Effects of Melt Thermal-Rate Treatment on Fe-Containing Phases in Hypereutectic Al-Si Alloy
Source abstract
Abstract
In this paper, effects of melt thermal-rate treatment (MTRT) on Fe-containing phases in hypereutectic Al-Si alloy were investigated. Results show that MTRT can refine microstructures and improve castability, mechanical properties, wear characteristics, and corrosion resistance of Fe-containing Al-Si alloy. When Al-15Si-2.7Fe alloy is treated with MTRT by 1203 K (930 °C) melt: coarse primary Si and plate-like Fe-containing phase both can be refined to small blocky morphology, and the long needle-like Fe-containing phase disappears almost entirely; ultimate tensile strength and elongation are 195 MPa and 1.8 pct, and increase by 12.7 and 50 pct, respectively; and the wear loss and coefficient of friction decrease 7 to 17 and 24 to 30 pct, respectively, compared with that obtained with conventional casting technique. Corrosion resistance of the alloy treated with MTRT by 1203 K (930 °C) melt is the best, that is it has the lowest i corr value and the highest E corr value. Besides, effects of MTRT on Al-15Si-xFe (x = 0.2, 0.7, 1.7, 3.7, 4.7) alloys were also studied, MTRT can only refine microstructure and improve mechanical properties of Al-15Si alloy with 0.7 to 3.7 pct Fe content greatly in the present work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. J. Hirsch: Mater. Forum, 2004, vol. 28, pp. 15–23.
2. D.K Dwivedi: Mater. Des., 2006, vol. 27, pp. 610–16.10.1016/j.matdes.2004.11.029 ↗
3. S.S. Wu, X.L. Tu, Y. Fukuda, T. Kanno, and H. Nakae: Trans. Nonferrous Met. Soc. China, 2003, vol. 13, pp. 1285–89.
4. P.N. Crepeau: AFS Trans., 1995, vol. 103, pp. 361–66.
5. L.A. Narayanan, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1761–73.10.1007/BF02668540 ↗
6. L.F. Mondolfo: Aluminum alloys: structure and properties. London, Butterworth, 1976.
7. H. Ye: J. Mater. Eng. Perform., 2003, vol. 12, pp. 288–97.10.1361/105994903770343132 ↗
8. B. Yang, F. Wang, J.S. Zhang, B.Q. Xiong, and X.J. Duan: Scripta. Mater., 2001, vol. 45, pp. 509–15.10.1016/S1359-6462(01)01051-X ↗
9. A.K. Srivastava, V.C. Srivastava, A. Gloter, and S.N. Ojha: Acta. Mater., 2006, vol. 54, pp. 1741–48.10.1016/j.actamat.2005.11.039 ↗
10. M. Rajabi, A. Simchi, M. Vahidi, and P. Davami: J. Alloy. Compd., 2008, vol. 466, pp. 111–18.10.1016/j.jallcom.2007.11.078 ↗
11. H.J. Huang, Y.H. Cai, H.Cui, J.F. Huang, J.P. He, and J.S. Zhang: Mater. Sci. Eng. A, 2009, vol. 502, pp. 118–25.10.1016/j.msea.2008.10.005 ↗
12. R. Ahmad, and R.I. Marshall: Int. J. Cast Met. Res. 2003, vol. 15, pp. 497–504.10.1080/13640461.2003.11819535 ↗
13. Q.L. Wang, H.R. Geng, M. Zuo, F. Long, and X. Peng: Mater. Sci. Technol., 2013, vol. 29, pp. 1233–40.10.1179/1743284713Y.0000000267 ↗
14. Q.L. Wang, Z.W. Zhang, F. Long, B. Guo, and H.R Geng: Trans. Indian Inst. Met., 2013, vol. 66, pp. 257–64.10.1007/s12666-013-0257-7 ↗
15. ISO 17475:2005 (GB/T 24196-2009): Corrosion of Metals and Alloys. Electrochemical Test Methods. Guidelines for Conducting Potentiostatic and Potentiodynamic Polarization Measurements, Beijing, 2009.
16. J.A. Taylor: Procedia Mater. Sci., 2012, vol. 1, pp. 19–33.10.1016/j.mspro.2012.06.004 ↗
17. T.O. Mbuya, B.O. Odera, and S.P. Ng’ang’a: Int. J. Cast Met. Res., 2003, vol. 16, pp. 451–65.10.1080/13640461.2003.11819622 ↗
18. W. Khalifa, A.M. Samuel, F.H. Samuel, H.W. Doty and S. Valtierra: Int. J. Cast Met. Res., 2006, vol. 19, pp. 156–66.10.1179/136404606225023372 ↗
19. P. Zhao, H.R. Geng, X.F. Tian, H.W. Cui, H.X. Geng, and J.T. Liu: Chin. J. Nonferrous Met., 2002, vol. 12, pp. 241–44 [Chinese].
20. X.Z. Lin, F. Yin, and B.D. Sun: Cast. Technol., 1999, vol. 5, pp. 29–32 [Chinese].10.2753/CES1097-1475320429 ↗
21. P. Saravanan, M. Premkumar, A.K. Singh, R. Gopalan, and V. Chandrasekaran: J. Alloy. Compd., 2009, vol. 105, pp. 645–49.10.1016/j.jallcom.2009.01.129 ↗
22. G. Zhong, S.S. Wu, H.W. Jiang, and P. An: J. Alloy. Compd., 2010, vol. 492, pp. 482–87.10.1016/j.jallcom.2009.11.145 ↗
23. W. Khalifa, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 807–25.10.1007/s11661-003-1009-9 ↗
24. Y. Awano, and Y. Shimizu: AFS Trans., 1990, vol. 98, pp. 889–95.
25. A. Couture: AFS Trans., 1981, vol. 11, pp. 9–17.
26. M. Rajabi, M. Vahidi, A. Simchi, and P. Davami: Mater. Charact., 2009, vol. 60, pp. 1370–81.10.1016/j.matchar.2009.06.014 ↗