journal article·2021-11Open access

Microstructural Evolution Study of Fe–Mn–Al–C Steels Through Variable Thermomechanical Treatments

J. F. Durán, G. A. Pérez, J. S. Rodríguez, Y. Aguilar, R. E. Logé, O. A. Zambrano

Abstract

The microstructural evolution of the two austenitic alloys Fe–20Mn–3Al–0.7C wt pct and Fe–20Mn–6Al–0.7C wt pct when different thermal and thermomechanical treatments are performed has been studied. To this end, a generic industrial die of 100 ton capacity and a Gleeble 3800 simulator were selected to perform the thermomechanical treatments. A solubilization treatment was carried out at 1100 °C for 4 days for the two alloys in as cast state. In addition, the specimens deformed with the industrial die underwent a solubilization treatment at 1100 °C for 4 hours. Microstructural characterizations were performed by X-ray diffraction, transmission Mossbauer spectrometry, and electron backscatter diffraction. The results showed both the formation of different austenites rich and poor in solute atoms, as well as different microstructures, as a function of the treatments performed, which affected the resulting dynamically recrystallized microstructures. Notably, it was observed that it is possible to explain and relate the evolution of the microstructure to the hyperfine parameters resulting from fitting the Mossbauer spectra. In particular, the relationship between the degree of dynamic recrystallization and the evolution of an ordered austenitic structure is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. G. Frommeyer, E.J. Drewes, and B. Engl: Revue Métall.., 2000, vol. 97, pp. 1245–53. https://doi.org/10.1051/metal:2000110.10.1051/metal:2000110 ↗
2. G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43, pp. 438–46. https://doi.org/10.2355/isijinternational.43.438.10.2355/isijinternational.43.438 ↗
3. D. Hao, D. Hua, C.L. Qiu, Z.Y. Tang, J.M. Zeng, and Y. Ping: J. Iron Steel Res. Int., 2011, vol. 18, pp. 36–40. https://doi.org/10.1016/S1006-706X(11)60008-3.10.1016/S1006-706X(11)60008-3 ↗
4. B.C. De Cooman, Y. Estrin, and S.K. Kim: Acta Mater., 2018, vol. 142, pp. 283–362. https://doi.org/10.1016/j.actamat.2017.06.046.10.1016/j.actamat.2017.06.046 ↗
5. W. Song, T. Ingendahl, and W. Bleck: Acta Metall.Sin. (Engl Lett.)., 2014, vol. 27, pp. 546–56. https://doi.org/10.1007/s40195-014-0084-9.10.1007/s40195-014-0084-9 ↗
6. S. Chen, R. Rana, A. Haldar, and R.K. Ray: Prog. Mater Sci., 2017, vol. 89, pp. 345–91. https://doi.org/10.1016/j.pmatsci.2017.05.002.10.1016/j.pmatsci.2017.05.002 ↗
7. S.L. Wong, M. Madivala, U. Prahl, F. Roters, and D. Raabe: Acta Mater., 2016, vol. 118, pp. 140–51. https://doi.org/10.1016/j.actamat.2016.07.032.10.1016/j.actamat.2016.07.032 ↗
8. F. Abu-Farha, X. Hu, X. Sun, Y. Ren, L.G. Hector, G. Thomas, and T.W. Brown: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 2583–96. https://doi.org/10.1007/s11661-018-4660-x.10.1007/s11661-018-4660-x ↗
9. K. Sato, M. Ichinose, Y. Hirotsu, and Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868–77. https://doi.org/10.2355/isijinternational.29.868.10.2355/isijinternational.29.868 ↗
10. O. Grässel, G. Frommeyer, C. Derder, and H. Hofmann: J. Phys. IV JP., 1997, vol. 7, pp. 1–6. https://doi.org/10.1051/jp4:1997560.10.1051/jp4:1997560 ↗
11. H. Kim, D.W. Suh, and N.J. Kim: Sci. Technol. Adv. Mater., 2013, vol. 14, pp. 1–12. https://doi.org/10.1088/1468-6996/14/1/014205.10.1088/1468-6996/14/1/014205 ↗
12. O.A. Zambrano: J. Mater. Sci., 2018, vol. 53, pp. 14003–62. https://doi.org/10.1007/s10853-018-2551-6.10.1007/s10853-018-2551-6 ↗
13. O.A. Zambrano: J. Eng. Mater. Technoll.Trans. ASME., 2016, vol. 138, pp. 1–10. https://doi.org/10.1115/1.4033632.10.1115/1.4033632 ↗
14. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2012, vol. 60, pp. 5791–802. https://doi.org/10.1016/j.actamat.2012.07.018.10.1016/j.actamat.2012.07.018 ↗
15. J.D. Yoo and K.T. Park: Mater. Sci. Eng. A., 2008, vol. 496, pp. 417–24. https://doi.org/10.1016/j.msea.2008.05.042.10.1016/j.msea.2008.05.042 ↗
16. E. Welsch, D. Ponge, S.M. Hafez Haghighat, S. Sandlöbes, P. Choi, M. Herbig, S. Zaefferer, and D. Raabe: Acta Mater., 2016, vol. 116, pp. 188–99. https://doi.org/10.1016/j.actamat.2016.06.037.10.1016/j.actamat.2016.06.037 ↗
17. A. Saeed-Akbari, J. Imlau, U. Prahl, and W. Bleck: Metall. Mater. Trans. A., 2009, vol. 40A, pp. 3076–90. https://doi.org/10.1007/s11661-009-0050-8.10.1007/s11661-009-0050-8 ↗
18. Y. Lee and C. Choi: Metall. Mater. Trans. A., 2000, vol. 31A, pp. 355–60. https://doi.org/10.1007/s11661-000-0271-3.10.1007/s11661-000-0271-3 ↗
19. J. Zhang, D. Raabe, and C.C. Tasan: Acta Mater., 2017, vol. 141, pp. 374–87. https://doi.org/10.1016/j.actamat.2017.09.026.10.1016/j.actamat.2017.09.026 ↗
20. M. Eskandari, M.A. Mohtadi-Bonab, A. Zarei-Hanzaki, and S.M. Fatemi: J. Mater. Eng. Perform., 2018, vol. 27, pp. 1555–69. https://doi.org/10.1007/s11665-018-3273-2.10.1007/s11665-018-3273-2 ↗
21. B.B. He, B.M. Huang, S.H. He, Y. Qi, H.W. Yen, and M.X. Huang: Mater. Sci. Eng. A., 2018, vol. 724, pp. 11–6. https://doi.org/10.1016/j.msea.2018.03.065.10.1016/j.msea.2018.03.065 ↗
22. M. Klimova, S. Zherebtsov, N. Stepanov, G. Salishchev, C. Haase, and D.A. Molodov: Mater. Charact., 2017, vol. 132, pp. 20–30. https://doi.org/10.1016/j.matchar.2017.07.043.10.1016/j.matchar.2017.07.043 ↗
23. W. Wu, Y.W. Wang, P. Makrygiannis, F. Zhu, G.A. Thomas, L.G. Hector, X. Hu, X. Sun, and Y. Ren: Mater. Sci. Eng. A., 2018, vol. 711, pp. 611–23. https://doi.org/10.1016/j.msea.2017.11.008.10.1016/j.msea.2017.11.008 ↗
24. O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409. https://doi.org/10.1016/S0749-6419(00)00015-2.10.1016/S0749-6419(00)00015-2 ↗
25. D. Li, Y. Feng, Z. Yin, F. Shangguan, K. Wang, Q. Liu, and F. Hu: Mater. Des., 2012, vol. 34, pp. 713–8. https://doi.org/10.1016/j.matdes.2011.05.031.10.1016/j.matdes.2011.05.031 ↗
26. Y.F. Shen, Y.D. Wang, X.P. Liu, X. Sun, R. Lin Peng, S.Y. Zhang, L. Zuo, and P.K. Liaw: Acta Mater., 2013, vol. 61, pp. 6093–106. https://doi.org/10.1016/j.actamat.2013.06.051.10.1016/j.actamat.2013.06.051 ↗
27. O.A. Zambrano, J. Valdés, Y. Aguilar, J.J. Coronado, S.A. Rodriguez, and R.E. Logé: Mater. Sci. Eng. A., 2017, vol. 689, pp. 269–85. https://doi.org/10.1016/j.msea.2017.02.060.10.1016/j.msea.2017.02.060 ↗
28. O.A. Zambrano and R.E. Logé: Mater. Charact., 2019, vol. 152, pp. 151–61. https://doi.org/10.1016/j.matchar.2019.04.016.10.1016/j.matchar.2019.04.016 ↗
29. W.-C. Cheng, C.-Y. Cheng, C.-W. Hsu, and D.E. Laughlin: Mater. Sci. Eng. A., 2015, vol. 642, pp. 128–35. https://doi.org/10.1016/j.msea.2015.06.096.10.1016/j.msea.2015.06.096 ↗
30. G.M. Barona Osorio, G.A. Pérez, J. Ramos, J.F. Durán, P.C. Astudillo, A.F. Soriano, and H. Sánchez Sthepa: Hyperfine Interact., 2017, vol. 238, p. 56. https://doi.org/10.1007/s10751-017-1422-x.10.1007/s10751-017-1422-x ↗
31. K. Sato, K. Tagawa, and Y. Inoue: Mater. Sci. Eng. A., 1989, vol. 111, pp. 45–50. https://doi.org/10.1016/0921-5093(89)90196-2.10.1016/0921-5093(89)90196-2 ↗
32. G.D. Tsay, Y.H. Tuan, C.L. Lin, C.G. Chao, and T.F. Liu: Mater. Trans., 2011, vol. 52, pp. 521–5. https://doi.org/10.2320/matertrans.M2010255.10.2320/matertrans.M2010255 ↗
33. L.N. Bartlett, D.C. Van Aken, J. Medvedeva, D. Isheim, N.I. Medvedeva, and K. Song: Metall. Mater. Trans. A., 2014, vol. 45A, pp. 2421–35. https://doi.org/10.1007/s11661-014-2187-3.10.1007/s11661-014-2187-3 ↗
34. V.H.C. de Albuquerque, E. de Macedo Silva, J. Pereira Leite, E.P. de Moura, V.L. de Araújo Freitas, and J.M.R.S. Tavares: Mater. Design., 2010, vol. 31, pp. 2147–50. https://doi.org/10.1016/j.matdes.2009.11.010.10.1016/j.matdes.2009.11.010 ↗
35. E. Murad: Handbook of Clay Science, vol. 5, 2013, pp. 11–24. https://doi.org/10.1016/B978-0-08-098259-5.00003-2.10.1016/B978-0-08-098259-5.00003-2 ↗
36. C. Paduani, E. Da Silva, and G.A. Pérez-Alcázar: Hyperfine Interact., 1992, vol. 73, pp. 233–45. https://doi.org/10.1007/BF02418598.10.1007/BF02418598 ↗
37. J. Ramos, J.F. Piamba, H. Sánchez, and G.A. Pérez: Hyperfine Interact., 2015, vol. 232, pp. 119–26. https://doi.org/10.1007/s10751-015-1127-y.10.1007/s10751-015-1127-y ↗
38. O.A. Zambrano, J. Valdés, L.A. Rodriguez, D. Reyes, E. Snoeck, S.A. Rodríguez, and J.J. Coronado: Tribol. Int., 2019, vol. 135, pp. 421–31. https://doi.org/10.1016/j.triboint.2019.03.002.10.1016/j.triboint.2019.03.002 ↗
39. F. Varret and J. Teillet: Université du Maine (France).
40. B.H. Toby: J. Appl. Crystallogr., 2001, vol. 34, pp. 210–3. https://doi.org/10.1107/S0021889801002242.10.1107/S0021889801002242 ↗
41. ASTM: E92-17: Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials, Annual Book of ASTM Standards, 2017.
42. O.A. Zambrano, J. Valdés, Y. Aguilar, J.J. Coronado, S.A. Rodríguez, and R.E. Logé: Mater. Sci. Eng. A., 2017, vol. 689, pp. 269–85. .10.1016/j.msea.2017.02.060 ↗
43. O.A. Zambrano, G. Tressia, and R.M. Souza: Eng. Fail. Anal., 2020, vol. 115, 104621. https://doi.org/10.1016/j.engfailanal.2020.104621.10.1016/j.engfailanal.2020.104621 ↗
44. Y. Ishikawa and Y. Endoh: J. Phys. Soc. Jpn., 1967, vol. 23, pp. 205–13. https://doi.org/10.1143/JPSJ.23.205.10.1143/JPSJ.23.205 ↗
45. G.A. Pérez Alcázar, E.G. Da Silva, and C. Paduani: Hyperfine Interact., 1991, vol. 66, pp. 221–9. https://doi.org/10.1007/BF02395869.10.1007/BF02395869 ↗
46. B.K. Vainshtein, V.M. Fridkin, V.L. Indenbom, and P. Paufler: Modern Crystallography 2, vol. 2, 3rd edn., 2000, pp. 1–122.10.1007/978-3-642-57254-8_1 ↗
47. Y. Sutou, N. Kamiya, R. Umino, L. Ohnuma, and K. Ishida: ISIJ Int., 2010, vol. 50, pp. 893–9. https://doi.org/10.2355/isijinternational.50.893.10.2355/isijinternational.50.893 ↗
48. O.A. Zambrano, Y. Aguilar, J. Valdés, S.A. Rodríguez, and J.J. Coronado: Wear., 2016, vol. 348–349, pp. 61–8. https://doi.org/10.1016/j.wear.2015.11.019.10.1016/j.wear.2015.11.019 ↗