journal article·2020-02

Characterization of Recrystallization and Second-Phase Particles in Solution-Treated Additively Manufactured Alloy 718

Achmad Ariaseta, Satoru Kobayashi, Masao Takeyama, Yuting Wang, Shinya Imano

Publisher page

Abstract

Recrystallization and second-phase particles were characterized in solution-treated additively manufactured (AM) alloy 718 to understand its unusual recrystallization behaviors with respect to alloy 718 manufactured by wrought process. Three types of solution treatment temperatures, 1255 K (subsolvus: SUB), 1333 K (supersolvus: SUP), and 1473 K (ultra supersolvus: USS) with various holding times were tested. The AM alloy showed much slower recrystallization kinetics in the SUB and SUP conditions and retarded grain growth in the USS condition with respect to the wrought alloy. Microchemical and microstructural analyses have revealed the existence of a few 10-nm-sized oxygen-containing particles, enriched in C, N, Ti, Nb, Mo, and O in the extreme case, enriched in Al and O in the opposite extreme case and in between them in many cases. Coarse carbide phases and δ-Ni3Nb phase precipitates were also observed in the tested conditions. The Al- and O-rich particles were found to show the highest stability against particle coarsening during the solution treatments among all the types of particles observed. The slow recrystallization kinetics in the AM alloy was assumed to be due to the existence of the oxygen-containing fine particles which may retard strain-induced boundary migration (SIBM) which is likely the main recrystallization mechanism in the AM alloy 718.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Qi H, Azer M (2009) Metall Mater Trans A 40: 2410-242210.1007/s11661-009-9949-3 ↗
2. J.R. Davis, ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys, ASM International, Materials Park, OH, 2000.
3. T. Otsuka, H. Wakabayashi, D. Igarashi, A. Ariaseta, S. Imano, Y. Wang, S. Kobayashi, M. Takeyama: Proc. 9th Int. Symp. Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, The Minerals, Metals and Materials Society, 2018, pp. 501–13.10.1007/978-3-319-89480-5_32 ↗
4. E.E. Brown, D.R Muzyka, in: C.T. Sims, N.S. Stoloff, W.C. Hagel (eds.), Superalloys II: High-temperature materials for aerospace and industrial power, A Wiley-Interscience Publication JOHN WILEY & SONS, New York, 1987, pp. 165-188.
5. R.C. Reed, The Superalloys: Fundamentals and Applications, Cambridge University Press, UK, 2006.10.1017/CBO9780511541285 ↗
6. [6] E. Chlebus, K. Gruber, B. Kuznicka, J. Kurzac, T. Kurzynowski, Mater. Sci. Eng. A, 2005, vol. 639, pp. 647–655.10.1016/j.msea.2015.05.035 ↗
7. W.M. Tucho, P. Cuvilliera, A. Sjolyst-Kverneland, V. Hansen, Mater Sci. Eng. A, 2017, vol. 689, pp. 220-232.10.1016/j.msea.2017.02.062 ↗
8. Y-L. Kuo, S. Horikawa, S. Kakehi, Scr. Mater., 2017, vol. 129, pp. 74-78.10.1016/j.scriptamat.2016.10.035 ↗
9. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, F. Medina, Acta Mater., 2012, vol. 60, pp. 2229–2239.10.1016/j.actamat.2011.12.032 ↗
10. L.L. Parimi, G.A. Ravi, D. Clark, M.M. Attallah, Mater. Charact., 2014, vol. 89, pp. 102–111.10.1016/j.matchar.2013.12.012 ↗
11. F. Liu, X. Liu, G. Yang, M. Song, J. Chen, W. Huang, Rare Metall., 2011, vol. 30, pp. 434-438.
12. R.K. Viswanadham, D.J. Rowcliffe, J. Gurland. Science of Hard Materials. Springer, New York 1983.10.1007/978-1-4684-4319-6 ↗
13. F.J. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena. 2nd ed, Elsevier, Amsterdam 2004.
14. X. Wei, W. Zheng, Z. Song, T. Lei, Q. Yong, Q. Xie: J. Wuhan Univ. Technol. Mat. Sci. 2014, 29, 379-83.10.1007/s11595-014-0925-4 ↗
15. W. Wang, S. Lartigue-Korinek, F. Brisset, A. L. Helbert, J. Bourgon, T. Baudin, J. Mater. Sci., 2015, vol. 50, pp. 2167-2177.10.1007/s10853-014-8780-4 ↗
16. K. Huang, K. Marthinsen, Q. Zhao, R.E. Logé, Prog. Mater. Sci., 2018, vol. 92, pp. 284-359.10.1016/j.pmatsci.2017.10.004 ↗
17. S. Kobayashi, S. Zaeferrer, A. Schneider, D. Raabe, G. Fommeyer, Intermetallics, 2005, vol. 13, pp. 1296-1303.10.1016/j.intermet.2004.10.016 ↗
18. S. Kobayashi, S. Zaeferrer, Intermetallics, 2006, vol. 14, pp. 1252-1256.10.1016/j.intermet.2005.11.034 ↗
19. S. Kobayashi, S. Zaeferrer, D. Raabe, Materials Science Forum, 2007, vol. 550, pp. 345-350.10.4028/www.scientific.net/MSF.550.345 ↗
20. P. A. Manohar, M. Ferry, T. Chandra, ISIJ Int., 1998, vol. 38, pp. 913-924.10.2355/isijinternational.38.913 ↗
21. T. Gladman, Proc. R. Soc. Lond. A, 1966, vol. 294, pp. 298-309.10.1098/rspa.1966.0208 ↗
22. E. Nes, N. Ryum, O. Hunderi, Acta Metall., 1985, vol. 33, pp. 11-22.10.1016/0001-6160(85)90214-7 ↗
23. N. Oono, S. Ukai, Mater. Trans., 2018, vol. 59, pp. 1651-1658.10.2320/matertrans.M2018110 ↗