journal article·2022-04

Effects of Ultrasonic Vibration on Material Flow and Thermal Cycles in Friction Stir Welding of Dissimilar Al/Mg Alloys

Xueqi Lv, ChuanSong Wu, Zhen Sun

Publisher page

Abstract

Comparative experiments are performed in friction stir welding (FSW) of dissimilar Al/Mg alloys with and without assistance of ultrasonic vibration. Metallographic characterization of the welds at transverse cross sections reveals that ultrasonic vibration induces differences in plastic material flow in two conditions. In FSW, the plastic material in the peripheral area of shoulder-affected zone (SAZ) tends to flow downward because of the weakening of the driving force of the shoulder, and a plastic material insulation layer is formed at the SAZ edge. When ultrasonic vibration is exerted, the stirred zone is divided into the inner and outer shear layers, the downward material flow trend of the inner shear layer disappears and tends to flow upward, and the onion-ring structure caused by the swirl motion is avoided in the pin-affected zone. By improving the flow behavior of plastic materials in the stirred zone, ultrasonic vibration reduces the heat generation, accelerates the heat dissipation in nugget zone and changes the thermal cycles, thus inhibiting the formation of intermetallic compound layers.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. M. Haghshenas and A.P. Gerlich: Eng. Sci. Tech. Int J., 2018, vol. 21, pp. 130–48.
2. L. Liu, D. Ren, and F. Liu: Materials., 2014, vol. 7, pp. 3735–57.10.3390/ma7053735 ↗
3. L.H. Shah, N.H. Othman, and A. Gerlich: Sci. Tech. Weld. Join., 2018, vol. 23, pp. 256–70.10.1080/13621718.2017.1370193 ↗
4. Y.C. Chen and K. Nakata: Scripta Mater., 2008, vol. 58, pp. 433–36.10.1016/j.scriptamat.2007.10.033 ↗
5. V. Firouzdor and S. Kou: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 2914–35.10.1007/s11661-010-0340-1 ↗
6. V. Firouzdor and S. Kou: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 3238–51.10.1007/s11661-010-0366-4 ↗
7. A. Kostka, R.S. Coelho, S.J. Dos, and A.R. Pyzalla: Scripta. Mater., 2009, vol. 60, pp. 953–56.10.1016/j.scriptamat.2009.02.020 ↗
8. N. Yamamoto, J. Liao, S. Watanabe, and K. Nakata: Mater. Trans., 2009, vol. 50, pp. 2833–38.10.2320/matertrans.M2009289 ↗
9. O. Klag, J. Gröbner, G. Wagner, R. Schmid-Fetzer, and D. Eifler: Int. J. Mater. Res., 2014, vol. 105, pp. 145–55.10.3139/146.111003 ↗
10. J. Yan, Z. Xu, Z. Li, L. Li, and S. Yang: Scripta. Mater., 2005, vol. 53, pp. 585–89.10.1016/j.scriptamat.2005.04.022 ↗
11. M.A. Mofid: Metall. Mater. Trans. A., 2012, vol. 43A, pp. 5106–14.10.1007/s11661-012-1314-2 ↗
12. M.A. Mofid, Z.A. Abdollah, F.M. Ghaini, and C.H. Gür: Int. J. Adv. Manuf. Technol., 2014, vol. 71, pp. 1493–99.10.1007/s00170-013-5565-x ↗
13. Y. Zhao, S. Jiang, S. Yang, Z. Lu, and K. Yan: Int. J. Adv. Manuf. Technol., 2016, vol. 83, pp. 673–79.10.1007/s00170-015-7624-y ↗
14. W. Chang, S.R. Rajesh, C. Chun, and H.J. Kim: J. Mater. Sci. Tech., 2011, vol. 27, pp. 199–204.10.1016/S1005-0302(11)60049-2 ↗
15. S. Benfer, B. Straß, G. Wagner, and W. Fürbeth: Surf. Interface. Anal., 2016, vol. 48, pp. 843–52.10.1002/sia.5871 ↗
16. S. Ji, X. Meng, Z. Liu, R. Huang, and Z. Li: Mater. Lett., 2017, vol. 201, pp. 173–76.10.1016/j.matlet.2017.05.011 ↗
17. Z. Liu, X. Meng, S. Ji, Z. Li, and L. Wang: J. Manuf. Process., 2018, vol. 31, pp. 552–59.10.1016/j.jmapro.2017.12.022 ↗
18. X. Lv, C.S. Wu, C. Yang, and G.K. Padhy: J. Mater. Process. Technol., 2018, vol. 254, pp. 145–57.10.1016/j.jmatprotec.2017.11.031 ↗
19. X.Q. Lv, C.S. Wu, and G.K. Padhy: Mater. Lett., 2017, vol. 203, pp. 81–84.10.1016/j.matlet.2017.05.090 ↗
20. S. Kumar and C.S. Wu: J Alloys Compounds, 2020, vol. 827, p. 154343.10.1016/j.jallcom.2020.154343 ↗
21. S. Kumar, C.S. Wu, and S. Gao: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 2863–81.10.1007/s11661-020-05716-1 ↗
22. S. Amini and M.R. Amiri: Int. J. Adv. Manuf. Technol., 2014, vol. 73, pp. 127–35.10.1007/s00170-014-5806-7 ↗
23. L.E. Murr: J. Mater. Eng. Perform., 2010, vol. 19, pp. 1071–89.10.1007/s11665-010-9598-0 ↗
24. B. Li and Y. Shen: Mater. Des., 2011, vol. 32, pp. 3796–3802.10.1016/j.matdes.2011.03.029 ↗
25. U. Donatus, G.E. Thompson, X. Zhou, J. Wang, and K. Beamish: Mater. Des., 2015, vol. 83, pp. 203–13.10.1016/j.matdes.2015.06.006 ↗
26. G.R. Cui, Z.Y. Ma, and S.X. Li: Scripta Mater., 2008, vol. 58, pp. 1082–85.10.1016/j.scriptamat.2008.02.003 ↗
27. H.R. Doude, J.A. Schneider, and A.C. Nunes: Metall. Mater. Trans. A., 2014, vol. 45A, pp. 4411–22.10.1007/s11661-014-2384-0 ↗
28. X.C. Liu and C.S. Wu: J. Mater. Process. Technol., 2015, vol. 225, pp. 32–44.10.1016/j.jmatprotec.2015.05.020 ↗
29. M. Guerra, C. Schmidt, J.C. McClure, L.E. Murr, and A.C. Nunes: Mater. Charact., 2002, vol. 49, pp. 95–101.10.1016/S1044-5803(02)00362-5 ↗
30. G. Chen, H. Li, G. Wang, Z. Guo, S. Zhang, Q. Dai, et al.: Int. J. Mach. Tool. Manuf., 2018, vol. 124, pp. 12–21.10.1016/j.ijmachtools.2017.09.002 ↗
31. H. Izadi, J. Fallu, A. Abdel-Gwad, T. Liyanage, and A.P. Gerlich: Sci. Technol. Weld. J., 2013, vol. 18, pp. 307–13.10.1179/1362171813Y.0000000107 ↗
32. Z.H. Yao, G.Y. Kin, Z.H. Wang, L. Faidley, Q.Z. Zou, D.Q. Mei, and Z.C. Chen: Int. J. Plast., 2012, vol. 39, pp. 75–87.10.1016/j.ijplas.2012.06.003 ↗
33. C.L. Yang, C.S. Wu, and L. Shi: J. Manuf. Proc., 2018, vol. 35, pp. 118–26.10.1016/j.jmapro.2018.07.025 ↗