journal article·2016-12

Formation and Growth Kinetics of Reverted Austenite During Tempering of a High Co-Ni Steel

Marina Gruber, Gerald Ressel, Francisca Méndez Martín, Sarah Ploberger, Stefan Marsoner, Reinhold Ebner

Publisher page

Abstract

It is well known that high Co-Ni steels exhibit excellent toughness. Since the good toughness in these steels is supposed to be related to thin layers of austenite between martensite crystals, this work presents an experimental study corroborated with diffusional calculations to characterize the evolution of reverted austenite. Atom probe measurements were conducted for analyzing the element distribution in austenite and martensite during tempering. These results were correlated with crystallographic information, which was obtained by using transmission electron microscopy investigations. Additionally, the experimental findings were compared with kinetic calculations with DICTRA™. The investigations reveal that reverted austenite formation during tempering is connected with a redistribution of Ni, Co, Cr, and Mo atoms. The austenite undergoes a Ni and Cr enrichment and a Co depletion, while in the neighboring martensite, a zone of Ni and Cr depletion and Co enrichment is formed. The changes in the chemical composition of austenite during tempering affect the stability of the austenite against phase transformation to martensite during plastic deformation and have thus decisive influence on the toughness of the material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. K. Cho, J. Choi, H. Kang, S. Kim, K. Lee, H. Yang, and H. Kwon: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7286–93.10.1016/j.msea.2010.07.069 ↗
2. P. M. Novotny and G. E. Maurer: Adv. Mater. Process., 2007, vol. 165, pp. 37–40.
3. G. Haidemenopoulos: PhD Thesis, Massachusetts Institute of Technology, 1988.
4. H.E. Lippard: PhD Thesis, Northwestern University, Evanston Illinois, 1999.
5. C.J. Kuehmann: PhD Thesis, Northwestern University, Evanston, Illinois, 1994.
6. R. Ayer and P. Machmeier: Metall. Trans. A, 1993, vol. 24A, pp. 1943–55.10.1007/BF02666329 ↗
7. K. Sato: PhD Thesis, University of California, Berkeley, 2002.
8. G. Haidemenopoulos, M. Grujicic, G. Olson and M. Cohen: J. Alloy. Compd., 1995, vol. 220, pp. 142–47.10.1016/0925-8388(94)06015-0 ↗
9. H.E. Leal: PhD Thesis, Massachusetts Institute of Technology, 1984.
10. M. Gruber, S. Ploberger, G. Ressel, M. Wiessner, M. Hausbauer, S. Marsoner and R. Ebner: Arch. Metall. Mater., 2015, vol. 60, pp. 2131–37.10.1515/amm-2015-0358 ↗
11. R. Ayer, and P. M. Machmeier: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2510–17.10.1007/BF02652345 ↗
12. C.H. Yoo, H.M. Lee, J.W. Chan, and J.W. Morris: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3466–72.10.1007/BF02595438 ↗
13. T. Waitz, T. Antretter, F. Fischer, and H. Karnthaler: Mater. Sci. Technol., 2008, vol. 24, pp. 934–40.10.1179/174328408X302620 ↗
14. H.K.D.H. Bhadeshia, and D.V. Edmonds: Met. Sci., 1983, vol. 17, pp. 411–19.10.1179/030634583790420600 ↗
15. V. Raghaven: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 237–42.10.1007/BF02664662 ↗
16. R.L. Klueh, P.J. Maziasz, and E.H. Lee: Mater. Sci. Eng. A, 1988, vol. 102, pp. 115–24.10.1016/0025-5416(88)90539-3 ↗
17. A. Young: The Rietveld Method, Oxford University Press, Oxford, 2002.
18. M.K. Miller, A. Cerezo, M.G. Hetherington and G.D.W. Smith: Atom Probe Field Ion Microscopy, Oxford University Press Inc., New York, 1996.10.1093/oso/9780198513872.001.0001 ↗
19. MOB2-TCS Alloy Mobility Database, DICTRA version 24, Foundation for Computational Thermodynamics Stockholm.
20. TCFE3-TCS Steels/Fe-alloys Database, Thermo-Calc version R, Foundation of Computational Thermodynamics Stockholm.
21. A. Einstein: Ann. Phys., 1905, vol. 17, pp. 549–60.10.1002/andp.19053220806 ↗
22. O.C. Hellman, J.A. Vandenbroucke, J. Rüsing, D. Isheim, and D.N. Seidman: Microsc. Microanal., 2000, vol. 6, pp. 437–44.10.1007/S100050010051 ↗
23. O. Dmitrieva, D. Ponge, G. Inden, J. Millan, P. Choi, J. Sietsma, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 364–74.10.1016/j.actamat.2010.09.042 ↗
24. M. Gruber, S. Ploberger, M. Wiessner, S. Marsoner, and R. Ebner: Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials, Whistler, 2015, pp. 115-22.
25. D. Raabe, S. Sandlöbes, J. Millan, D. Ponge, H. Assadi, M. Herbi, and P. Choi: Acta Mater., 2013, vol. 61, pp. 6132–52.10.1016/j.actamat.2013.06.055 ↗
26. R. Schnitzer, R. Radis, M. Nöhrer, M. Schober, R. Hochfellner, S. Zinner, E. Povoden-Karadeniz, E. Kozeschnik, and H. Leitner: Mater. Chem. Phys., 2010, vol. 122, pp. 138–45.10.1016/j.matchemphys.2010.02.058 ↗
27. L.T. Shiang, and C.M. Wayman: Metallography, 1988, vol. 21, pp. 425–51.10.1016/0026-0800(88)90005-5 ↗
28. X. Li, and Z. Yin: Mater. Lett., 1995, vol. 24, pp. 239–42.10.1016/0167-577X(95)00109-3 ↗
29. M. Farooque, H. Ayub, A.U. Haq, and A. Khan: J. Mater. Sci., 1998, vol. 33, pp. 2927–30.10.1023/A:1004346412079 ↗
30. J. Wang, and S. Van der Zwaag: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1527–39.10.1007/s11661-001-0240-5 ↗
31. C. Garcia-Mateo, F.G. Caballero, M.K. Miller, and J.A. Jimenez: J. Mater. Sci., 2012, vol. 47, pp. 1004–10.10.1007/s10853-011-5880-2 ↗
32. J. Speer, D.K. Matlock, B.C. De. Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.