journal article·2022-08Open access

Effect of Aluminum Content on the Dynamic Recrystallization of Fe18MnxAl0.74C Steels During Hot-Forging Treatments

J. S. Rodriguez, J. F. Duran, Y. Aguilar, G. A. Perez Alcazar, R. M. Souza, O. A. Zambrano

Abstract

Abstract In the present work, the dynamic recrystallization and microstructural evolution of the family of advanced high-strength steels Fe18MnxAl0.74C are studied, varying the aluminum content in 0, 3, 6, and 9 wt pct subjected to hot-forging treatments through three consecutive heating-deformation cycles. For characterization, X-ray diffraction (XRD), Mössbauer absorption spectroscopy (MAS), and electron backscattering diffraction (EBSD) were used. It was determined that for the steels under study, dynamic recrystallization occurs due to strain-induced boundary migration (SIBM) and is strongly influenced by the aluminum content of the alloy and its stacking failure energy (SFE), increasing that the aluminum content will generate greater nucleation sites, favoring the refinement of grains in the material and achieving a crystalline structure of random crystallographic orientation. The results are discussed throughout the article, allowing us to determine potential processing routes for advanced high-strength steels with predominantly plastic deformation mechanisms such as transformation-induced plasticity (TRIP), twinning-induced plasticity (TWIP), and microband-induced plasticity (MBIP).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. X. Cui, H. Zhang, S. Wang, L. Zhang, and J. Ko: Mater. Des., 2011, vol. 32, pp. 815–21.10.1016/j.matdes.2010.07.018 ↗
2. K. Kawajiri, M. Kobayashi, and K. Sakamoto: J. Clean. Prod., 2020, vol. 253, pp. 119805–13.10.1016/j.jclepro.2019.119805 ↗
3. O.A. Zambrano: J. Mater. Sci., 2018, vol. 53, pp. 14003–62.10.1007/s10853-018-2551-6 ↗
4. S. Chen, R. Rana, A. Halder, and R.K. Ray: Prog. Mater. Sci., 2017, vol. 89, pp. 345–91.10.1016/j.pmatsci.2017.05.002 ↗
5. B.C. De Cooman, L. Chen, H. Soo Kim, Y. Estrin, S.K. Kim, and H. Voswinckel: Microstructure and Texture in Steels, Springer, New York, 2009, pp. 165–83.10.1007/978-1-84882-454-6_10 ↗
6. G. Frommeyer and U. Brüx: Steel Res. Int., 2006, vol. 77, pp. 627–33.10.1002/srin.200606440 ↗
7. Y. Sutou, N. Kamiya, R. Umino, I. Ohnuma, and K. Ishida: ISIJ Int., 2010, vol. 50, pp. 893–99.10.2355/isijinternational.50.893 ↗
8. G. Frommeyer, E.J. Drewes, and B. Engl: Rev. Métall., 2000, vol. 97, pp. 1245–53.10.1051/metal:2000110 ↗
9. H. Kim, D.-W. Suh, and N.J. Kim: Sci. Technol. Adv. Mater., 2013, vol. 14, pp. 14205–116.10.1088/1468-6996/14/1/014205 ↗
10. Y.-U. Heo, Y.-Y. Song, S.-J. Park, H.K.D.H. Bhadeshia, and D.-W. Suh: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1731–35.10.1007/s11661-012-1149-x ↗
11. A. Sarkar, S. Sanyal, T.K. Bandyopadhyay, and S. Mandal: Mater. Sci. Eng. A, 2017, vol. 703, pp. 205–13.10.1016/j.msea.2017.07.045 ↗
12. O.A. Zambrano, Y. Aguilar, J. Valdés, S.A. Rodríguez, and J.J. Coronado: Wear, 2016, vol. 348–349, pp. 61–68.10.1016/j.wear.2015.11.019 ↗
13. A. Kovalev, A. Jahn, A. Weiß, and P.R. Scheller: Steel Res Int., 2011, vol. 82, pp. 45–50.10.1002/srin.201000245 ↗
14. L. Zhang, R. Song, C. Zhao, and F. Yang: Mater. Sci. Eng. A, 2015, vol. 640, pp. 225–34.10.1016/j.msea.2015.05.108 ↗
15. J. Moon, S.-J. Park, J.H. Jang, T.-H. Lee, C.-H. Lee, H.-U. Hong, D.-W. Suh, S.H. Kim, H.N. Han, and B.H. Lee: Scripta Mater., 2017, vol. 127, pp. 97–101.10.1016/j.scriptamat.2016.08.036 ↗
16. A. Soulami, K.S. Choi, Y.F. Shen, W.N. Liu, X. Sun, and M.A. Khaleel: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1402–08.10.1016/j.msea.2010.10.031 ↗
17. J.D. Yoo and K.-T. Park: Mater. Sci. Eng. A, 2008, vol. 496, pp. 417–24.10.1016/j.msea.2008.05.042 ↗
18. O.A. Zambrano, J. Valdés, L.A. Rodriguez, D. Reyes, E. Snoeck, S.A. Rodríguez, and J.J. Coronado: Tribol. Int., 2019, vol. 135, pp. 421–31.10.1016/j.triboint.2019.03.002 ↗
19. O.A. Zambrano, J. Valdés, Y. Aguilar, J.J. Coronado, S.A. Rodríguez, and R.E. Logé: Mater. Sci. Eng. A, 2017, vol. 689, pp. 269–85.10.1016/j.msea.2017.02.060 ↗
20. B.-G. Zhang, X.-M. Zhang, and H.-T. Liu: Mater. Sci. Eng. A, 2020, vol. 793, pp. 139289–301.10.1016/j.msea.2020.139289 ↗
21. J.H. Choi, M.C. Jo, H. Lee, A. Zargaran, T. Song, S.S. Sohn, N.J. Kim, and S. Lee: Acta Mater., 2019, vol. 166, pp. 246–60.10.1016/j.actamat.2018.12.044 ↗
22. S. Lee, Y. Estrin, and B.C. De Cooman: Metall. Mater. Trans. A, 2014, vol. 45, pp. 717–30.10.1007/s11661-013-2028-9 ↗
23. D.P. Field, L.T. Bradford, M.M. Nowell, and T.M. Lillo: Acta Mater., 2007, vol. 55, pp. 4233–41.10.1016/j.actamat.2007.03.021 ↗
24. U. Brüx, G. Frommeyer, O. Grässel, L.W. Meyer, and A. Weise: Steel Res. Int., 2002, vol. 73, pp. 294–98.10.1002/srin.200200211 ↗
25. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409.10.1016/S0749-6419(00)00015-2 ↗
26. H. Gwon, S. Shin, J. Jeon, T. Song, S. Kim, and B.C. De Cooman: Met. Mater. Int., 2019, vol. 25, pp. 594–605.10.1007/s12540-018-00224-9 ↗
27. K.K. Anand, B. Mahato, C. Haase, A. Kumar, and S.G. Chowdhury: Mater. Sci. Eng. A, 2018, vol. 711, pp. 69–77.10.1016/j.msea.2017.11.009 ↗
28. H. Liu, J. Liu, Wu. Bowei, Y. Shen, Y. He, H. Ding, and Su. Xiaofeng: Mater. Sci. Eng. A, 2017, vol. 708, pp. 360–74.10.1016/j.msea.2017.10.001 ↗
29. E. Welsch, D. Ponge, S.M.H. Haghighat, S. Sandlöbes, P. Choi, M. Herbig, S. Zaefferer, and D. Raabe: Acta Mater., 2016, vol. 116, pp. 188–99.10.1016/j.actamat.2016.06.037 ↗
30. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2011, vol. 59, pp. 6449–62.10.1016/j.actamat.2011.07.009 ↗
31. K.-T. Park, K.G. Jin, S.H. Han, S.W. Hwang, K. Choi, and C.S. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3651–61.10.1016/j.msea.2010.02.058 ↗
32. J.A. Castañeda, O.A. Zambrano, G.A. Alcázar, S.A. Rodríguez, and J.J. Coronado: Metals, 2021, vol. 11, pp. 1701–21.10.3390/met11111701 ↗
33. D. Liu, H. Ding, M. Cai, and D. Han: J. Mater. Eng. Perform., 2019, vol. 28, pp. 5116–26.10.1007/s11665-019-04200-1 ↗
34. Wu. Zhiqiang, Y. Tang, W. Chen, Lu. Liwei, E. Li, Z. Li, and H. Ding: Vacuum, 2019, vol. 159, pp. 447–55.10.1016/j.vacuum.2018.10.079 ↗
35. Y. Chen, X.-M. Zhang, Z.-H. Cai, H. Ding, M.-M. Pan, and H.-S. Li: J. Mater. Eng. Perform., 2020, vol. 29, pp. 5503–14.10.1007/s11665-020-05011-5 ↗
36. S. Mandal, A.K. Bhaduri, and V.S. Sarma: Materials Science Forum, Trans Tech Publ, Zurich, 2012, pp. 714–17.
37. S. Mandal, M. Jayalakshmi, A.K. Bhaduri, and V.S. Sarma: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5645–56.10.1007/s11661-014-2480-1 ↗
38. D. Jia, W. Sun, Xu. Dongsheng, Yu. Lianxu, X. Xin, W. Zhang, and F. Qi: J. Alloys Compd., 2019, vol. 787, pp. 196–205.10.1016/j.jallcom.2019.02.055 ↗
39. X. Wang, D. Wang, J. Jin, and J. Li: Mater. Sci. Eng. A, 2019, vol. 761, pp. 138044–57.10.1016/j.msea.2019.138044 ↗
40. H. Zhang, K. Zhang, H. Zhou, Lu. Zhen, C. Zhao, and X. Yang: Mater. Des., 2015, vol. 80, pp. 51–62.10.1016/j.matdes.2015.05.004 ↗
41. Y. Cao, H. Di, J. Zhang, J. Zhang, T. Ma, and R.D.K. Misra: Mater. Sci. Eng. A, 2013, vol. 585, pp. 71–85.10.1016/j.msea.2013.07.037 ↗
42. M.A. Meyers, U.R. Andrade, and A.H. Chokshi: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2881–93.10.1007/BF02669646 ↗
43. Y. Liu, Y. Huang, M. Guan, X. Meng, and Y. Xie: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 3349–53.10.1007/s11661-020-05765-6 ↗
44. S.S.S. Kumar, T. Raghu, P.P. Bhattacharjee, G.A. Rao, and U. Borah: J. Alloys Compd., 2016, vol. 681, pp. 28–42.10.1016/j.jallcom.2016.04.185 ↗
45. O.A. Zambrano: J. Eng. Mater. Technol., 2016, vol. 138, pp. 1–9.10.1115/1.4033632 ↗
46. A.C. Larson and R.B. Von Dreele, In Los Alamos National Laboratory, (1994), p 231.
47. O.A. Zambrano and R.E. Logé: Mater. Charact., 2019, vol. 152, pp. 151–61.10.1016/j.matchar.2019.04.016 ↗
48. O.A. Zambrano, G. Tressia, and R.M. Souza: Eng. Fail. Anal., 2020, vol. 115, pp. 104621–45.10.1016/j.engfailanal.2020.104621 ↗
49. P. Gütlich, E. Bill, and A.X. Trautwein: Mössbauer spectroscopy and transition metal chemistry: fundamentals and applications, Springer, New York, 2010.
50. J.F. Durán, G.A. Pérez, J.S. Rodríguez, Y. Aguilar, R.E. Logé, and O.A. Zambrano: Metall. Mater. Trans. A, 2021, vol. 52, pp. 4785–99.10.1007/s11661-021-06424-0 ↗
51. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas: Prog. Mater Sci., 2014, vol. 60, pp. 130–207.10.1016/j.pmatsci.2013.09.002 ↗
52. B. Xie, Yu. Hao, T. Sheng, Y. Xiong, Y. Ning, and M.W. Fu: J. Alloys Compd., 2019, vol. 803, pp. 16–29.10.1016/j.jallcom.2019.06.202 ↗
53. S.-C. Chen, C.-Y. Huang, Y.-T. Wang, and H.-W. Yen: Mater. Des., 2017, vol. 134, pp. 434–45.10.1016/j.matdes.2017.08.074 ↗
54. W. Wang, F. Brisset, A.L. Helbert, D. Solas, I. Drouelle, M.H. Mathon, and T. Baudin: Mater. Sci. Eng. A, 2014, vol. 589, pp. 112–18.10.1016/j.msea.2013.09.071 ↗
55. V.G. Gavriljuk, B.D. Shanina, and H. Berns: Acta Mater., 2000, vol. 48, pp. 3879–93.10.1016/S1359-6454(00)00192-0 ↗
56. J.M. Greneche: J. Non-Cryst. Solids, 2001, vol. 287, pp. 37–44.10.1016/S0022-3093(01)00634-2 ↗
57. V.V. Ovchinnikov: Mössbauer Analysis of the Atomic and Magnetic Structure of Alloys, Cambridge Int Science Publishing, Cambridge, 2006.
58. M. Filatov: Coord. Chem. Rev., 2009, vol. 253, pp. 594–605.10.1016/j.ccr.2008.05.002 ↗
59. T. Ericsson and J.B. Cohen: Acta Crystallogr. Sect. A, 1971, vol. 27, pp. 97–109.10.1107/S0567739471000226 ↗
60. K.C. Russel and D.F. Smith: in Physical Metallurgy of Controlled Expansion Invar-Type Alloys. Proceedings, K.C. Russel, D.F. Smith, eds., TMS, Warrendale, 1990, 331 p. ISBN 0-87339-099-7.
61. C.R. Houska and B.L. Averbach: J. Phys. Chem. Solids, 1962, vol. 23, pp. 1763–69.10.1016/0022-3697(62)90215-9 ↗
62. W.-C. Cheng, C.-Y. Cheng, C.-W. Hsu, and D.E. Laughlin: Mater. Sci. Eng. A, 2015, vol. 642, pp. 128–35.10.1016/j.msea.2015.06.096 ↗
63. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 3rd ed. Elsevier, New York, 2017.
64. D.E. Laughlin and K. Hono: Physical Metallurgy, Newnes, Oxford, 2014.
65. J.E. Bailey and P.B. Hirsch: Proc. R. Soc. Lond. Ser A, 1962, vol. 267, pp. 11–13.10.1098/rspa.1962.0080 ↗
66. I. Ohnuma, K. Ishida, and T. Nishizawa: Philos. Mag. A, 1999, vol. 79, pp. 1131–44.10.1080/01418619908210351 ↗
67. J.H. Park, Y. Tomota, and M.Y. Wey: Mater. Sci. Technol., 2002, vol. 18, pp. 1517–23.10.1179/026708302225007646 ↗
68. R.W. Balluffi, S.M. Allen, and W.C. Carter: Kinetics of Materials, Wiley, New York, 2005.10.1002/0471749311 ↗
69. C.S. Pande, M.A. Imam, and B.B. Rath: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 2891–96.10.1007/BF02647209 ↗
70. H. Gleiter: Acta Metall., 1969, vol. 17, pp. 1421–28.10.1016/0001-6160(69)90004-2 ↗
71. K.-H. Song, Y.B. Chun, and S.-K. Hwang: Mater. Sci. Eng. A, 2007, vol. 454, pp. 629–36.10.1016/j.msea.2006.11.151 ↗
72. S. Mahajan, C.S. Pande, M.A. Imam, and B.B. Rath: Acta Mater., 1997, vol. 45, pp. 2633–38.10.1016/S1359-6454(96)00336-9 ↗
73. X. Yang, P. Wang, and M. Huang: Mater. Sci. Eng. A, 2022, vol. 833, pp. 142532–41.10.1016/j.msea.2021.142532 ↗