11661-019-05340-8 ↗
20. S.H. Sun, M.H. Cai, H. Ding, H.S. Huang, and H.J. Pan: Mater. Sci. Eng. A, 2021, vol. 802, 140658.10.1016/j.msea.2020.140658 ↗
21. M.H. Cai, Z. Li, Q. Chao, and P.D. Hodgson: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5624–34.10.1007/s11661-014-2504-x ↗
22. R.D.K. Misra, J. Hu, I.V.S. Yashwanth, V.S.A. Challa, L.X. Du, G.S. Sun, and H. Xie: Mater. Sci. Eng. A, 2016, vol. 668, pp. 105–11.10.1016/j.msea.2016.05.052 ↗
23. J. Wadsworth and O.D. Sherby: J. Mater. Sci., 1978, vol. 13, pp. 2645–49.10.1007/BF02402751 ↗
24. N. Özdemir and N. Orhan: Mater. Des., 2006, vol. 27, pp. 706–09.10.1016/j.matdes.2004.12.018 ↗
25. O.D. Sherby, B. Walser, C.M. Young, and E.M. Cady: Scr. Metall., 1975, vol. 9, pp. 569–73.10.1016/0036-9748(75)90352-X ↗
26. J.K. Li, X.P. Ren, and X.D. Gao: Mater. Charact., 2020, vol. 164, 110320.10.1016/j.matchar.2020.110320 ↗
27. M.H. Cai, H.S. Huang, J.H. Su, H. Ding, and P.D. Hodgson: J. Mater. Sci. Technol., 2018, vol. 34, pp. 1428–35.10.1016/j.jmst.2017.12.008 ↗
28. H.R. Jafarian, S.H.M. Anijdan, and H. Miyamoto: Mater. Sci. Eng. A, 2020, vol. 795, 140015.10.1016/j.msea.2020.140015 ↗
29. S.S. Sohn, D.G. Kim, Y.H. Jo, A.K. da Silva, W. Lu, A.J. Breen, B. Gault, and D. Ponge: Acta Mater., 2020, vol. 194, pp. 106–17.10.1016/j.actamat.2020.03.048 ↗
30. E. Alabort, P. Kontis, D. Barba, K. Dragnevski, and R.C. Reed: Acta Mater., 2016, vol. 105, pp. 449–63.10.1016/j.actamat.2015.12.003 ↗
31. Y.X. Li, P.F. Gao, J.Y. Yu, S. Jin, S.Q. Chen, and M. Zhan: J. Mater. Sci. Technol., 2022, vol. 98, pp. 72–86.10.1016/j.jmst.2021.05.008 ↗
32. W. Wang, M.X. Yang, D.S. Yan, P. Jiang, F.P. Yuan, and X.L. Wu: Mater. Sci. Eng. A, 2017, vol. 702, pp. 133–41.10.1016/j.msea.2017.07.011 ↗
33. K. Arun Babu, V. Subramanya Sarma, C.N. Athreya, and K.A. Padmanabhan: Mater. Sci. Eng. A, 2016, vol. 657, pp. 185–96.10.1016/j.msea.2016.01.054 ↗
34. F.C. Liu, Z.Y. Ma, and F.C. Zhang: J. Mater. Sci. Technol., 2012, vol. 28, pp. 1025–30.10.1016/S1005-0302(12)60168-6 ↗
35. W.J. Zhang, H. Ding, M.H. Cai, W.J. Yang, and J.Z. Li: Mater. Sci. Eng. A, 2018, vol. 727, pp. 90–96.10.1016/j.msea.2018.03.009 ↗
36. H. Zhang, K.G. Pradeep, S. Mandal, D. Ponge, P. Choi, C.C. Tasan, and D. Raabe: Acta Mater., 2014, vol. 63, pp. 232–44.10.1016/j.actamat.2013.10.034 ↗
37. H. Zhang, D. Ponge, and D. Raabe: Mater. Sci. Eng. A, 2014, vol. 610, pp. 355–69.10.1016/j.msea.2014.05.061 ↗
38. L.P. Kubin and A. Mortensen: Scr. Mater., 2003, vol. 48, pp. 119–25.10.1016/S1359-6462(02)00335-4 ↗
39. D.S. Wilkinson and C.H. Cáceres: Acta Metall., 1984, vol. 32, pp. 1335–45.10.1016/0001-6160(84)90079-8 ↗
40. F.R. Cao, J.Z. Cui, J.L. Wen, and L. Fang: J. Mater. Sci. Technol., 2000, vol. 16, pp. 55–58.10.1179/026708300773002663 ↗
41. O.A. Yakovtseva, A.V. Mikhaylovskaya, A.V. Pozdniakov, A.D. Kotov, and V.K. Portnoy: Mater. Sci. Eng. A, 2016, vol. 674, pp. 135–43.10.1016/j.msea.2016.07.053 ↗
42. M.C. Jo, J.H. Choi, H. Lee, A. Zargaran, J.H. Ryu, S.S. Sohn, N.J. Kim, and S. Lee: Mater. Sci. Eng. A, 2019, vol. 740–741, pp. 16–27.10.1016/j.msea.2018.10.065 ↗
43. D. Simonovic and M.H.F. Sluiter: Phys. Rev. B, 2009, vol. 79, 054304.10.1103/PhysRevB.79.054304 ↗
44. M.H. Zhang, H.Y. Chen, Y.K. Wang, S.J. Wang, R.G. Li, S.L. Li, and Y.D. Wang: J. Mater. Sci. Technol., 2019, vol. 35, pp. 1779–86.10.1016/j.jmst.2019.04.007 ↗
45. H. Masuda and E. Sato: Acta Mater., 2020, vol. 197, pp. 235–52.10.1016/j.actamat.2020.07.042 ↗
46. K. Murali and N. Chandra: Mater. Sci. Eng. A, 1995, vol. 43, pp. 1783–90.
47. M.F. Ashby and R.A. Verrall: Acta Metall., 1973, vol. 21, pp. 149–63.10.1016/0001-6160(73)90057-6 ↗
48. A. Ball: Mater. Sci. Eng. A, 1997, vol. 234–236, pp. 365–69.10.1016/S0921-5093(97)00157-3 ↗
49. R.C. Gifkins: Metall. Mater. Trans. A, 1976, vol. 7A, pp. 1225–32.10.1007/BF02656607 ↗
50. T.G. Langdon: J. Mater. Sci., 2006, vol. 41, pp. 597–609.10.1007/s10853-006-6476-0 ↗
51. K.A. Padmanabhan: Mater. Sci. Eng., 1977, vol. 29, pp. 1–8.10.1016/0025-5416(77)90140-9 ↗
52. K.A. Padmanabhan and M.R. Basariya: Mater. Sci. Eng. A, 2019, vol. 744, pp. 704–15.10.1016/j.msea.2018.12.086 ↗
53. S.H. Kang, S.W. Choi, Y.D. Im, and Y.K. Lee: Mater. Sci. Eng. A, 2020, vol. 780, 139174.10.1016/j.msea.2020.139174 ↗
54. W.A. Rachinger: J. Inst. Met., 1952, vol. 81, pp. 33–41.
55. E. Alabort, D. Putman, and R.C. Reed: Acta Mater., 2015, vol. 95, pp. 428–42.10.1016/j.actamat.2015.04.056 ↗
56. C.T. Wang, Y. He, and T.G. Langdon: Acta Mater, 2020, vol. 185, pp. 245–56.10.1016/j.actamat.2019.11.064 ↗
57. W.A. Backofen: Trans. ASM, 1964, vol. 54, pp. 980–90.
58. B. Walser and O.D. Sherby: Metall. Mater. Trans. A, 1979, vol. 10A, pp. 1461–71.10.1007/BF02812011 ↗
59. B.H. Zhang: AIP Adv., 2014, vol. 4, 017128.10.1063/1.4863462 ↗
60. O.A. Kaibyshev: Superplasticity of Alloys, Intermetallides and Ceramics, Springer, Berlin, 1992.10.1007/978-3-642-84673-1 ↗