journal article·2021-01

β-Texture Evolution of a Near-β Titanium Alloy During Cooling After Forging in the β Single-Phase and (α + β) Dual-Phase Regions

L. Meng, T. Kitashima, T. Tsuchiyama, M. Watanabe

Publisher page

Abstract

β-Texture evolution during cooling after forging in the β single-phase region and (α + β) dual-phase region was investigated in Ti-6Al-2Sn-4Zr-6Mo alloy. Typical {001} and {111} β fiber textures of the β phase developed during forging. Dynamic-recrystallized β grains formed and inherited the orientation of their parent grains during forging in the β single-phase region. The {001} texture was enhanced with decreasing cooling rate after forging in the β region, that is, as cooling time in the β region increased. The results of the post-forging holding in the β region demonstrated that the recrystallized grains that grew in the β region consumed the adjacent {111}-oriented parent grains and initially enhanced the {001} texture. However, the enhancement of the {001} texture was moderated with increasing holding time because of the increased orientation deviation between the recrystallized grains and the parent grains. In addition, the {001} β texture was weakened by the growth of static-recrystallized grains after its incubation period during the holding time. These results indicate that growth of dynamic-recrystallized and static-recrystallized grains moderated the increase of the {001} texture intensity at low cooling rates of specimens forged in the β region. In specimens forged near the β-transus temperature and in the (α + β) dual-phase region, the {001} texture intensity was only slightly affected by the cooling rate. Recrystallization of the β phase was suppressed by the precipitation of the α phase during forging and cooling at low temperatures. A slow cooling rate of − 2 °C/s was determined by measuring the temperature change of a large specimen similar in size to those used in real-world applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. G. Lütjering, J.C. Williams: Titanium, 2nd ed., Springer-Verlag, Berlin, Heidelberg, 2007.
2. J.O. Peters, G. Lütjering, M. Koren, H. Puschnik, R.R. Boyer: Mater. Sci. Eng. A, 1996, vol. 213, pp. 71–80.10.1016/0921-5093(96)10225-2 ↗
3. C. Sauer, G. Luetjering: J. Mater. Process. Technol., 2001, vol. 117, pp. 311–317.10.1016/S0924-0136(01)00788-9 ↗
4. T. Ahmed, H.J. Rack: Mater. Sci. Eng. A, 1998, vol. 243, pp. 206-211.10.1016/S0921-5093(97)00802-2 ↗
5. K. Hua, J. Li, H. Kou, J. Fan, M. Sun, B. Tang: J. Alloys Compd., 2016, vol. 67, pp. 381–388.10.1016/j.jallcom.2016.02.102 ↗
6. W. Yu, M.Q. Li, J. Luo: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4210–4217.10.1016/j.msea.2010.03.024 ↗
7. S. Le Corre, R. Forestier, F. Brisset, M. Mathon, D. Solas: Proc. 13th World Conf. Titan., Wiley, Hoboken, NJ, 2016, pp. 757–64.10.1002/9781119296126.ch127 ↗
8. J.K. Fan, H.C. Kou, M.J. Lai, B. Tang, H. Chang, J.S. Li: Mater. Sci. Eng. A, 2013, vol. 584, pp. 121–132.10.1016/j.msea.2013.07.019 ↗
9. C. Wu, L. Huang, C.M. Li: Mater. Sci. Eng. A, 2010, vol. 773, 138851.10.1016/j.msea.2019.138851 ↗
10. Y. Wu, H. Kou, B. Tang, J. Li: Adv. Eng. Mater., 2018, vol. 20, 1700587.10.1002/adem.201700587 ↗
11. K. Li, P. Yang: Metals (Basel), 2017, vol. 7, pp. 1–8.
12. L. Meng, T. Kitashima, T. Tsuchiyama, M. Watanabe: Mater. Sci. Eng. A, 2020, vol. 771, 138640.10.1016/j.msea.2019.138640 ↗
13. T. Karthikeyan, A. Dasgupta, R. Khatirkar, S. Saroja, I. Samajdar, M. Vijayalakshmi: Mater. Sci. Eng. A, 2010, vol. 528, pp. 549-558.10.1016/j.msea.2010.09.055 ↗
14. Z.B. Zhao, Q.J. Wang, Q.M. Hu, J.R. Liu, B.B. Yu, R. Yang: Acta Mater., 2017, vol. 126, pp. 372-382.10.1016/j.actamat.2016.12.069 ↗
15. F.J. Gil, J.M. Manero, M.P. Ginebra, J.A. Planell: Mater. Sci. Eng. A, 2003, vol. 349, pp. 150-155.10.1016/S0921-5093(02)00784-0 ↗
16. G.C. Obasi, J.Q. da Fonseca, D. Rugg, M. Preuss: Mater. Sci. Eng. A, 2013, vol. 576, pp. 272-279.10.1016/j.msea.2013.04.018 ↗
17. X.G. Fan, H. Yang, P.F. Gao, R. Zuo, P.H. Lei: J. Mater. Process. Technol., 2016, vol. 234, pp. 290-299.10.1016/j.jmatprotec.2016.03.031 ↗
18. K. Wang, M. Wu, Z. Yan, D. Li, R. Xin, Q. Liu: J. Alloys Compd., 2018, vol. 752, pp. 14–22.10.1016/j.jallcom.2018.04.148 ↗
19. B. Sander, D. Raabe: Mater. Sci. Eng. A, 2008, vol. 479, pp. 236-247.10.1016/j.msea.2007.06.077 ↗
20. T. Kitashima, R. Matsumoto, Y. Yoshida, H. Matsumoto, T. Nishihara, S. Kuroda, N. Motohashi, M. Hagiwara, S. Emura: Mater. Perform. Charact., 2019, vol. 8, pp. 389-401.10.1520/MPC20190075 ↗
21. T. Furuhara, B. Poorganji, H. Abe, T. Maki: JOM, 2017, vol. 59(1), pp. 64–67.10.1007/s11837-007-0013-8 ↗
22. R. Ding, Z.X. Guo, A. Wilson: Mater. Sci. Eng. A, 2002, vol. 327, pp. 233–245.10.1016/S0921-5093(01)01531-3 ↗
23. M. Klimova, S. Zherebtsov, G. Salishchev, S.L. Semiatin: Mater. Sci. Eng. A, 2015, vol. 645, pp. 292–297.10.1016/j.msea.2015.08.008 ↗
24. Y.P. Li, E. Onodera, H. Matsumoto, A. Chiba: Metall. Mater. Trans. A, 2009, vol. 40, pp. 982–990.10.1007/s11661-009-9783-7 ↗
25. M. Sen, S. Suman, M. Kumar, T. Banerjee, A. Bhattacharjee, S.K. Kar: Mater. Charact., 2018, vol. 146, pp. 55-70.10.1016/j.matchar.2018.09.038 ↗
26. F. Chaussy, J.H. Driver: Rev. Metall. Cah. D’Informations Tech., 1996, vol. 93, pp. 1057–1066.
27. E. Bertrand, P. Castany, T. Gloriant: Scr. Mater., 2014, vol. 83, pp. 41–44.10.1016/j.scriptamat.2014.04.012 ↗
28. K.X. Wang, W.D. Zeng, Y.Q. Zhao, Y.T. Shao, Y.G. Zhou: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6193–6199.10.1016/j.msea.2010.06.059 ↗
29. H. Matsumoto, D. Naito, K. Miyoshi, K. Yamanaka, A. Chiba, Y. Yamabe-Mitarai: Sci. Technol. Adv. Mater., 2017, vol. 18, pp. 893–904.10.1080/14686996.2017.1386530 ↗
30. D. Qin, D. Guo, L. Zheng, Y. Li: J. Alloys Compd., 2018, vol. 769, pp. 725-731.10.1016/j.jallcom.2018.08.053 ↗
31. J. Zhao, J. Zhong, F. Yan, F. Chai, M. Dargusch: J. Alloys Compd., 2017, vol. 710, pp. 616–627.10.1016/j.jallcom.2017.03.219 ↗
32. S. Mandal, A.K. Bhaduri, V. Subramanya-Sarma: Metall. Mater. Trans. A, 2011, vol. 42, pp. 1062–1072.10.1007/s11661-010-0517-7 ↗
33. H. Beladi, P. Cizek, P.D. Hodgson: Scr. Mater., 2010, vol. 62, pp. 191-194.10.1016/j.scriptamat.2009.10.022 ↗
34. A. Dehghan-Manshadi, M.R. Barnett, P.D. Hodgson: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1371-1381.10.1007/s11661-008-9513-6 ↗
35. Q. Chao, P.D. Hodgson, H. Beladi: Mater. Sci. Eng. A, 2017, vol. 694, pp. 13-23.10.1016/j.msea.2017.03.082 ↗