The Influence of Al Content and Thickness on the Microstructure and Tensile Properties in High-Pressure Die Cast Magnesium Alloys
Source abstract
Abstract
The influence of Al content and section thickness on the microstructural features and tensile properties of high-pressure die cast AM series magnesium alloys is quantified in order to better understand the relationship between microstructure and tensile properties. It is found that with increasing aluminum content, the yield strength increases and the ductility decreases. Increasing the plate thickness results in a decrease in both the yield strength and ductility. The grain size, β-Mg17Al12 phase volume fraction, and solute content are all quantified through the thickness of the plates. It is found that the plates have a skin with increased hardness, due to a fine grain structure. The primary factors affecting strengthening in these alloys, including microstructural variations through the thickness, are accounted for using a linear superposition model. We conclude that yield strength is dominated by grain boundary strengthening and solid solution strengthening effects. The through-thickness grain size and solute concentration were quantified and these variations were found to play an important role in controlling the yield strength of these alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (83)
Show source-provided references
1. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
2. A.L. Bowles, Q. Han, and J.A. Horton: Essent. Readings Magnes. Technol., 2014, pp. 197–202.
3. A.A. Luo: J. Magnes. Alloy., 2013, vol. 1, pp. 2–22.10.1016/j.jma.2013.02.002 ↗
4. M.M. Avedesian and H. Baker, eds.: ASM Specialty Handbook—Magnesium and Magnesium Alloys, ASM International, Metals Park, OH, 1999.
5. K.V. Yang, M.A. Easton, and C.H. Cáceres: Adv. Eng. Mater., 2013, vol. 15, pp. 302–7.10.1002/adem.201200188 ↗
6. M .R. Barone and D. A. Caulk: Int. J. Eng. Sci., 2000, vol. 38, pp. 1279–1302.10.1016/S0020-7225(99)00082-8 ↗
7. J.H. Forsmark, J.W. Zindel, L. Godlewski, and A. Caliskan: SAE Int., 2012, pp. 2–10.
8. C. Dørum, O.S. Hopperstad, M. Langseth, O.-G. Lademo, and S. Sannes: SAE Tech. Pap. Ser., 2005, vol. 2005-01-07, p. 8.
9. J.P. Weiler, J.T. Wood, R.J. Klassen, E. Maire, R. Berkmortel, and G. Wang: Mater. Sci. Eng. A, 2005, vol. 395, pp. 315–22.10.1016/j.msea.2004.12.042 ↗
10. C.D. Lee: Mater. Sci. Eng. A, 2007, vol. 454–455, pp. 575–80.10.1016/j.msea.2006.11.064 ↗
11. K.S. Choi, D. Li, X. Sun, M. Li, and J.E. Allison: SAE Int., 2013, pp. 3–10.
12. J.E. Allison, D. Backman, and L. Christodoulou: J. Mater., 2006, vol. 58, pp. 25–27.10.1007/s11837-006-0223-5 ↗
13. S. Sannes, H. Gjestland, and H. Westengen: SAE Tech. Pap. Ser., 2005, vol. 2005-01-03, p. 7.
14. J.H. Forsmark, J.W. Zindel, L. Godlewski, J. Zheng, J.E. Allison, and M. Li: Integr. Mater. Manuf. Innov., 2015, vol. 4, pp. 1–38.10.1186/s40192-015-0033-0 ↗
15. U. Weiss and A. Bach: La Metall. Ital., 2011, vol. 11–12, pp. 31–39.
16. K.V. Yang, C.H. Cáceres, and M.A. Easton: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4117–28.10.1007/s11661-014-2326-x ↗
17. P. Sharifi, Y. Fan, K. Sadayappan, G. Birsan, and J.T. Wood: in Magnes. Technol. 2015, 2015, pp. 351–56.
18. I. Toda-Caraballo, E.I. Galindo-Nava, and P.E.J. Rivera-Díaz-del-Castillo: Acta Mater., 2014, vol. 75, pp. 287–96.10.1016/j.actamat.2014.04.064 ↗
19. C.H. Cáceres, W.J. Poole, A.L. Bowles, and C.J. Davidson: Mater. Sci. Eng. A, 2005, vol. 402, pp. 269–77.10.1016/j.msea.2005.04.024 ↗
20. D. Rodrigo, M. T. Murray, and H. Mao: SAE Int. Congr. Magnes. Sess., 1999.
21. T.K. Aune, H. Westengen, and T. Ruden: SAE Tech., 1993, pp. 51–57.
22. C.H. Cáceres and B.I. Selling: Mater. Sci. Eng. A, 1996, vol. 220, pp. 109–16.10.1016/S0921-5093(96)10433-0 ↗
23. T.D. Berman, T.M. Pollock, and J.W. Jones: Metall. Mater. Trans. A, 2015, vol. 46, pp. 2986–98.10.1007/s11661-015-2913-5 ↗
24. E.I. Barker, K.S. Choi, X. Sun, E. Deda, J. Allison, M. Li, J. Forsmark, J. Zindel, and L. Godlewski: Comput. Mater. Sci., 2014, vol. 92, pp. 353–61.10.1016/j.commatsci.2014.03.010 ↗
25. K.S. Choi, E.I. Barker, G. Cheng, X. Sun, J. Forsmark, and M. Li: SAE Int. J. Mater. Manuf., 2016, vol. 9, pp. 2016-01-0290.10.4271/2016-01-0290 ↗
26. K. Vanna Yang, M.A. Easton, and C.H. Cáceres: Mater. Sci. Eng. A, 2013, vol. 580, pp. 191–95.10.1016/j.msea.2013.05.017 ↗
27. T.D. Berman: University of Michigan, Ann Arbor, MI, unpublished research, 2016.
28. Materials Commons, https://materialscommons.org/mcpub/#/details/238117f2-6066-4a78-a6f0-e2afdf664625. Accessed 20 Aug 2016.
29. B. Puchala, G. Tarcea, E.A. Marquis, M. Hedstrom, H.V. Jagadish, and J.E. Allison: Jom, 2016, vol. 68, pp. 2035–44.10.1007/s11837-016-1998-7 ↗
30. L.-Y. Wei and R. Warren: Mater. Sci. Technol., 2007, vol. 23, pp. 745–52.10.1179/174328407X185820 ↗
31. V.Y. Gertsman, J. Li, S. Xu, J.P. Thomson, and M. Sahoo: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1989–97.10.1007/s11661-005-0319-5 ↗
32. J.H. Forsmark, Z. Dowling, K. Gibson, C. Mueller, L. Godlewski, J.W. Zindel, and J.M. Boileau: SAE Int. J. Mater. Manuf., 2015, vol. 8.10.4271/2015-01-0510 ↗
33. C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1833–44.10.1007/s11661-007-9243-1 ↗
34. N. Tahreen, D.L. Chen, M. Nouri, and D.Y. Li: J. Alloys Compd., 2015, vol. 623, pp. 15–23.10.1016/j.jallcom.2014.10.096 ↗
35. A.L. Bowles, K. Nogita, M.S. Dargusch, and C.J. Davidson: Mater. Trans, 2004, vol. 45, pp. 3114–19.10.2320/matertrans.45.3114 ↗
36. A.V. Nagasekhar, M.A. Easton, and C.H. Cáceres: Adv. Eng. Mater., 2009, vol. 11, pp. 912–19.10.1002/adem.200900175 ↗
37. H.I. Laukli: Norwegian University of Science and Technology, 2004.
38. H.I. Laukli, C.M. Gourlay, and A.K. Dahle: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2005, vol. 36, pp. 805–18.10.1007/s11661-005-1011-5 ↗
39. A.L. Bowles, J.R. Griffiths, and C.J. Davidson: in Magnes. Technol. 2001, 2001, pp. 161–68.
40. K. Vanna Yang, C.H. Cáceres, and M.A. Easton: Mater. Sci. Eng. A, 2013, vol. 580, pp. 355–61.10.1016/j.msea.2013.05.018 ↗
41. J.P. Weiler, J.T. Wood, R.J. Klassen, R. Berkmortel, and G. Wang: Mater. Sci. Eng. A, 2006, vol. 419, pp. 297–305.10.1016/j.msea.2006.01.034 ↗
42. H. Cao and M. Wessén: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 309–19.10.1007/s11661-004-0132-6 ↗
43. M.S. Dargusch, M. Nave, S.D. McDonald, and D.H. StJohn: J. Alloys Compd., 2010, vol. 492, pp. L64–68.10.1016/j.jallcom.2009.11.199 ↗
44. S. Barbagallo, H.I. Laukli, O. Lohne, and E. Cerri: J. Alloys Compd., 2004, vol. 378, pp. 226–32.10.1016/j.jallcom.2003.11.174 ↗
45. W.P. Sequeira, G.L. Dunlop, and M.T. Murray: in Proc. Third Int. Magnes. Conf., 1996, pp. 63–73.
46. D.J. Sakkinen: SAE Tech. Pap., 1994, pp. 558–69.
47. D. Mirković and R. Schmid-Fetzer: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2009, vol. 40, pp. 974–81.10.1007/s11661-009-9788-2 ↗
48. X.J. Wang, S.M. Zhu, M.A. Easton, M.A. Gibson, and G. Savage: Int. J. Cast Met. Res., 2014, vol. 27, pp. 161–66.10.1179/1743133613Y.0000000091 ↗
49. K. Sadayappan, W. Kasprzak, Z. Brown, L. Ouimet, and A.A. Luo: Mater. Sci. Forum, 2009, vol. 618–619, pp. 381–86.10.4028/www.scientific.net/MSF.618-619.381 ↗
50. M. Zhou, A. Yu, N. Li, H. Hu, and R. Bowers: in Magnes. Technol. 2006, 2006, pp. 121–27.
51. X. Li, S.M. Xiong, and Z. Guo: Mater. Sci. Eng. A, 2015, vol. 633, pp. 35–41.10.1016/j.msea.2015.02.078 ↗
52. S. Otarawanna, C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Mater. Charact., 2009, vol. 60, pp. 1432–41.10.1016/j.matchar.2009.06.016 ↗
53. S.G. Lee, G.R. Patel, and A.M Gokhale: Scr. Mater., 2005, vol. 52, pp. 1063–68.10.1016/j.scriptamat.2005.01.007 ↗
54. M.S. Dargusch, K. Pettersen, K. Nogita, M.D. Nave, and G.L. Dunlop: Mater. Trans., 2006, vol. 47, pp. 977–82.10.2320/matertrans.47.977 ↗
55. P. Bakke, K. Pettersen, and H. Westengen: in Magnes. Technol. 2003, 2003, pp. 171–76.
56. N. Tahreen, D.L. Chen, M. Nouri, and D.Y. Li: Mater. Sci. Eng. A, 2014, vol. 594, pp. 235–45.10.1016/j.msea.2013.11.078 ↗
57. G. Cheng, E.I. Barker, E.V. Stephens, K.S. Choi, and X. Sun: MRS Adv., 2016, pp. 1–12.10.1557/adv.2016.25 ↗
58. E. Aghion, N. Moscovitch, and A. Arnon: Mater. Sci. Eng. A, 2007, vol. 447, pp. 341–46.10.1016/j.msea.2006.10.065 ↗
59. W.P. Sequeira, G.L. Dunlop, and M.T. Murray: in Proc. 3 rd Magnes. Conf. 1996, pp. 63–73.
60. [60] D.G. Leo Prakash and D. Regener: J. Alloys Compd., 2008, vol. 464, pp. 133–37.10.1016/j.jallcom.2007.09.134 ↗
61. T.N. Baker: in Yield, Flow Fract. Polycrystals, 1982, pp. 235–73.
62. A.J. Ardell: Metall. Trans. A, 1985, vol. 16A, pp. 2131–65.10.1007/BF02670416 ↗
63. S. C. Weakley-Bollin, W. Donlon, W. Donlon, C. Wolverton, J. E. Allison, and J. W. Jones: Metall. Mater. Trans. A, 2004, vol. 35, pp. 2407–18.10.1007/s11661-006-0221-9 ↗
64. C.H. Cáceres, C.J. Davidson, J.R. Griffiths, and C.L. Newton: Mater. Sci. Eng. A, 2002, vol. 325, pp. 344–55.10.1016/S0921-5093(01)01467-8 ↗
65. T.N. Baker, ed.: Yield, Flow, and Fracture of Polycrystals, 1983.
66. P. Sharifi, Y. Fan, H.B. Anaraki, A. Banerjee, K. Sadayappan, and J.T. Wood: Metall. Mater. Trans. A, 2016, vol. 47, pp. 5159–5168.10.1007/s11661-016-3698-x ↗
67. J.A. Yasi, L.G. Hector, and D.R. Trinkle: Acta Mater., 2010, vol. 58, pp. 5704–13.10.1016/j.actamat.2010.06.045 ↗
68. R.L. Fleischer: in Strength. Met., D. Peckner, ed., 1964, pp. 93–140.
69. C. H. Caceres and P. Lukac: Philos. Mag., 2008, vol. 88, pp. 977–89.10.1080/14786430801968611 ↗
70. J. H. Shen, Y. L. Li, and Q. Wei: Mater. Sci. Eng. A, 2013, vol. 582, pp. 270–75.10.1016/j.msea.2013.06.025 ↗
71. C.H. Cáceres and D.M. Rovera: J. Light Met., 2001, vol. 1, pp. 151–56.10.1016/S1471-5317(01)00008-6 ↗
72. E.O. Hall: Proc. Phys. Soc. A, 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
73. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
74. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1339–49.10.1016/0001-6160(69)90151-5 ↗
75. W. B. Hutchinson and M. R. Barnett: Scr. Mater., 2010, vol. 63, pp. 737–40.10.1016/j.scriptamat.2010.05.047 ↗
76. K. Fukuda, Y. Koyanagi, M. Tsushida, H. Kitahara, T. Mayama, and S. Ando: in 9th Pacific Rim Int. Conf. Adv. Mater. Process., 2016, pp. 794–96.
77. J. Zhang and S.P. Joshi: J. Mech. Phys. Solids, 2012, vol. 60, pp. 945–72.10.1016/j.jmps.2012.01.005 ↗
78. F.E. Hauser, P.R. Landon, and J.E. Dorn: Trans. Am. Inst. Mining, Metall. Pet. Eng. Inc., 1956, vol. 206, pp. 589–93.10.1007/BF03377735 ↗
79. C.H. Cáceres, G.E. Mann, and J.R. Griffiths: Metall. Mater. Trans. A, 2011, vol. 42, pp. 1950–59.10.1007/s11661-010-0599-2 ↗
80. P. Sharifi, Y. Fan, J.P. Weiler, and J.T. Wood: J. Alloys Compd., 2014, vol. 605, pp. 237–43.10.1016/j.jallcom.2014.03.043 ↗
81. K.J. Kurzydlowski and J.J. Bucki: Acta Metall. Mater., 1993, vol. 41, pp. 3141–46.10.1016/0956-7151(93)90044-S ↗
82. K. Vanna Yang, C.H. Cáceres, A.V. Nagasekhar, and M.A. Easton: Mater. Sci. Eng. A, 2012, vol. 542, pp. 49–55.10.1016/j.msea.2012.02.029 ↗
83. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1351–56.10.1016/0001-6160(69)90152-7 ↗