Austenitic Nickel- and Manganese-Free Fe-15Cr-1Mo-0.4N-0.3C Steel: Tensile Behavior and Deformation-Induced Processes between 298 K and 503 K (25 °C and 230 °C)
Source abstract
Abstract
The high-temperature austenite phase of a high-interstitial Mn- and Ni-free stainless steel was stabilized at room temperature by the full dissolution of precipitates after solution annealing at 1523 K (1250 °C). The austenitic steel was subsequently tensile-tested in the temperature range of 298 K to 503 K (25 °C to 230 °C). Tensile elongation progressively enhanced at higher tensile test temperatures and reached 79 pct at 503 K (230 °C). The enhancement at higher temperatures of tensile ductility was attributed to the increased mechanical stability of austenite and the delayed formation of deformation-induced martensite. Microstructural examinations after tensile deformation at 433 K (160 °C) and 503 K (230 °C) revealed the presence of a high density of planar glide features, most noticeably deformation twins. Furthermore, the deformation twin to deformation-induced martensite transformation was observed at these temperatures. The results confirm that the high tensile ductility of conventional Fe-Cr-Ni and Fe-Cr-Ni-Mn austenitic stainless steels may be similarly reproduced in Ni- and Mn-free high-interstitial stainless steels solution annealed at sufficiently high temperatures. The tensile ductility of the alloy was found to deteriorate with decarburization and denitriding processes during heat treatment which contributed to the formation of martensite in an outermost rim of tensile specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. D. Peckner, I.M. Bernstein (1977) Handbook of Stainless Steels. McGraw-Hill, New York.
2. J. Beddoes, J. Gordon Parr (1999) Introduction to Stainless Steels. ASM International, Materials Park, Ohio.
3. D.T. Llewellyn: Mater. Sci. Technol., 1997, vol. 13, pp. 389–400.10.1179/mst.1997.13.5.389 ↗
4. H. Berns, N. Nabiran, L. Mujica: Steel Res. Int., 2013, vol. 84, pp. 119–128.10.1002/srin.201100332 ↗
5. M. Schymura, R. Stegemann, A. Fischer: Int. J. Fatigue, 2015, vol. 79, pp. 25–35.10.1016/j.ijfatigue.2015.04.014 ↗
6. C.W. Shao, F. Shi, X.W. Li: Metall. Mater. Trans. A, 2015, vol. 46, pp. 1610–1620.10.1007/s11661-015-2769-8 ↗
7. P. Behjati, A. Kermanpur, A. Najafizadeh: Mater. Sci. Eng. A, 2013, vol. 588, pp. 43–48.10.1016/j.msea.2013.08.053 ↗
8. J.W. Simmons: Mater. Sci. Eng. A, 1996, vol. 207, pp. 159–169.10.1016/0921-5093(95)09991-3 ↗
9. Q. Wang, Y. Ren, C. Yao, K. Yang, R.D.K. Misra: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5537–5545.10.1007/s11661-015-3160-5 ↗
10. J.-H. Shin, J.-W. Lee: Mater. Charact., 2014, vol. 91, pp. 19–25.10.1016/j.matchar.2014.01.025 ↗
11. P. Behjati, A. Kermanpur, A. Najafizadeh, H. Samaei Baghbadorani, L.P. Karjalainen, J.-G. Jung, Y.-K. Lee: Mater. Des., 2014, vol. 63, pp. 500–507.10.1016/j.matdes.2014.06.069 ↗
12. T.-H. Lee, E. Shin, C.-S. Oh, H.-Y. Ha, S.-J. Kim: Acta Mater., 2010, vol. 58, pp. 3173–3186.10.1016/j.actamat.2010.01.056 ↗
13. F. Shi, L. Wang, W. Cui, C. Liu: J. Iron Steel Res. Int., 2008, vol. 15, pp. 72–77.10.1016/S1006-706X(08)60270-8 ↗
14. Z.Z. Yuan, Q.X. Dai, X.N. Cheng, K.M. Chen, L. Pan, A.D. Wang: Mater. Charact., 2006, vol. 56, pp. 79–83.10.1016/j.matchar.2005.09.013 ↗
15. J. e. Wittig, M. Pozuelo, J. a. Jiménez, G. Frommeyer: Steel Res. Int., 2009, vol. 80, pp. 66–70.
16. R. Rahimi, B.C. De Cooman, H. Biermann, J. Mola: Mater. Sci. Eng. A, 2014, vol. 618, pp. 46–55.10.1016/j.msea.2014.09.001 ↗
17. H. Berns, B. Hussong, S. Riedner, F. Wischnowski: Steel Res. Int., 2010, vol. 81, pp. 245–251.10.1002/srin.200900137 ↗
18. M.L.G. Byrnes, M. Grujicic, W.S. Owen: Acta Metall., 1987, vol. 35, pp. 1853–1862.10.1016/0001-6160(87)90131-3 ↗
19. V.G. Gavriljuk, A.L. Sozinov, J. Foct, J.N. Petrov, Y.A. Polushkin: Acta Mater., 1998, vol. 46, pp. 1157–1163.10.1016/S1359-6454(97)00322-4 ↗
20. M.O. Speidel, R.M. Pedrazzoli: Mater. Perform., 1992, vol. 31, pp. 59–61.
21. Y.N. Turan, A. Koursaris: J. South. Afr. Inst. Min. Metall., 1993, vol. 94, pp. 97–104.
22. R.P. Reed: JOM, 1989, vol. 41, pp. 16–21.10.1007/BF03220991 ↗
23. S. Kibey, J.B. Liu, M.J. Curtis, D.D. Johnson, H. Sehitoglu: Acta Mater., 2006, vol. 54, pp. 2991–3001.10.1016/j.actamat.2006.02.048 ↗
24. B.X. Huang, X.D. Wang, L. Wang, Y.H. Rong: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 717–724.10.1007/s11661-007-9434-9 ↗
25. R.E. Stoltz, J.B. Vander Sande: Metall. Trans. A, 1980, vol. 11A, pp. 1033–1037.10.1007/BF02654717 ↗
26. L. Vitos, J.-O. Nilsson, B. Johansson: Acta Mater., 2006, vol. 54, pp. 3821–3826.10.1016/j.actamat.2006.04.013 ↗
27. L. Rémy, A. Pineau, B. Thomas: Mater. Sci. Eng., 1978, vol. 36, pp. 47–63.10.1016/0025-5416(78)90194-5 ↗
28. A. Kovalev, A. Jahn, A. Weiß, P.R. Scheller: Steel Res. Int., 2011, vol. 82, pp. 45–50.10.1002/srin.201000245 ↗
29. S. Martin, S. Wolf, U. Martin, L. Krüger, D. Rafaja: Metall. Mater. Trans. A, 2014, pp. 1–10.
30. R. Rahimi, C. Ullrich, V. Klemm, D. Rafaja, B.C. De Cooman, H. Biermann, J. Mola: Mater. Sci. Eng. A, 2016, vol. 649, pp. 301–312.10.1016/j.msea.2015.10.005 ↗
31. O. Grässel, L. Krüger, G. Frommeyer, L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–1409.10.1016/S0749-6419(00)00015-2 ↗
32. O. Bouaziz, H. Zurob, B. Chehab, J.D. Embury, S. Allain, M. Huang: Mater. Sci. Technol., 2011, vol. 27, pp. 707–709.10.1179/026708309X12535382371852 ↗
33. J. Kim, Y. Estrin, B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 4168–4182.10.1007/s11661-013-1771-2 ↗
34. B.C. De Cooman, O. Kwon, K.-G. Chin: Mater. Sci. Technol., 2012, vol. 28, pp. 513–527.10.1179/1743284711Y.0000000095 ↗
35. A.S. Hamada, L.P. Karjalainen, R.D.K. Misra, J. Talonen: Mater. Sci. Eng. A, 2013, vol. 559, pp. 336–344.10.1016/j.msea.2012.08.108 ↗
36. A.Y. Chen, H.H. Ruan, J. Wang, H.L. Chan, Q. Wang, Q. Li, J. Lu: Acta Mater., 2011, vol. 59, pp. 3697–3709.10.1016/j.actamat.2011.03.005 ↗
37. E. Nagy, V. Mertinger, F. Tranta, J. Sólyom: Mater. Sci. Eng. A, 2004, vol. 378, pp. 308–313.10.1016/j.msea.2003.11.074 ↗
38. H.C. Shin, T.K. Ha, Y.W. Chang: Scr. Mater., 2001, vol. 45, pp. 823–829.10.1016/S1359-6462(01)01101-0 ↗
39. T.-H. Lee, H.-Y. Ha, B. Hwang, S.-J. Kim, E. Shin, J.W. Lee: Microsc. Microanal., 2013, vol. 19, pp. 77–82.10.1017/S1431927613012385 ↗
40. J. Mola, M. Wendler, A. Weiß, B. Reichel, G. Wolf, B.C. De Cooman: Metall. Mater. Trans. A, 2015, vol. 4, pp. 1450–1454.10.1007/s11661-015-2782-y ↗
41. M. Martin, S. Weber, W. Theisen, T. Michler, J. Naumann: Int. J. Hydrog. Energy, 2013, vol. 38, pp. 5989–6001.10.1016/j.ijhydene.2013.02.127 ↗
42. M. Ojima, Y. Adachi, Y. Tomota, Y. Katada, Y. Kaneko, K. Kuroda, H. Saka: Steel Res. Int., 2009, vol. 80, pp. 477–481.
43. H. Berns, V. Gavriljuk, S. Riedner: High Interstitial Stainless Austenitic Steels. Springer Berlin Heidelberg, Berlin, Heidelberg, 2013.10.1007/978-3-642-33701-7 ↗
44. M. Wendler, M. Hauser, O. Fabrichnaya, L. Krüger, A. Weiß, J. Mola: Mater. Sci. Eng. A, 2015, vol. 645, pp. 28–39.10.1016/j.msea.2015.07.084 ↗
45. J. Mola, B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 946–967.10.1007/s11661-012-1420-1 ↗
46. R. Rahimi, H. Biermann, J. Mola, R. Ritzenhoff: in HNS 2014, 2014, pp. 182–190.
47. H. Berns, S.N. Bugajchuk, V.A. Duz, R. Ehrhardt, V.G. Gavriljuk, Y.N. Petrov, I.A. Yakubzov: Steel Res., 1994, vol. 65, pp. 444–450.10.1002/srin.199401191 ↗
48. H. Berns, V. Gavriljuk: J. Phys. IV JP, 1998, vol. 7, pp. c5-263-c5-266.
49. H. Berns, V.A. Duz, R. Ehrhardt, V.G. Gavriljuk, Y.N. Petrov, A.V. Tarasenko: Z. Fuer Met. Res. Adv. Tech., 1997, vol. 88, pp. 109–116.
50. M. Pozuelo, J.E. Wittig, J.A. Jiménez, G. Frommeyer: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1826–1834.10.1007/s11661-009-9863-8 ↗
51. A. Jahn, A. Kovalev, A. Weiß, S. Wolf, L. Krüger, P.R. Scheller: Steel Res. Int., 2011, vol. 82, pp. 39–44.10.1002/srin.201000228 ↗
52. A. Kovalev, A. Jahn, A. Weiß, S. Wolf, P.R. Scheller: Steel Res. Int., 2011, vol. 82, pp. 1101–1107.10.1002/srin.201100065 ↗
53. A. Kovalev, A. Jahn, A. Weiß, S. Wolf, P.R. Scheller: Steel Res. Int., 2012, vol. 83, pp. 576–583.10.1002/srin.201100267 ↗
54. M. Wendler, A. Weiß, L. Krüger, J. Mola, A. Franke, A. Kovalev, S. Wolf: Adv. Eng. Mater., 2013, vol. 15, pp. 558–565.10.1002/adem.201200318 ↗
55. T.S. Byun, N. Hashimoto, K. Farrell: Acta Mater., 2004, vol. 52, pp. 3889–3899.10.1016/j.actamat.2004.05.003 ↗
56. A.S. Hamada, L.P. Karjalainen, M.C. Somani: Mater. Sci. Eng. A, 2007, vol. 467, pp. 114–124.10.1016/j.msea.2007.02.074 ↗
57. S. Curtze, V.-T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–5141.10.1016/j.actamat.2010.05.049 ↗
58. David Preidel: Einfluss der Legierungselemente auf die Temperaturabhängigkeit der mechanischen Eigenschaften von mittels Quenching and Partitioning behandelten Edelstählen auf Basis von X45Cr13, Diploma Thesis, TU Bergakademie Freiberg, 2015.
59. I. Tamura: Met. Sci., 1982, vol. 16, pp. 245–253.10.1179/030634582790427316 ↗
60. Y. Sakuma, D.K. Matlock, G. Krauss: Metall. Trans. A, 1992, vol. 23, pp. 1233–1241.10.1007/BF02665054 ↗
61. W. Feng, Z. Wu, L. Wang, J.G. Speer: Steel Res. Int., 2013, vol. 84, pp. 246–252.10.1002/srin.201200129 ↗
62. A. Weiß, H. Gutte, J. Mola: Metall. Mater. Trans. A, 2015, vol. 47, pp. 112–122.
63. U.F. Kocks, H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
64. H. Gutte, A. Weiß, Spannungs- und verformungsinduzierte Martensitbildungen in metastabilen austenitischen CrNi-Stählen, Habilitation, (TU Bergakademie Freiberg, 2011).
65. J.R. Strife, M.J. Carr, G.S. Ansell: Metall. Trans. A, 1977, vol. 8, pp. 1471–1484.10.1007/BF02642861 ↗
66. Z. Nishiyama: Martensitic Transformation. Academic Press, 1978.
67. K. Spencer, M. Véron, K. Yu-Zhang, J.D. Embury: Mater. Sci. Technol., 2009, vol. 25, pp. 7–17.10.1179/174328408X293603 ↗
68. G.B. Olson, M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1915–1923.10.1007/BF02659824 ↗
69. S.I. Hong, C. Laird: Acta Metall. Mater., 1990, vol. 38, pp. 1581–1594.10.1016/0956-7151(90)90126-2 ↗
70. K.-T. Park, K.G. Jin, S.H. Han, S.W. Hwang, K. Choi, C.S. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3651–3661.10.1016/j.msea.2010.02.058 ↗
71. V. Gerold, H.P. Karnthaler: Acta Metall., 1989, vol. 37, pp. 2177–2183.10.1016/0001-6160(89)90143-0 ↗
72. D. Kuhlmann-Wilsdorf, H.G.F. Wilsdorf, J.A. Wert: Scr. Metall. Mater., 1994, vol. 31, pp. 729–734.10.1016/0956-716X(94)90218-6 ↗
73. W. Wang, W. Yan, K. Yang, Y. Shan, Z. Jiang: J. Mater. Eng. Perform., 2010, vol. 19, pp. 1214–1219.10.1007/s11665-010-9603-7 ↗
74. S.-J. Kim, T.-H. Lee, C.-S. Oh: Steel Res. Int., 2009, vol. 80, pp. 467–472.
75. T.-H. Lee, H.-Y. Ha, B. Hwang, S.-J. Kim, E. Shin: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4455–4459.10.1007/s11661-012-1423-y ↗
76. S. Allain, J.-P. Chateau, O. Bouaziz, S. Migot, N. Guelton: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 158–162.10.1016/j.msea.2004.01.059 ↗
77. V. Gavriljuk, Y. Petrov, B. Shanina: Scr. Mater., 2006, vol. 55, pp. 537–540.10.1016/j.scriptamat.2006.05.025 ↗
78. S. Lu, Q.-M. Hu, B. Johansson, L. Vitos: Acta Mater., 2011, vol. 59, pp. 5728–5734.10.1016/j.actamat.2011.05.049 ↗
79. D. Rafaja, C. Krbetschek, C. Ullrich, S. Martin: J. Appl. Crystallogr., 2014, vol. 47, pp. 936–947.10.1107/S1600576714007109 ↗
80. L. Remy: Acta Metall., 1977, vol. 25, pp. 173–179.10.1016/0001-6160(77)90120-1 ↗
81. R.M. Latanision, A.W. Ruff: Metall. Trans., 1971, vol. 2, pp. 505–509.10.1007/BF02663341 ↗
82. H. Barman, A.S. Hamada, T. Sahu, B. Mahato, J. Talonen, S.K. Shee, P. Sahu, D.A. Porter, L.P. Karjalainen: Metall. Mater. Trans. A, 2014, vol. 45, pp. 1937–1952.10.1007/s11661-013-2175-z ↗
83. S. Martin, O. Fabrichnaya, D. Rafaja: Mater. Lett., 2015, vol. 159, pp. 484–488.10.1016/j.matlet.2015.06.087 ↗
84. D. Goodchild, W. Roberts, D. Wilson: Acta Metall., 1970, vol. 18, pp. 1137–1145.10.1016/0001-6160(70)90104-5 ↗
85. H.-J. Kestenbach: Philos. Mag., 1977, vol. 36, pp. 1509–1515.10.1080/14786437708238531 ↗
86. I. Karaman, H. Sehitoglu, K. Gall, Y.I. Chumlyakov, H.J. Maier: Acta Mater., 2000, vol. 48, pp. 1345–1359.10.1016/S1359-6454(99)00383-3 ↗
87. D. Geissler, J. Freudenberger, A. Kauffmann, M. Krautz, H. Klauss, A. Voss, J. Eickemeyer, L. Schultz: Acta Mater., 2011, vol. 59, pp. 7711–7723.10.1016/j.actamat.2011.08.040 ↗
88. J.A. Venables: Philos. Mag., 1962, vol. 7, pp. 35–44.10.1080/14786436208201856 ↗
89. H. Schumann: Krist. Tech., 1975, vol. 10, pp. 401–411.10.1002/crat.19750100409 ↗
90. G.B. Olson, M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1905–1914.
91. A.J. Bogers, W.G. Burgers: Acta Metall., 1964, vol. 12, pp. 255–261.10.1016/0001-6160(64)90194-4 ↗
92. T.-H. Lee, H.-Y. Ha, J.-Y. Kang, J. Moon, C.-H. Lee, S.-J. Park: Acta Mater., 2013, vol. 61, pp. 7399–7410.10.1016/j.actamat.2013.08.046 ↗
93. X.-S. Yang, S. Sun, X.-L. Wu, E. Ma, T.-Y. Zhang: Sci. Rep., 2014, vol. 4, pp. 1–7.
94. T.-H. Lee, C.-S. Oh, S.-J. Kim, S. Takaki: Acta Mater., 2007, vol. 55, pp. 3649–3662.10.1016/j.actamat.2007.02.023 ↗
95. P. Yang, Q. Xie, L. Meng, H. Ding, Z. Tang: Scr. Mater., 2006, vol. 55, pp. 629–631.10.1016/j.scriptamat.2006.06.004 ↗
96. R. Ueji, Y. Takagi, N. Tsuchida, K. Shinagawa, Y. Tanaka, T. Mizuguchi: Mater. Sci. Eng. A, 2013, vol. 576, pp. 14–20.10.1016/j.msea.2013.03.071 ↗
97. I.V. Kireeva, Y.I. Chumlyakov: Mater. Sci. Eng. A, 2008, vol. 481–482, pp. 737–741.10.1016/j.msea.2006.12.204 ↗
98. K. Yan, D.G. Carr, M.D. Callaghan, K.-D. Liss, H. Li: Scr. Mater., 2010, vol. 62, pp. 246–249.10.1016/j.scriptamat.2009.11.008 ↗
99. A.A. Saleh, E.V. Pereloma, A.A. Gazder: Acta Mater., 2013, vol. 61, pp. 2671–2691.10.1016/j.actamat.2013.01.051 ↗
100. A.A. Saleh, E.V. Pereloma, B. Clausen, D.W. Brown, C.N. Tomé, A.A. Gazder: Mater. Sci. Eng. A, 2014, vol. 589, pp. 66–75.10.1016/j.msea.2013.09.073 ↗