Resistance Spot Welding of Quenching and Partitioning (Q&P) Third-Generation Advanced High-Strength Steel: Process–Microstructure–Performance
Source abstract
Abstract
This paper investigates process–microstructure–performance relationships in Q&P980 third-generation advanced high-strength steel (AHSS) resistance spot welds. The hardening and softening phenomena during welding are discussed in terms of weldment microstructure. The fusion zone (FZ) microstructure was mainly lath martensite with an average hardness of 500 HV due to the high cooling rate resulting from resistance spot welding. No significant softening was observed in the sub-critical heat-affected zone which was related mainly to the presence of the low volume fraction of fresh martensite in the initial microstructure of the base metal. The factors controlling the tensile–shear peak load, failure energy, and failure mode transition of Q&P980 resistance spot welds are discussed. The assessment of the tensile–shear peak load of the welds failed in the IF mode verified that interfacial failure strength is governed by FZ hardness rather than FZ fracture toughness. In the case of pullout failure, two competing failure mechanisms were identified: (i) ductile cracking from the notch tip and (ii) through-thickness localized necking, with the former was found to be the dominant failure mechanism for the Q&P980 steel resistance spot welds. The high susceptibility of the Q&P980 resistance spot welds to interfacial mode was due to its low hardening ratio, lack of significant softening in the HAZ, and its propensity to shrinkage void formation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. M.Y. Demeri: Advanced High-Strength Steels: Science, Technology, and Applications, ASM International, Materials Park, 2013.10.31399/asm.tb.ahsssta.9781627082792 ↗
2. E. Billur: Hot Stamping of Ultra High-Strength Steels. From a Technological and Business Perspective, Springer, Cham, 2019.10.1007/978-3-319-98870-2 ↗
3. M. Tisza: Lect. Notes Mech. Eng., 2021, vol. 22, pp. 81–94.10.1007/978-981-15-9529-5_7 ↗
4. J.G. Speer, E. De Moor, K.O. Findley, D.K. Matlock, and B.C. De Cooman: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3591–3601.10.1007/s11661-011-0869-7 ↗
5. L. Wang and J.G. Speer: Metallogr. Microstruct. Anal., 2013, vol. 2, pp. 268–81.10.1007/s13632-013-0082-8 ↗
6. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
7. E.J. Seo, L. Cho, and B.C. De Cooman: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3797–3802.10.1007/s11661-016-3579-3 ↗
8. E. de Moor, S. Lacroix, A.J. Clarke, J. Penning, and J.G. Speer: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2586–95.10.1007/s11661-008-9609-z ↗
9. M. Pouranvari and S.P.H. Marashi: Sci. Technol. Weld. Join., 2013, vol. 18, pp. 361–403.10.1179/1362171813Y.0000000120 ↗
10. M. Pouranvari, H.R. Asgari, S.M. Mosavizadch, and P.H. Marashi: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 217–25.10.1179/174329307X164409 ↗
11. B. Wang, Q.Q. Duan, G. Yao, J.C. Pang, X.W. Li, L. Wang, and Z.F. Zhang: Int. J. Fatigue., 2014, vol. 66, pp. 20–28.10.1016/j.ijfatigue.2014.03.004 ↗
12. T. Chen, Z. Ling, M. Wang, and L. Kong: Mater. Sci. Eng. A, 2022, vol. 831, 142164.10.1016/j.msea.2021.142164 ↗
13. T. Chen, Z. Ling, M. Wang, and L. Kong: J. Mater. Process. Technol., 2020, vol. 285, 116797.10.1016/j.jmatprotec.2020.116797 ↗
14. B. Figueredo, D.C. Ramachandran, A. Macwan, and E. Biro: Weld. World., 2021, vol. 65, pp. 2359–69.10.1007/s40194-021-01179-z ↗
15. M.J. Santofimia, L. Zhao, R. Petrov, C. Kwakernaak, W.G. Sloof, and J. Sietsma: Acta Mater., 2011, vol. 59, pp. 6059–6068.10.1016/j.actamat.2011.06.014 ↗
16. B.C. De Cooman, J.G. Speer, and M. Trip: Steel Res. Int., 2006, vol. 77, pp. 634–40.10.1002/srin.200606441 ↗
17. F. HajyAkbary, J. Sietsma, G. Miyamoto, T. Furuhara, and M.J. Santofimia: Acta Mater., 2016, vol. 104, pp. 72–83.10.1016/j.actamat.2015.11.032 ↗
18. K.E. Easterling: Mathematical Modelling of Weld Phenomena, eds. H. Cerjak, K.E. Easterling, The Institute of Materials, London. 1993, pp. 183–200.
19. J.E. Gould, S.P. Khurana, and T. Li: Weld. J., 2006, vol. 85, pp. 111s–116s.
20. M. Pouranvari and S.P.H. Marashi: Mater. Sci. Technol., 2009, vol. 25, pp. 1411–16.10.1179/026708309X12459430509292 ↗
21. M. Pouranvari and S.P.H. Marashi: Ironmak. Steelmak., 2012, vol. 39, pp. 104–11.10.1179/1743281211Y.0000000066 ↗
22. M. Pouranvari, S.P.H. Marashi, and D.S. Safanama: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8344–52.10.1016/j.msea.2011.08.016 ↗
23. M. Pouranvari: Can. Metall. Q., 2012, vol. 51, pp. 67–74.10.1179/1879139511Y.0000000020 ↗
24. M.S. Khan, S.D. Bhole, D.L. Chen, E. Biro, G. Boudreau, and J. Van Deventer: Sci. Technol. Weld. Join., 2009, vol. 14, pp. 616–25.10.1179/136217109X12464549883295 ↗
25. S. Brauser, L.A. Pepke, G. Weber, and M. Rethmeier: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7099–7108.10.1016/j.msea.2010.07.091 ↗
26. I.A. Soomro and S.R. Pedapati: Int. J. Adv. Manuf. Technol., 2019, vol. 105, pp. 3249–60.10.1007/s00170-019-04569-2 ↗
27. X. Long and S.K. Khanna: Int. J. Fatigue, 2007, vol. 29, pp. 879–86.10.1016/j.ijfatigue.2006.08.003 ↗
28. M. Pouranvari and S.P.H. Marashi: Sci. Technol. Weld. Join, 2010, vol. 15, pp. 149–55.10.1179/136217109X12590746472535 ↗
29. C. Ma, D.L. Chen, S.D. Bhole, G. Boudreau, A. Lee, and E. Biro: Mater. Sci. Eng. A, 2008, vol. 485, pp. 334–46.10.1016/j.msea.2007.08.010 ↗
30. A. Ramazani, K. Mukherjee, A. Abdurakhmanov, M. Abbasi, and U. Prahl: Metals (Basel)., 2015, vol. 5, pp. 1704–16.10.3390/met5031704 ↗
31. H. Rezayat: The Role of Heterogeneous Constitutive Properties on Mechanical Behavior of Advanced High Strength Steel Spot Welds, PhD Dissertation, University of Tennessee, 2019.
32. V. Hernandez: Effects of Martensite Tempering on HAZ-Softening and Tensile Properties of Resistance Spot Welded Dual-Phase Steels, PhD Thesis, University of Waterloo, 2010.
33. M. Khan: Spot welding of advanced high strength steels (AHSS), Master Thesis, University of Waterloo, 2007.
34. M.M.H. Abadi and M. Pouranvari: Mater. Tehnol., 2014, vol. 48, pp. 67–71.
35. Y.S. Zhang, H.T. Sun, G.L. Chen, and X.M. Lai: Proc. Inst. Mech. Eng. Part B, 2009, vol. 223, pp. 1341–50.10.1243/09544054JEM1475 ↗
36. R. Koganti, S. Angotti, A. Wexler, and D.F. Maatz: SAE Tech. Pap., No. 2008-01-1113, 2008.
37. J. Pakkanen, R. Vallant, and M. Kičin: Weld. World., 2016, vol. 60, pp. 393–402.10.1007/s40194-016-0301-4 ↗
38. L. Prém, Z. Bézi, and A. Balogh: Adv. Mater. Res., 2016, vol. 1138, pp. 43–48.10.4028/www.scientific.net/AMR.1138.43 ↗
39. R. Koganti, S. Angotti, A. Joaquin, T. Coon, A. Wexler, and C. Orsette: SAE Tech. Pap, No. 2009-01-0805, 2009.
40. S. Dancette, D. Fabrègue, V. Massardier, J. Merlin, T. Dupuy, and M. Bouzekri: Eng. Fail. Anal., 2012, vol. 25, pp. 112–22.10.1016/j.engfailanal.2012.04.009 ↗
41. H. Wu, B. Zhao, H. Gao, Z.B. Zhao, and C. Liu: Appl. Mech. Mater., 2015, vol. 789–790, pp. 15–19.10.4028/www.scientific.net/AMM.789-790.15 ↗
42. V.H.B. Hernandez, Y. Okita, and Y. Zhou: Weld. J., 2012, vol. 91, pp. 278s–285s.
43. H. ErtekEmre and B. Bozkurt: Eng. Fail. Anal., 2020, vol. 110, p. 104439.10.1016/j.engfailanal.2020.104439 ↗
44. S. Ao, H. Shan, X. Cui, Z. Luo, Y.J. Chao, and M. Ma: Weld. World., 2016, vol. 60, pp. 1095–1107.10.1007/s40194-016-0384-y ↗
45. K. Chung, W. Noh, X. Yang, H.N. Han, and M.G. Lee: Int. J. Plast., 2017, vol. 94, pp. 122–47.10.1016/j.ijplas.2016.10.010 ↗
46. S.T. Wei, D. Lv, R.D. Liu, L. Lin, R.J. Xu, J.Y. Guo, and K.Q. Wang: Sci. Technol. Weld. Join., 2014, vol. 19, pp. 427–35.10.1179/1362171814Y.0000000211 ↗
47. S. Zhang, C. DiGiovanni, L. He, and N.Y. Zhou: Sci. Technol. Weld. Join., 2020, vol. 26, pp. 58–67.10.1080/13621718.2020.1833517 ↗
48. I. Hajiannia, M. Shamanian, M. Atapour, R. Ashiri, and S.A.E. Int: J. Mater. Manuf., 2018, vol. 12, pp. 4–18.
49. M. Shojaee, A.R.H. Midawi, B. Barber, H. Ghassemi-armaki, M. Worswick, and E. Biro: J. Manuf. Process., 2021, vol. 65, pp. 364–72.10.1016/j.jmapro.2021.03.047 ↗
50. X.D. Liu, Y.B. Xu, R.D.K. Misra, F. Peng, Y. Wang, and Y.B. Du: J. Mater. Process. Technol., 2019, vol. 263, pp. 186–97.10.1016/j.jmatprotec.2018.08.018 ↗
51. C. Luo and Y. Zhang: In MATEC Web Conf., 2019, vol. 269, p. 03002. EDP Sciences.10.1051/matecconf/201926903002 ↗
52. M. Pouranvari, S. Sobhani, and F. Goodarzi: J. Manuf. Process., 2018, vol. 31, pp. 867–74.10.1016/j.jmapro.2018.01.009 ↗
53. M. Tamizi, M. Pouranvari, and M. Movahedi: Sci. Technol. Weld. Join., 2017, vol. 22, pp. 327–35.10.1080/13621718.2016.1240979 ↗
54. Y. Li, H. Tang, and R. Lai: Processes, 2021, vol. 9, p. 1021.10.3390/pr9061021 ↗
55. H. Ghassemi-Armaki, E. Biro, and S. Sadagopan: ISIJ Int., 2017, vol. 57, pp. 1451–60.10.2355/isijinternational.ISIJINT-2016-649 ↗
56. J.K. Larsson: In proceeding of EUROJOIN 8., 2012, Pula, Croatia.
57. N. Tan, J. Hong, M. Lei, X. Jin, H. Zheng, and Z. Luo: Sci. Technol. Weld. Join., 2020, vol. 25, pp. 525–34.10.1080/13621718.2020.1751404 ↗
58. Y. Lu, A. Peer, T. Abke, M. Kimchi, and W. Zhang: Mater. Des., 2018, vol. 155, pp. 170–84.10.1016/j.matdes.2018.05.067 ↗
59. Y.S. Jong, Y.K. Lee, D.C. Kim, M.J. Kang, I.S. Hwang, and W.B. Lee: Mater. Trans., 2011, vol. 52, pp. 1330–33.10.2320/matertrans.M2011005 ↗
60. G. Janardhan, G. Mukhopadhyay, K. Kishore, and K. Dutta: J. Mater. Eng. Perform., 2020, vol. 29, pp. 3383–94.10.1007/s11665-020-04857-z ↗
61. A. Mohamadizadeh, E. Biro, and M. Worswick: Eng. Fract. Mech., 2022, vol. 268, 108506.10.1016/j.engfracmech.2022.108506 ↗
62. S. Acharya and K.K. Ray: Mater. Sci. Eng. A, 2013, vol. 565, pp. 405–13.10.1016/j.msea.2012.12.068 ↗
63. S.S. Rao, R. Chhibber, K.S. Arora, and M. Shome: J. Mater. Process. Technol., 2017, vol. 246, pp. 252–61.10.1016/j.jmatprotec.2017.03.027 ↗
64. G. Mukhopadhyay, S. Bhattacharya, and K.K. Ray: Mater. Des., 2009, vol. 30, pp. 2345–54.10.1016/j.matdes.2008.11.006 ↗
65. U. Ozsarac: J. Mater. Eng. Perform., 2012, vol. 21, pp. 748–55.10.1007/s11665-012-0189-0 ↗
66. D.C. Saha, S.S. Nayak, E. Biro, A.P. Gerlich, and Y. Zhou: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6153–62.10.1007/s11661-014-2591-8 ↗
67. M. Shamsujjoha, C.M. Enloe, A.C. Chuang, and J.J. Coryell: Materialia, 2020, vol. 15, 100975.10.1016/j.mtla.2020.100975 ↗
68. M. Tamizi, M. Pouranvari, and M. Movahedi: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 655–67.10.1007/s11661-020-06104-5 ↗
69. M.I. Khan, M.L. Kuntz, and Y. Zhou: Sci. Technol. Weld. Join., 2008, vol. 13, pp. 294–304.10.1179/174329308X271733 ↗
70. M. Xia, E. Biro, Z. Tian, and Y.N. Zhou: ISIJ Int., 2008, vol. 48, pp. 809–14.10.2355/isijinternational.48.809 ↗
71. I.O. Yilmaz, A.Y. Bilici, and H. Aydin: J. Cent. South Univ., 2019, vol. 26, pp. 25–42.10.1007/s11771-019-3980-3 ↗
72. S. Dancette, V. Massardier-Jourdan, D. Fabrègue, J. Merlin, T. Dupuy, and M. Bouzekri: ISIJ Int., 2011, vol. 51, pp. 99–107.10.2355/isijinternational.51.99 ↗
73. H. Rezayat, H. Ghassemi-armaki, and S.S. Babu, In proceedings of Trends in Welding Research, Proceedings of the 10th International Conference, Tokyo, Japan, 2016.
74. C. Rajarajan, P. Sivaraj, and V. Balasubramanian: Mater. Res. Express., 2020, vol. 7, 016555.10.1088/2053-1591/ab654d ↗
75. F. Nikoosohbat, S. Kheirandish, M. Goodarzi, M. Pouranvari, and S.P.H. Marashi: Mater. Sci. Technol., 2010, vol. 26, pp. 738–44.10.1179/174328409X414995 ↗
76. W. Guo, Z. Wan, P. Peng, Q. Jia, G. Zou, and Y. Peng: J. Mater. Process. Tech., 2018, vol. 256, pp. 229–38.10.1016/j.jmatprotec.2018.02.015 ↗
77. W. Li, L. Ma, P. Peng, Q. Jia, Z. Wan, Y. Zhu, and W. Guo: Mater. Sci. Eng. A, 2018, vol. 717, pp. 124–33.10.1016/j.msea.2018.01.050 ↗
78. D. Chandran, B. Figueredo, O. Sherepenko, W. Jin, Y. Park, and E. Biro: J. Manuf. Process., 2022, vol. 75, pp. 320–30.10.1016/j.jmapro.2022.01.019 ↗
79. O. Sherepenko and S. Jüttner: Weld. World, 2019, vol. 63, pp. 151–59.10.1007/s40194-018-0633-3 ↗
80. O. Sherepenko, A. Mohamadizadeh, A. Zvorykina, M. Worswick, E. Biro, and S. Jüttner: J. Mater. Sci., 2021, vol. 56, pp. 14287–97.10.1007/s10853-021-06165-w ↗
81. O. Sherepenko, O. Kazemi, P. Rosemann, M. Wilke, T. Halle, and S. Jüttner: Metals, 2019, vol. 10, p. 10.10.3390/met10010010 ↗
82. Y. Zhang, W. Xu, G. Zhang, W. Tao, and S. Yang: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 794–809.10.1007/s11661-021-06546-5 ↗
83. Y.B. Li, D.L. Li, S.A. David, Y.C. Lim, and Z. Feng: Sci. Technol. Weld. Join., 2016, vol. 21, pp. 555–63.10.1080/13621718.2016.1141493 ↗
84. D.S. Safanama, S.P.H. Marashi, and M. Pouranvari: Sci. Technol. Weld. Join., 2012, vol. 17, pp. 288–94.10.1179/1362171812Y.0000000006 ↗
85. M. Pouranvari and S.P.H. Marashi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 8337–43.10.1016/j.msea.2011.08.017 ↗
86. A.G. Kalashami, C. Digiovanni, M.H. Razmpoosh, F. Goodwin, and N.Y. Zhou: J. Manuf. Process., 2020, vol. 57, pp. 370–79.10.1016/j.jmapro.2020.07.008 ↗
87. ANSI/AWS/SAE Standard D8.9-97.
88. JIS Z 3140, japanese Ind. Stand. Committee, Tokyo, Japan.
89. D.J. Radakovic and M. Tumuluru: Weld. J., 2008, vol. 87, pp. 96–105.
90. M. Pouranvari: Sci. Technol. Weld. Join., 2018, vol. 23, pp. 520–26.10.1080/13621718.2017.1421303 ↗
91. M. Pouranvari: Mater. Sci. Eng. A, 2012, vol. 546, pp. 129–38.10.1016/j.msea.2012.03.040 ↗
92. S. Zhang: Int. J. Fract., 1997, vol. 88, pp. 167–85.10.1023/A:1007461430066 ↗
93. D. Radaj: Design and Analysis of Fatigue Resistant Welded Structures, Woodhead Publishing, Abington, 1990.10.1533/9781845698751 ↗