Precipitation in Two Al-Mg-Ge Alloys
Source abstract
Abstract
Two Al-Mg-Ge alloys with compositions Al-0.87Mg-0.43Ge (at. pct) and Al-0.59Mg-0.71Ge (at. pct) were investigated and compared using high-resolution transmission electron microscopy, annular dark-field scanning transmission electron microscopy, and nano-beam electron diffraction. The alloys contained fine needle- and lath-shaped precipitates after aging at 473 K (200 °C) for 16 hours, which produced hardnesses similar to those measured in comparable Al-Mg-Si alloys. The β″ phase was not observed. Instead, hardness was achieved by β′-like and disordered precipitates in the Mg-rich alloy, and U1-like and disordered precipitates in the Ge-rich alloy. In all cases, the fine precipitates had structures containing an ordered near-hexagonal network of Ge atoms with a = b ≈ 0.4 nm, which could be visualized directly in annular dark-field mode. The network is very similar to the recently discovered Si network that relates all precipitate structures in the Al-Mg-Si alloys. The orientation of the precipitate unit cells and the Ge network relative to the Al matrix differed from what has been observed for β′ and U1 in the Al-Mg-Si system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper: Acta Mater., 1998, vol. 46, pp. 3893-3904.10.1016/S1359-6454(98)00059-7 ↗
2. D.J. Chakrabarti and D.E. Laughlin: Prog. Mater. Sci., 2004, vol. 49, pp. 389-410.10.1016/S0079-6425(03)00031-8 ↗
3. C.D. Marioara, S.J. Andersen, H.W. Zandbergen, and R. Holmestad: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 691-702.
4. C.D. Marioara, H. Nordmark, S.J. Andersen, and R. Holmestad: J. Mater. Sci., 2006, vol. 41, pp. 471-78.10.1007/s10853-005-2470-1 ↗
5. K. Matsuda, Y. Sakaguchi, Y. Miyata, Y. Uetani, T. Sato, A. Kamio, and S. Ikeno: J. Mater. Sci., 2000, vol. 35, pp. 179-89.10.1023/A:1004769305736 ↗
6. M.H. Jacobs: Philos. Mag., 1972, vol. 26, pp. 1-13.10.1080/14786437208221015 ↗
7. C.D. Marioara, S.J. Andersen, T.N. Stene, H. Hasting, J. Walmsley, A.T.J. van Helvoort, and R. Holmestad: Philos. Mag., 2007, vol. 87, pp. 3385-3413.10.1080/14786430701287377 ↗
8. C. Cayron, L. Sagalowicz, O. Beffort, and P.A. Buffat: Philos. Mag. A, 1999, vol. 79, pp. 2833-51.10.1080/01418619908212027 ↗
9. L. Arnberg and B. Aurivillius: Acta Chem. Scand. A, 1980, vol. 34, pp. 1-5.10.3891/acta.chem.scand.34a-0001 ↗
10. S.J. Andersen, C.D. Marioara, R. Vissers, A. Frøseth, and H.W. Zandbergen: Mater. Sci. Eng. A, 2007, vol. 444, pp. 157-69.10.1016/j.msea.2006.08.084 ↗
11. S.J. Andersen, C.D. Marioara, R. Vissers, and R. Holmestad: Aluminium Alloys 2008: Their Physical and Mechanical Properties, vol. 1, Wiley, Hoboken, NJ, 2008, pp. 828–34.
12. S.J. Andersen, C.D. Marioara, A. Frøseth, R. Vissers, and H.W. Zandbergen: Mater. Sci. Eng. A, 2005, vol. 390, pp. 127-38.10.1016/j.msea.2004.09.019 ↗
13. A. Lutts: Acta Metall., 1961, vol. 9, pp. 577-86.10.1016/0001-6160(61)90161-4 ↗
14. S. Ceresara and P. Fiorini: Mater. Sci. Eng., 1968, vol. 3, pp. 170-74.10.1016/0025-5416(68)90007-4 ↗
15. K. Matsuda, T. Munekata, and S. Ikeno: Mater. Sci. Forum, 2007, vol. 561-565, pp. 2049-52.10.4028/www.scientific.net/MSF.561-565.2049 ↗
16. K. Matsuda, S. Ikeno, and T. Munekata: Mater. Sci. Forum, 2006, vol. 519-21, pp. 221-25.10.4028/www.scientific.net/MSF.519-521.221 ↗
17. C. Cayron and P.A. Buffat: Acta Mater., 2000, vol. 48, pp. 2639-53.10.1016/S1359-6454(00)00057-4 ↗
18. R. Vissers, M.A. van Huis, J. Jansen, H.W. Zandbergen, C.D. Marioara, and S.J. Andersen: Acta Mater., 2007, vol. 55, pp. 3815-23.10.1016/j.actamat.2007.02.032 ↗
19. K. Matsuda, S. Tada, S. Ikeno, T. Sato, and A. Kamio: Scr. Metall. Mater., 1995, vol. 32, pp. 1175-80.10.1016/0956-716X(95)00121-B ↗