journal article·2022-03Open access

Effect of Nucleant Particle Agglomeration on Grain Size

Feng Gao, Zhongyun Fan

Abstract

Abstract Solute accumulation/depletion in the liquid around a growing solid particle during the solidification of metallic melts creates a constitutionally supercooled (CS) zone that has a significant effect on the final solidified grain structure. In this paper, we introduce two mechanisms related to the CS zone that affect grain size: one is the grain initiation free zone (GIFZ) that describes the inability of nucleant particles located in the CS zone for grain initiation and the other is re-melting (RM) of solid particles due to overlap of CS zones. Based on these two mechanisms, we have systematically analysed the effect of nucleant particle agglomeration on grain size. We found that nucleant particle agglomeration has a significant effect on grain size and is responsible for the discrepancy between theoretically predicted grain size and the experimental data. In addition, our numerical analysis suggests that under normal solidification conditions relevant to industrial practice solid particle re-melting has little effect on grain size and thus may be ignored during theoretical analysis. A practical implication from this work is that significant grain refinement can be achieved by dispersing the nucleant particles in the melt prior to solidification.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. M. Easton and D. StJohn: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 1613–23.10.1007/s11661-999-0098-5 ↗
2. T.E. Quested: Mater. Sci. Technol., 2004, vol. 20, pp. 1357–69.10.1179/026708304225022359 ↗
3. A.L. Greer: J. Chem. Phys., 2016, vol. 145, p. 211704.10.1063/1.4968846 ↗
4. M.A. Easton, M. Qian, A. Prasad, and D.H. StJohn: Curr. Opin. Solid State Mater. Sci., 2016, vol. 20, pp. 13–24.10.1016/j.cossms.2015.10.001 ↗
5. Z. Liu: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 4755–76.10.1007/s11661-017-4275-7 ↗
6. M.A. Easton, A. Prasad, D. Qiu, M.A. Gibson, M. Qian, M. Brandt, G. Wang, and D.H. St John: SP17-Solidification Processing 2017. Old Windsor, UK, July 2017, pp. 87–90.
7. W.A. Tiller, K.A. Jackson, J.W. Rutter, and B. Chalmers: Acta Metall., 1953, vol. 4, pp. 428–37.10.1016/0001-6160(53)90126-6 ↗
8. I. Maxwell and A. Hellawell: Acta Metall., 1975, vol. 23, pp. 229–37.10.1016/0001-6160(75)90188-1 ↗
9. A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans, and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823–35.10.1016/S1359-6454(00)00094-X ↗
10. J.W. Rutter and B. Chalmers: Can. J. Phys., 1953, vol. 31, pp. 15–39.10.1139/p53-003 ↗
11. W. Winegard and B. Chalmers: Trans. ASM., 1954, vol. 46, pp. 1214–24.
12. M. Qian, P. Cao, M.A. Easton, S.D. McDonald, and D.H. StJohn: Acta Mater., 2010, vol. 58, pp. 3262–70.10.1016/j.actamat.2010.01.052 ↗
13. D.H. StJohn, M. Qian, M.A. Easton, and P. Cao: Acta Mater., 2011, vol. 59, pp. 4907–21.10.1016/j.actamat.2011.04.035 ↗
14. E. Quested and A.L. Greer: Acta Mater., 2005, vol. 53, pp. 4643–53.10.1016/j.actamat.2005.06.018 ↗
15. D. Shu, B. Sun, J. Mi, and P.S. Grant: Acta Mater., 2011, vol. 59, pp. 2135–44.10.1016/j.actamat.2010.12.014 ↗
16. Q. Du and Y. Li: Acta Mater., 2014, vol. 71, pp. 380–9.10.1016/j.actamat.2014.03.028 ↗
17. A. Prasad, L. Yuan, P.D. Lee, and D.H. StJohn: Acta Mater., 2013, vol. 61, pp. 5914–27.10.1016/j.actamat.2013.06.015 ↗
18. Y. Xu, D. Casar, Q. Du, R.H. Mathiesen, L. Arnberg, and Y. Li: Acta Mater., 2017, vol. 140, pp. 224–39.10.1016/j.actamat.2017.08.053 ↗
19. Y. Xu, D. Casari, R.H. Mathiesen, and Y. Li: Acta Mater., 2018, vol. 149, pp. 312–25.10.1016/j.actamat.2018.02.058 ↗
20. E. Liotti, C. Arteta, A. Zisserman, A. Lui, V. Lempitsky, and P.S. Grant: Sci. Adv., 2018, vol. 4, p. eaar4004.10.1126/sciadv.aar4004 ↗
21. Y. Jia, H. Huang, Y. Fu, G. Zhu, D. Shu, B. Sun, and D.H. StJohn: Sci. Mater., 2019, vol. 167, pp. 6–10.
22. D.H. StJohn, A. Prasad, M.A. Easton, and M. Qian: Metall. Mater. Trans. A., 2015, vol. 46A, pp. 4868–85.10.1007/s11661-015-2960-y ↗
23. Z. Fan, F. Gao, B. Jiang, and Z.P. Que: Sci. Rep., 2020, vol. 10, p. 9448.10.1038/s41598-020-66190-8 ↗
24. Z. Fan: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 1409–18.10.1007/s11661-012-1495-8 ↗
25. Z. Fan and H. Men: Mater. Res. Express., 2020, vol. 7, p. 126501.10.1088/2053-1591/abcc89 ↗
26. H. Men and Z. Fan: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 2766–77.10.1007/s11661-018-4628-x ↗
27. B. Jiang, H. Men, and Z. Fan: Comput. Mater. Sci., 2018, vol. 153, pp. 73–81.10.1016/j.commatsci.2018.06.005 ↗
28. C.M. Fang and Z. Fan: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 788–97.10.1007/s11661-019-05495-4 ↗
29. C.M. Fang and Z. Fan: Comput. Mater. Sci., 2020, vol. 171, p. 109258.10.1016/j.commatsci.2019.109258 ↗
30. C.M. Fang, H. Men, and Z. Fan: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 6231–42.10.1007/s11661-018-4882-y ↗
31. S.R. Bakshi, D. Lahiri, and A. Agarwal: Int. Mater. Rev., 2010, vol. 55, pp. 41–64.10.1179/095066009X12572530170543 ↗
32. D.J. Lloyd: Int. Mater. Rev., 1994, vol. 39, pp. 1–23.10.1179/imr.1994.39.1.1 ↗
33. Y. Yashpal, A. Sumankant, C.S. Jawalkar, A.S. Verma, and N.M. Suri: Mater. Today., 2017, vol. 4, pp. 2927–36.
34. S. Sardar, S.K. Karmakar, and D. Das: Mater. Today., 2017, vol. 4, pp. 3280–9.
35. I.G. Watson, M.F. Forster, P.D. Lee, R.J. Dashwood, R.W. Hamilton, and A. Chirazi: Composite A., 2005, vol. 36, pp. 1177–87.10.1016/j.compositesa.2005.02.003 ↗
36. Y. Han, K. Li, J. Wang, D. Shu, and B. Sun: Mater. Sci. Eng. A., 2005, vol. 405, pp. 306–12.10.1016/j.msea.2005.06.024 ↗
37. Y. Han, D. Shu, J. Wang, and B. Sun: Mater. Sci. Eng. A., 2006, vol. 430, pp. 326–31.10.1016/j.msea.2006.05.105 ↗
38. Y. Jia, D. Wang, Y. Fu, A. Dong, G. Zhu, D. Shu, and B. Sun: Metall. Mater. Trans. A., 2019, vol. 50, pp. 1795–804.10.1007/s11661-019-05144-w ↗
39. E.J. Asbjornsson: PhD thesis, University of Nottingham, 2001.
40. J. Xu, R. Li, and Q. Li: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 1077–94.10.1007/s11661-020-06123-2 ↗
41. T.E. Quested and A.L. Greer: Acta Mater., 2004, vol. 52, pp. 3859–68.10.1016/j.actamat.2004.04.035 ↗
42. Z. Fan, H. Men, Y. Wang, and Z. Que: Metals., 2021, vol. 11, p. 478.10.3390/met11030478 ↗
43. Z. Fan, Y. Wang, Y. Zhang, T. Qin, X.R. Zhou, G.E. Thompson, T. Pennycook, and T. Hashimoto: Acta Mater., 2015, vol. 84, pp. 292–304.10.1016/j.actamat.2014.10.055 ↗
44. W. Yang, L. Liu, J. Zhang, S. Ji, and Z. Fan: Mater. Lett., 2015, vol. 160, pp. 263–7.10.1016/j.matlet.2015.07.147 ↗
45. S. Wang, Y. Wang, Q. Ramasse, and Z. Fan: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 2957–74.10.1007/s11661-020-05740-1 ↗
46. J.A. Spittle and S.B. Sadli: Mater. Sci. Technol., 1995, vol. 11, pp. 533–7.10.1179/mst.1995.11.6.533 ↗
47. Z. Fan, F. Gao, Y. Wang, and L. Zhou: Effect of solutes on grain refinement. Progr. Mater. Sci., 2021, vol. 123, p. 100809.10.1016/j.pmatsci.2021.100809 ↗
48. R. Willnecker, D.M. Herlach, and B. Feuerbacher: Appl. Phys. Lett., 1990, vol. 56, pp. 324–6.10.1063/1.103289 ↗
49. D.G. McCartney: Inter. Mater. Rev., 1989, vol. 34, pp. 247–60.10.1179/imr.1989.34.1.247 ↗
50. L. Sturz, A. Drevermann, C. Pickmann, and G. Zimmermann: Mater. Sci. Eng. A., 2005, vol. 413, pp. 379–83.10.1016/j.msea.2005.08.199 ↗
51. H. Men and Z. Fan: Acta Mater., 2011, vol. 59, pp. 2704–12.10.1016/j.actamat.2011.01.008 ↗
52. Z. Fan, F. Gao, L. Zhou, and S.Z. Lu: Acta Mater., 2018, vol. 152, pp. 248–57.10.1016/j.actamat.2018.04.045 ↗
53. B. Cantor and M.J. Goringe: Solidification and casting, The Institute of Physics, London, 2003.10.1887/0750308435 ↗
54. Z. Fan, Y. Wang, Z.F. Zhang, M. Xia, H.T. Li, J. Xu, L. Granasy, and G.M. Scamans: Inter. J. Cast Metals Res., 2009, vol. 22, pp. 318–22.10.1179/136404609X367452 ↗
55. Z. Fan, M. Xia, H. Zhang, G. Liu, J.B. Patel, Z. Bian, I. Bayandorian, Y. Wang, H.T. Li, and G.M. Scamans: Inter. J. Cast Metals Res., 2009, vol. 22, pp. 103–7.10.1179/136404609X367443 ↗
56. J.B. Patel, X. Yang, C.L. Mendis, and Z. Fan: JOM., 2017, vol. 69, pp. 1071–6.10.1007/s11837-017-2335-5 ↗
57. G.I. Eskin: Ultrasonic Treatment of Light Alloy Melts, Gordon & Breach, Amsterdam, 1998.10.1201/9781498701792 ↗
58. G.I. Eskin and D.G. Eskin: Ultrasonic Treatment of Light Alloy Melts, 2nd ed. CRC Press, Boca Raton, 2014.10.1201/b17270 ↗
59. Z. Fan, Y. Wang, M. Xia, and S. Arumuganathar: Acta Mater., 2009, vol. 57, pp. 4891–901.10.1016/j.actamat.2009.06.052 ↗
60. H. Men, B. Jiang, and Z. Fan: Acta Mater., 2010, vol. 58, pp. 6526–34.10.1016/j.actamat.2010.08.016 ↗
61. H.T. Li, M. Xia, P. Jarry, G.M. Scamans, and Z. Fan: J. Crystal Growth., 2011, vol. 314, pp. 285–92.10.1016/j.jcrysgro.2010.10.168 ↗
62. S. Kumar, N.H. Babu, G.M. Scamans, and Z. Fan: Metall. Mater. Trans. A., 2011, vol. 42, pp. 3141–9.10.1007/s11661-011-0722-z ↗
63. H.T. Li, Y. Wang, and Z. Fan: Acta Mater., 2012, vol. 60, pp. 1528–37.10.1016/j.actamat.2011.11.044 ↗
64. S. Das, N.S. Barekar, O. El Fakir, L. Wang, A.K.P. Rao, J.B. Patel, H.R. Kotadia, A. Bhagurkar, J.P. Dear, and Z. Fan: Mater. Sci. Eng. A., 2015, vol. 620, pp. 223–32.10.1016/j.msea.2014.10.019 ↗
65. N.S. Barekar, S. Das, X. Yang, Y. Huang, O. El Fakir, A.G. Bhagurkar, L. Zhou, and Z. Fan: Mater. Sci. Eng. A., 2016, vol. 650, pp. 365–73.10.1016/j.msea.2015.10.079 ↗