Microstructural Impact of Si and Ni During High Temperature Quenching and Partitioning Process in Medium-Mn Steels
Source abstract
Abstract
Abstract Austenite stabilization through carbon partitioning from martensite into austenite is an essential aspect of the quenching and partitioning (Q&P) process. Substitutional alloying elements are often included in the chemical composition of Q&P steels to further control the microstructure development by inhibiting carbide precipitation (silicon) and further stabilize austenite (manganese and nickel). However, these elements can interfere in the microstructure development, especially when high partitioning temperatures are considered. In this study, the microstructural development during the Q&P process of four low-carbon, medium-manganese steels with varying contents of silicon and nickel is investigated. During partitioning at 400 °C, silicon hinders cementite precipitation in primary martensite thereby assisting carbon partitioning from martensite to austenite. During partitioning at temperatures of 500 °C and 600 °C, presence of nickel inhibits pearlite formation and promotes austenite reversion, respectively. It is observed that the stabilization of austenite is significantly enhanced through the addition of nickel by slowing down the kinetics of competitive reactions that are stimulated during the partitioning stage. Results of this study provide an understanding of the interplay among carbon, silicon and nickel during Q&P processing that will allow the development of new design strategies to tailor the microstructure of this family of alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. D.K. Matlock and J.G. Speer: Microstructure and Texture in Steels, A. Haldar, S. Suwas, and D. Bhattacharjee, eds., Springer London, 2009, pp. 185–205.10.1007/978-1-84882-454-6_11 ↗
2. J.G. Speer, A.M. Streicher, D. Matlock, F. Rizzo, G. Krauss: Mater. Sci. Technol. Meeting, Chicago, IL; United States, 2009.
3. S. Oliver, T. B. Jones, and G. Fourlaris: Mater. Sci. Technol, 2007, vol. 23, pp. 423-431.10.1179/174328407X168937 ↗
4. J. Chiang, B. Lawrence, J.D. Boyd, A.K. Pilkey: Mater. Sci. Eng. A, 2011, vol. 528(13), pp. 4516-4521.10.1016/j.msea.2011.02.032 ↗
5. J.G. Speer, F. Rizzo, D. Matlock, D.V. Edmonds: Mater. Res., 2005, vol. 8(4), pp. 417-423.10.1590/S1516-14392005000400010 ↗
6. J.G. Speer, D.K. Matlock, B.C. De Cooman, J.G. Schroth: Acta Mater., 2003, vol. 51(9), pp. 2611-2622.10.1016/S1359-6454(03)00059-4 ↗
7. M.J. Santofimia, L. Zhao, J. Sietsma: Metall. Mater. Trans. A, 2008, vol. 40(1), pp. 46-57.10.1007/s11661-008-9701-4 ↗
8. G.A. Thomas, J.G. Speer, D.K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3652–3659.10.1007/s11661-011-0648-5 ↗
9. A. Arlazarov, M. Ollat, J.P. Masse, M. Bouzat: Mater. Sci. Eng. A, 2016, vol. 661, pp. 79–86.10.1016/j.msea.2016.02.071 ↗
10. A.S. Nishikawa, G. Miyamoto, T. Furuhara, A.P. Tschiptschin, H. Goldenstein: Acta Mater., 2019, vol. 179, pp. 1-16.10.1016/j.actamat.2019.08.001 ↗
11. J. Hidalgo, C. Celada-Casero, and M.J. Santofimia: Mater. Sci. Eng. A, 2019, vol. 754, pp. 766-777.10.1016/j.msea.2019.03.055 ↗
12. M.J. Santofimia, L. Zhao, I. Povstugar, P.P. Choi, D. Raabe, J. Sietsma: Proc 3rd int symp steel sci (ISSS 2012), N.H. Furuhara T, Ushioda K, Editor: Kyoto: The Iron and Steel Institute of Japan, 2012, vol. 155.
13. D. De Knijf, M.J. Santofimia, H. Shi, V. Bliznuk, C. Föjer, R. Petrov, W. Xu: Acta Mater., 2015, vol. 90, pp. 161-168.10.1016/j.actamat.2015.02.040 ↗
14. M. Gouné, S. Aoued, F. Danoix, G. Geandier, A.P. Quintin, J.C. Hell, M. Soler, S.Y.P. Allain: Scr. Mater., 2019, vol. 162, pp. 181-184.10.1016/j.scriptamat.2018.11.012 ↗
15. E.J. Seo, L. Cho, B.C. De Cooman: Acta Mater., 2016, vol. 107, pp. 354-365.10.1016/j.actamat.2016.01.059 ↗
16. Y. Toji, H. Matsuda, M. Herbig, P.P. Choi, D. Raabe: Acta Mater., 2015, vol. 65, pp. 215-228.10.1016/j.actamat.2013.10.064 ↗
17. K. Kim, and S.J. Lee: Mater. Sci. Eng. A, 2017, vol. 698, pp. 183-190.10.1016/j.msea.2017.05.030 ↗
18. F. Rizzo, A.R. Martins, J.G. Speer, D.K. Matlock, A. Clarke, and B.C. De Cooman: Mater. Sci. Forum, 2007, vol. 539, pp. 4476–81.10.4028/www.scientific.net/MSF.539-543.4476 ↗
19. D.T. Pierce, D.R. Coughlin, K.D. Clarke, E. De Moor, J. Poplawsky, D.L. Williamson, B. Mazumder, J.G. Speer, A. Hood, A.J. Clarke: Acta Mater., 2018, vol. 151, pp. 454-469.10.1016/j.actamat.2018.03.007 ↗
20. R. Ding, Z. Dai, M. Huang, Z. Yang, C. Zhang, H. Chen: Acta Mater., 2018, vol. 147, pp. 59-69.10.1016/j.actamat.2018.01.009 ↗
21. C.F. Jatczak: SAE Technical Paper, 1980, 800426.
22. D.J. Dyson, B. Holmes, J. Iron Steel Inst., 1970, vol. 208, pp. 469-474.
23. N. Vandijk, A. Butt, L. Zhao, J. Sietsma, S. Offerman, J. Wright, S. Vanderzwaag: Acta Mater., 2005, vol. 53(20), pp. 5439-5447.10.1016/j.actamat.2005.08.017 ↗
24. L. Zhao, N.H. Van Dijk, E. Bruck, J. Sietsma, S. Van der Zwaag, Mater. Sci. Eng. A, 2001, vol. 313(1), pp. 145-152.10.1016/S0921-5093(01)00965-0 ↗
25. B.D. Cullity, C.D. Graham: Introduction to Magnetic Materials, 2nd ed., IEEE/Wiley, Hoboken, New Jersey, 2009.
26. A.W. El-Morsy and A.I.Z. Farahat: J. Eng. Mater. Technol., 2017, vol. 140 (2), art. no. 021005.10.1115/1.4038393 ↗
27. S. Ayenampudi, C. Celeda-Casero, J. Siestma, M.J. Santofimia: Mater., 2019, vol. 8, pp. 100492.
28. S. Yang, H.K.D.H. Bhadeshia: Mater. Sci. Techol., 2007, vol. 23, pp. 556–560.10.1179/174328407X176857 ↗
29. H. Kim, J. Inoue, M. Okada and K. Nagata: ISIJ Int., 2017, vol. 57 (12), pp. 2229-2236.10.2355/isijinternational.ISIJINT-2017-212 ↗
30. C. Celada-Casero, C. Kwakernaak, J. Sietsma, M.J. Santofimia: Mater. Des., 2019, vol. 178, pp. 107847.10.1016/j.matdes.2019.107847 ↗
31. M.J. Santofimia, L. Zhao, and J. Sietsma: Mater. Sci. Forum, 2012, vol. 706-709, pp. 2290-2295.10.4028/www.scientific.net/MSF.706-709.2290 ↗
32. R. Kannan, Y. Wang, and L. Li: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 948-952.10.1007/s11661-016-3924-6 ↗
33. R. Ding, D. Tang, and A. Zhao: Scr. Mater., 2014, vol. 88, pp. 21-24.10.1016/j.scriptamat.2014.06.014 ↗
34. R. Wei, M. Enomoto, R. Hadian, H.S. Zurob, G.R. Purdy: Acta Mater., 2013, vol. 61(2), pp. 697-707.10.1016/j.actamat.2012.10.019 ↗
35. F. HajyAkbary, J. Sietsma, G. Miyamoto, T. Furuhara, M.J. Santofimia: Acta Mater., 2016, vol. 104, pp. 72-83.10.1016/j.actamat.2015.11.032 ↗
36. H.K.D.H. Bhadeshia, D.V. Edmonds: Metall. Trans. A, 1979, vol. 10, pp. 895-907.10.1007/BF02658309 ↗
37. G. Krauss and A.R. Marder: Metall. Trans., 1971, vol. 2, pp. 2343-2357.10.1007/BF02814873 ↗
38. A. Koniger, C. Hammerl, M. Zeitler and B. Rauschenbach: Phys. Rev. B, 1997, 55(13), 8143-8147.10.1103/PhysRevB.55.8143 ↗
39. J.I. Kim, J.W. Morris: Metall. Trans. A, 1981, vol. 12(11), pp. 1957-1963.10.1007/BF02643809 ↗
40. S.J. Kim, C.G. Lee, T.H. Lee, C.S. Oh: Scr. Mater., 2003, 48, 539-544.10.1016/S1359-6462(02)00477-3 ↗
41. N. Zhu, Q. Wu, Y. He, X. Lu, L. Li and P. Hu: Steel Res. Int., 2014, vol. 85(2), pp. 143-154.10.1002/srin.201300098 ↗
42. D. A. Scott: Ph.D Thesis, 1947, The University of British Columbia, Canada, 1947.
43. H.K.D.H. Bhadeshia: Met. Sci., 1982, vol. 16, pp. 159-165.10.1179/030634582790427217 ↗
44. T. Sourmail, H.K.D.H. Bhadeshia: Calphad, 2003, vol. 27, pp. 169-175.10.1016/j.calphad.2003.08.002 ↗
45. A. Borgenstam, L. Hoglund, J. Agren, A. Engstrom: J. Phase Equilibria., 2000, vol. 21, pp. 269.10.1361/105497100770340057 ↗
46. C.A. Apple, R.N. Caron and G. Krauss: Metall. Trans. A, 1974, vol. 5, pp. 593-599.10.1007/BF02644654 ↗
47. T. Swarr and G. Krauss: Metall. Trans. A, 1976, vol. 7A, pp. 41-48.10.1007/BF02644037 ↗
48. Marder AR: Ph.D. Thesis, Lehigh University, 1968.
49. Y. Xia, M. Enomoto, Z. Yang, Z. Li and C. Zhang: Phil. Mag., 2013, vol. 93 (9), pp. 1095-1109.10.1080/14786435.2012.744484 ↗
50. Z.D. Li, G. Miyamoto, Z.G. Yang and T. Furuhara: Metall. Mat. Trans. A, 2011, vol. 42A, pp. 1586-1596.10.1007/s11661-010-0560-4 ↗
51. J. Wang, P.J. Van der Wolk and S. Van der Zwaag: Mater. Trans., 2000, vol. 41 (7), pp. 761-768.10.2320/matertrans1989.41.761 ↗