Production and Characterization of a Modified Hot Work Tool Steel by Laser Powder Bed Fusion
Source abstract
Abstract
Conventional hot work tool steels with medium carbon content, fabricated by laser powder bed fusion (L-PBF), are susceptible to cracking. To reduce this risk, as in well-established welding process, usually preheating or in-situ heating needs to be applied. In order to address this issue, a modified grade, with lower carbon wt pct, is proposed to fabricate parts showing less susceptibility to cracking. The microstructure was studied in the as-built condition and after direct double tempering for 2 hours each at 625 °C and 650 °C. Tensile properties and hardness were compared with those of wrought and (L-PBF) processed AISI H13. The results confirm improved printing performance of the new steel grade and the possibility of achieving similar hardness and strength by proper tempering treatment.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. N. Haghdadi, M. Laleh, M. Moyle, and S. Primig: J Mater Sci., 2021, vol. 56, pp. 64–107.10.1007/s10853-020-05109-0 ↗
2. S. Ford and M. Despeisse: J. Clean. Prod., 2016, vol. 137, pp. 1573–87.10.1016/j.jclepro.2016.04.150 ↗
3. P. Bajaj, A. Hariharan, A. Kini, P. Kürnsteiner, D. Raabe, and E.A. Jägle: Mater. Sci. Eng. A., 2020, vol. 772, p. 138633.10.1016/j.msea.2019.138633 ↗
4. T. Skaare and N. Asnafi: IOP Conf. Ser.: Mater. Sci. Eng., 2020, vol. 967, p. 012040.10.1088/1757-899X/967/1/012040 ↗
5. M. Pellizzari, B. AlMangour, M. Benedetti, S. Furlani, D. Grzesiak, and F. Deirmina: Theoret. Appl. Fract. Mech., 2020, vol. 108, pp. 102634–39.10.1016/j.tafmec.2020.102634 ↗
6. M. Åsberg, G. Fredriksson, S. Hatami, W. Fredriksson, and P. Krakhmalev: Mater. Sci. Eng. A., 2019, vol. 742, pp. 584–89.10.1016/j.msea.2018.08.046 ↗
7. J. Sjöström and J. Bergström: J. Mater. Process. Technol., 2004, vol. 153–154, pp. 1089–96.10.1016/j.jmatprotec.2004.04.158 ↗
8. J.J. Yan, D.L. Zheng, H.X. Li, X. Jia, J.F. Sun, Y.L. Li, M. Qian, and M. Yan: J. Mater. Sci., 2017, vol. 52, pp. 12476–85.10.1007/s10853-017-1380-3 ↗
9. D. Deng: Mater. Des., 2009, vol. 30, pp. 359–66.10.1016/j.matdes.2008.04.052 ↗
10. H. Murakawa, M. Béreš, C.M. Davies, S. Rashed, A. Vega, M. Tsunori, K.M. Nikbin, and D. Dye: Sci. Technol. Weld. Join., 2010, vol. 15, pp. 393–99.10.1179/136217110X12714217309614 ↗
11. J.A. Francis, H.J. Stone, S. Kundu, H.K.D.H. Bhadeshia, R.B. Rogge, P.J. Withers, and L. Karlsson: J. Pressure Vessel Technol., 2009, vol. 131, pp. 041401-041401–8.10.1115/1.3122036 ↗
12. R. Mertens, B. Vrancken, N. Holmstock, Y. Kinds, J.-P. Kruth, and J. Van Humbeeck: Phys. Proc., 2016, vol. 83, pp. 882–90.10.1016/j.phpro.2016.08.092 ↗
13. J. Krell, A. Röttger, K. Geenen, and W. Theisen: J. Mater. Process. Technol., 2018, vol. 255, pp. 679–88.10.1016/j.jmatprotec.2018.01.012 ↗
14. D. Barbier: Adv. Eng. Mater., 2014, vol. 16, pp. 122–27.10.1002/adem.201300116 ↗
15. N. Yurioka: ISIJ Int., 2001, vol. 41, pp. 566–70.10.2355/isijinternational.41.566 ↗
16. J.C. Ion, K.E. Easterling, and M.F. Ashby: Acta Metall., 1984, vol. 32, pp. 1949–62.10.1016/0001-6160(84)90176-7 ↗
17. H. Berns and F. Wendl: Steel Res., 1986, vol. 57, pp. 671–76.10.1002/srin.198600848 ↗
18. L.-Å. Norström, M. Svensson, and N. Öhrberg: Met. Technol., 1981, vol. 8, pp. 376–81.10.1179/030716981803275947 ↗
19. R. Rodríguez-Baracaldo, J.A. Benito, E.S. Puchi-Cabrera, and M.H. Staia: Wear., 2007, vol. 262, pp. 380–89.10.1016/j.wear.2006.06.010 ↗
20. F. Deirmina, N. Peghini, B. AlMangour, D. Grzesiak, and M. Pellizzari: Mater. Sci. Eng. A., 2019, vol. 753, pp. 109–21.10.1016/j.msea.2019.03.027 ↗
21. C.-Y. Chou, N.H. Pettersson, A. Durga, F. Zhang, C. Oikonomou, A. Borgenstam, J. Odqvist, and G. Lindwall: Acta Mater., 2021, vol. 2021, p. 117044.10.1016/j.actamat.2021.117044 ↗
22. E.A. Jägle, P.-P. Choi, J.V. Humbeeck, and D. Raabe: J. Mater. Res., 2014, vol. 29, pp. 2072–79.10.1557/jmr.2014.204 ↗
23. S. Amirabdollahian, F. Deirmina, M. Pellizzari, P. Bosetti, and A. Molinari: Mater. Sci. Eng. A., 2021, vol. 814, p. 141126.10.1016/j.msea.2021.141126 ↗
24. Y. Zhang, P. Lai, H. Jia, X. Ju, and G. Cui: Metals., 2019, https://doi.org/10.3390/met9010094.10.3390/met9010094 ↗
25. G. Carasi, B. Yu, E. Hutten, H. Zurob, R. Casati, and M. Vedani: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 2564–75.10.1007/s11661-021-06248-y ↗
26. Y.-Z. Zhao, Y.-H. Zhao, Q. Li, S.-L. Chen, J.-Y. Zhang, and K.-C. Chou: Intermetallics., 2009, vol. 17, pp. 491–95.10.1016/j.intermet.2008.12.006 ↗
27. C. Xia and S. Kou: Metall. Mater. Trans. B., 2021, vol. 52B, pp. 460–69.10.1007/s11663-020-02021-5 ↗
28. A. Eser, C. Broeckmann, and C. Simsir: Comput. Mater. Sci., 2016, vol. 113, pp. 280–91.10.1016/j.commatsci.2015.11.020 ↗
29. F. Deirmina and M. Pellizzari: Mater. Sci. Eng. A., 2019, vol. 743, pp. 349–60.10.1016/j.msea.2018.11.093 ↗
30. Development of hot-work tool steel for high-temperature applications: Metals Technol., 2020, https://doi.org/10.1179/030716981803275857.10.1179/030716981803275857 ↗
31. https://www.uddeholm.com/files/PB_orvar_supreme_english.pdf
32. T. Okuno: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 51–59.10.2355/isijinternational1966.27.51 ↗
33. G. Telasang, J.D. Majumdar, G. Padmanabham, and I. Manna: Mater. Sci. Eng. A., 2014, vol. 599, pp. 255–67.10.1016/j.msea.2014.01.083 ↗
34. J. Yan, H. Song, Y. Dong, W.-M. Quach, and M. Yan: Mater. Sci. Eng. A., 2020, vol. 773, pp. 138845–49.10.1016/j.msea.2019.138845 ↗