journal article·2018-12Open access

Understanding the Effect of a Paint Bake Cycle on the Microstructure–Mechanical Properties Relationship of a Resistance Spot Welded Advanced High Strength Steel

P. Eftekharimilani, E. M. van der Aa, R. Petrov, M. J. M. Hermans, I. M. Richardson

Abstract

Abstract The effect of an automotive paint bake (PB) thermal cycle on the microstructural evolution and the mechanical properties of resistance spot welded advanced high strength steel is presented in this work. Mechanical behavior of the heat-treated welds reveals an increase in maximum cross-tension strength, displacement and subsequently energy absorption capability when 453 K (180 °C)-20 minutes a bake thermal cycle is applied after welding. The microstructures of resistance spot welds with and without a PB heat treatment were characterized using scanning and transmission electron microscopy (TEM). TEM analysis revealed that the weld nugget and HAZ of the resistance spot welds consist of a martensitic microstructure. The microstructural analysis of the post-weld heat-treated samples shows the presence of ε carbides in a martensitic matrix within the weld nugget and the HAZ. It is shown that the improved mechanical response of the paint-baked welds is associated with carbide precipitation during heat treatment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. [1] H.R. Rezaei Ashtiani, R. Zarandooz: Metall. Mater. Trans. A, 2015, vol. 46 (9), pp. 4095- 4105.10.1007/s11661-015-3030-1 ↗
2. [2] W. Tong, H. Tao, X. Jiang, N. Zhang, M. P. Marya, L. G. Hector, X. Q. Gayden: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2651- 2669.10.1007/s11661-005-0263-4 ↗
3. [3] N.D. Raath, D. Norman, I. Mcgregor, S. Hepple, R. Dashwood, D.J. Hughes: Metall. Mater. Trans. A, 2018, https://doi.org/10.1007/s11661-018-4502-x.10.1007/s11661-018-4502-x ↗
4. [4] M.D. Tumuluru: Weld. J., 2006, vol. 85, pp. 31- 37.
5. [5] M. Pouranvari, S.P.H. Marashi: Sci. Technol. Weld. Join., 2013, vol. 18(5), pp. 361– 403.10.1179/1362171813Y.0000000120 ↗
6. [6] C. Sawanishi, T. Ogura, K. Taniguchi: Sci. Technol. Weld. Join., 2014, vol. 19(1), pp. 52-59.10.1179/1362171813Y.0000000165 ↗
7. [7] P. Eftekharimilani, E.M. van der Aa, M.J.M. Hermans, I.M. Richardson: Sci. Technol. Weld. Join., 2017, vol. 22(7), pp. 545-554.10.1080/13621718.2016.1274848 ↗
8. [8] P. Eftekharimilani, E.M. van der Aa, M.J.M. Hermans, I.M. Richardson: Weld World. 2017, vol. 61(4), pp. 691-701.10.1007/s40194-017-0459-4 ↗
9. [9] T.B. Hilditch, J.G. Speer, D.K. Matlock: Materials and Design, 2007, vol. 28, pp. 2566–2576.10.1016/j.matdes.2006.10.019 ↗
10. E.M. Van der Aa, M. Amirthalingam, J. Winter, D.N. Hanlon, M.J.M. Hermans, M. Rijnders, I.M. Richardson: Mathematical Modelling of Welding Phonomena 11, Verlag der Technischen Universität Graz, 2015, pp. 175-193.
11. [11] A. Grajcar, M. Morawiec, M. Rozanski, S. Stano: Optics & Laser Technology, 2017, vol. 92, pp. 52–61.10.1016/j.optlastec.2017.01.011 ↗
12. [12] S. Stano, A. Grajcar, Z. Wilk, M. Rozanski, P. Matter, M. Morawiec: Arch. Metall. Mater., 2016, vol. 61(2), p. 731–740.10.1515/amm-2016-0125 ↗
13. A. Trautmann: Ph.D. Thesis, München, Techn. Univ., 2008.
14. [14] M. Morawiec, M. Rozanski, A. Grajcar, S. Stano: Archives of civil and mechanical engineering, 2017, vol. 17, pp. 145-153.10.1016/j.acme.2016.09.007 ↗
15. [15] S. Iqbal, M.M.S. Gualini, A. Rehman: Optics & Laser Technology, 2010, vol. 42, pp. 93-98.10.1016/j.optlastec.2009.05.009 ↗
16. [16] X. Xue, A. B. Pereira, J. Amorim, J. Liao: Metals, 2017, vol. 7 (292), pp. 1-18.10.3390/met7080292 ↗
17. [17] F. Nikoosohbat, Sh. Kheirandish, M. Goodarzi, M. Pouranvari: Materials and Technology, 2015, vol. 49 (1), pp. 133–138.
18. ASM Handbook. Heat Treating, vol. 4. ASM International. ISBN-13: 978-0-87170-379-8.
19. I.B. Timoknina, P.D. Hodgson, S.P. Ringer, R.K. Zheng, and E.V. Pereloma: in New Developments on Metallurgy and Applications of High Strength Steels Conference, Buenos Aires, Argentina, 26–28 May 2008.
20. [20] G.R. Speich, W.C. Leslie: Met. Trans. A. 1972, vol. 3(5), pp. 1043-1054.10.1007/BF02642436 ↗
21. S. Smith, T. Okada, N.J. den Uijl, T. van der Veldt, M. Uchihara, and K. Fukui: in International Automotive Body Congress (IABC), Vaals, The Netherlands, June 2009.
22. T. Okada, S. Smith, N.J. den Uijl, T. van der Veldt, M. Uchihara, and K. Fukui: in Proceedings of the 8th International Welding Symposium, Japan Welding Society. November 2008.
23. [23] M. Tumuluru: Weld. J., 2010, vol. 89, pp. 91s-100s.
24. VDA 239-100 Material Specification: Sheet Steel for Cold Forming, 5 May 2016.
25. SEP 1220-2: Testing and Documentation Guideline for the Joinability of Thin Sheet of Steel-Part 2: Resistance Spot Welding. VDEh Standard; 2007 (Technical Report 08).
26. CrysTbox diffract GUI2.19 by Miloslav Klinger.
27. G. Kraus: The Metallurgical Society of AIME, Ferrous Metallurgy Committee, Warrendale, PA, 1983, pp. 101–23.
28. [28] R.A. Grange, C.R. Hribal, L.F. Porter: Metall. Trans. A. 1977, vol. 8A, pp. 1775-1785.10.1007/BF02646882 ↗
29. [29] G. Krauss: Metall. Mater. Trans. A. 2001, vol. 32A, pp. 861-877.10.1007/s11661-001-0344-y ↗
30. S.H. Lalam: Proc. Great Des. Steels Semin., Livonia, MI, USA, March 2005, AISI. http://www.autosteel.org/Great%20Designs%20in%20Steel.aspx.
31. [31] F. HajyAkbary, J. Sietsma, G. Miyamoto, N. Kamikawa, R.H. Petrov, T. Furuhara, M.J. Santofimia: Mater. Sci. Eng. A, 2016, vol. 677, pp. 505-514.10.1016/j.msea.2016.09.087 ↗